ED-HMI2002-070C arụ ọrụ akpaaka na njikwa
“
Nkọwapụta
- Ụdị: ED-HMI2002-070C
- Nha ihuenyo: 7-inch LCD ihuenyo mmetụ
- Ihe nhazi: Raspberry Pi 4
- RAM: Enwere ike ịhazi ya dabere na mkpa onye ọrụ
- Nchekwa: Sistemu kaadị SD, nhazi dabere na mkpa onye ọrụ
- Igwefoto: 8 megapixel n'ihu igwefoto (nhọrọ)
- ọdụ ụgbọ mmiri USB: 2 x USB 3.0, 2 x USB 2.0
- Audio: Jack audio 3.5mm maka igwe okwu n'ime na stereo pụta
- ọdụ ụgbọ mmiri HDMI: 2 x micro-HDMI na-akwado 4K 60Hz
- Ntinye ike: USB Ụdị-C, 5V 3A
Ntuziaka ojiji ngwaahịa
1. Akụrụngwa Kwụsịrịview
ED-HMI2002-070C bụ HMI ụlọ ọrụ inch 7 kwadoro ya
Raspberry Pi 4. Ọ na-enye RAM na kaadị SD nwere ike ịhazi ya
dabara dị iche iche onye ọrụ mkpa.
2. Ndepụta nkwakọ ngwaahịa
Gbaa mbọ hụ na ngwugwu ahụ gụnyere ihe niile dị mkpa edepụtara na ya
ngalaba ndepụta mkpọ nke akwụkwọ ntuziaka.
3. Ọdịdị
3.1 Ogwe ihu
N'ihu panel atụmatụ a 7-inch LCD ihuenyo mmetụ na a
mkpebi nke ruo 1024 × 600 na multipoint capacitive
ihuenyo mmetụ aka. Igwefoto n'ihu 8 Megapixel nhọrọ nwere ike ịbụ
gụnyere.
3.2 Ogwe azụ
Ogwe azụ na-agụnye oghere nrụnye maka eriri iji chekwaa
ngwaọrụ n'oge echichi.
3.3 Akụkụ akụkụ
The akụkụ panel mejupụtara dị iche iche interfaces gụnyere
Ethernet, ọdụ ụgbọ mmiri USB, jakị ọdịyo, ọdụ ụgbọ mmiri HDMI, na ntinye ike.
4. Ngosipụta
Ọkụ ndị na-egosi na-enye ozi na ọnọdụ nke
Njikọ Ethernet, yana ihe ngosi edo edo na akwụkwọ ndụ akwụkwọ ndụ na-egosi
steeti dị iche iche.
5. Interface
5.1 Ike inye
Jikọọ ntinye ike USB Ụdị-C na ihe nkwụnye ọkụ 5V 3A na
hụ na arụmọrụ kacha mma nke Raspberry Pi 4.
5.2 1000M Ethernet
Ọnụ ọnụ RJ45 nwere ihe nrịbama na-enye ohere ịnweta mgbanwe
10/100/1000M Ethernet ọdụ ụgbọ mmiri maka njikọ netwọk.
FAQ
Ajụjụ: Enwere m ike ịkwalite RAM na ED-HMI2002-070C?
A: Ee, RAM na ED-HMI2002-070C bụ ahaziri iji zute
dị iche iche chọrọ.
Ajụjụ: Kedu otu m ga-esi jikọọ ngwaọrụ mpụga na HMI?
A: Ị nwere ike iji ọdụ ụgbọ mmiri USB, ọdụ ụgbọ mmiri HDMI, na jakị ọdịyo
jikọọ ngwaọrụ mpụga dị ka ahụigodo, oke, ihe ngosi, na
ekweisi.
"'
ED-HMI2002-070C
Akwụkwọ ntuziaka onye ọrụ
nke EDA Technology Co., Ltd wuru: 2025-08-01
ED-HMI2002-070C
1 Akwụkwọ ntuziaka ngwaike
Isiakwụkwọ a na-ewebata ngwaahịa ahụview, mbukota ndepụta, ọdịdị, egosi na interface.
1.1 gafereview
ED-HMI2002-070C bụ 7-inch ulo oru HMI dabeere na Raspberry Pi 4. Dị ka dị iche iche ngwa ndapụta na mkpa onye ọrụ, dị iche iche nkọwa nke RAM na SD kaadị kọmputa usoro.
· RAM nwere ike ịhọrọ 1GB, 2GB, 4GB na 8GB · Kaadị SD nwere ike ịhọrọ 32GB na 64GB ED-HMI2002-070C na-enye HDMI, USB 2.0, USB 3.0 na Ethernet interfaces, na-akwado ịnweta netwọk site na Wi-Fi na Ethernet. ED-HMI2002-070C na-ejikọta ihuenyo mmetụ LCD 7-inch ma na-ejikarị na njikwa ụlọ ọrụ na IOT.
1.2 Ndepụta nkwakọ ngwaahịa
Nkeji 1 x ED-HMI2002-070C
1.3 Ọdịdị
Na-ewebata ọrụ na nkọwa nke interfaces na panel nke ọ bụla.
1.3.1 Ogwe ihu
Nkebi a na-ewebata ọrụ na nkọwa nke ihu panel.
Email: sales@edatec.cn / support@edatec.cn WebEbe: www.edatec.cn
|
Ekwentị: +86-15921483028(China) | +86-18217351262(Office)
ED-HMI2002-070C
Mba.
Nkọwa ọrụ
Ngosipụta 1 x LCD, ihuenyo mmetụ LCD 7-inch, nke na-akwado 1024 × 600 na multipoint capacitive 1.
ihuenyo mmetụ aka.
2
Igwefoto 1 x (nhọrọ), igwefoto n'ihu 8 megapixel.
1.3.2 Ogwe azụ
Nkebi a na-ewebata interfaces na nkọwa nke azụ panel.
Mba.
Nkọwa ọrụ
4 x oghere ntinye nke eriri, nke a na-eji dozie eriri na ngwaọrụ (maka iji mgbe 1
ịwụnye ngwaọrụ).
1.3.3 Akụkụ akụkụ
Akụkụ a na-ewebata interfaces na nkọwa nke akụkụ akụkụ.
Email: sales@edatec.cn / support@edatec.cn WebEbe: www.edatec.cn
|
Ekwentị: +86-15921483028(China) | +86-18217351262(Office)
ED-HMI2002-070C
Mba.
Nkọwa ọrụ
1
1 x Ethernet interface (10/100/1000M adaptive), RJ45 ọnụ maka ịnweta Ethernet.
2
2 x USB 3.0 ọdụ ụgbọ mmiri, ụdị-A njikọ, ọwa ọ bụla na-akwado ruo 5Gbps.
3
2 x USB 2.0 ọdụ ụgbọ mmiri, ụdị-A njikọ, ọwa ọ bụla na-akwado ruo 480Mbps.
4
1 x Audio In/Stereo Out, Jack audio 3.5mm maka igwe okwu na stereo pụta.
5
2 x HDMI ọdụ ụgbọ mmiri, micro-HDMI njikọ, nke nwere ike jikọọ a ngosi na-akwado 4K 60Hz.
6
1 x USB Ụdị-C njikọ, nke na-akwado ntinye ike 5V 3A.
7
Oghere ikposa ọkụ, nke na-enyere aka melite arụmọrụ jụrụ oyi.
8
Oghere ikposa ọkụ, nke na-enyere aka melite arụmọrụ jụrụ oyi.
1.4 Ihe ngosi
Akụkụ a na-ewebata ọkwa dị iche iche na nkọwa nke ihe ngosi dị na EDHMI2002-070C.
Ihe ngosi odo odo nke ọdụ ụgbọ mmiri Ethernet
Ọnọdụ Gbanyụọ ọkụ
Nkọwa Njikọ Ethernet dị na steeti nkịtị. Njikọ Ethernet adịghị mma. Edobeghi njikọ Ethernet.
Email: sales@edatec.cn / support@edatec.cn WebEbe: www.edatec.cn
|
Ekwentị: +86-15921483028(China) | +86-18217351262(Office)
ED-HMI2002-070C
Ihe ngosi Green nke ọdụ ụgbọ mmiri Ethernet
Ọnọdụ Gbanyụọ ọkụ
Nkọwa Njikọ Ethernet dị na steeti nkịtị. A na-ebufe data n'ọdụ ụgbọ mmiri Ethernet. Edobeghi njikọ Ethernet.
1.5 interface
Na-ewebata nkọwa na ọrụ nke interface ọ bụla na ngwaahịa ahụ.
1.5.1 Ike inye
ED-HMI2002-070C gụnyere otu ntinye ike, na silkscreen bụ "PWR IN". Njikọ ahụ bụ USB Type-C, nke na-akwado ntinye ike 5V 3A.
NDỤMỌDỤ
Ka Raspberry Pi 4 rụpụta arụmọrụ ka mma, a na-atụ aro ka iji ihe nkwụnye ọkụ 5V 3A.
1.5.2 1000M Ethernet
ED-HMI2002-070C gụnyere otu ọdụ ụgbọ mmiri Ethernet 10/100/1000M, ọnụ RJ45 nwere
egosi na silkscreen bụ "" nke a na-eji nweta Ethernet. Akọwapụtara ntụtụ kwekọrọ na ọnụ ọnụ dị ka ndị a
NJ pin 1 2 3 4 5 6 7 8
Aha pin TX1+ TX1TX2+ TX2TX3+ TX3TX4+ TX4-
Email: sales@edatec.cn / support@edatec.cn WebEbe: www.edatec.cn
|
Ekwentị: +86-15921483028(China) | +86-18217351262(Office)
ED-HMI2002-070C
1.5.3 Audio
Ngwa ED-HMI2002-101C nwere interface ọdịyo 1, ọnụ ekwe ntị akụkụ anọ nke 3.5mm, na silkscreen bụ "". Ọ na-akwado nkọwapụta OMTP stereo ekweisi na ndekọ igwe okwu otu ọwa.
1.5.4 HDMI
ED-HMI2002-070C gụnyere ọdụ ụgbọ mmiri 2 HDMI, na silkscreen bụ "HDMI". Njikọ bụ microHDMI, nke nwere ike jikọọ na HDMI ngosi ma na-akwado ruo 4Kp60.
1.5.5 eriri USB 2.0
ED-HMI2002-070C gụnyere 2 USB 2.0 ọdụ ụgbọ mmiri, na silkscreen bụ "". Njikọ bụ USB Ụdị-A, nke nwere ike jikọọ na ọkọlọtọ USB 2.0 peripherals na-akwado ruo 480Mbps.
1.5.6 eriri USB 3.0
ED-HMI2002-070C gụnyere 2 USB 3.0 ọdụ ụgbọ mmiri, na silkscreen bụ "". Njikọ bụ USB Ụdị-A, nke nwere ike jikọọ na ọkọlọtọ USB 3.0 peripherals na-akwado ruo 5Gbps.
Email: sales@edatec.cn / support@edatec.cn WebEbe: www.edatec.cn
|
Ekwentị: +86-15921483028(China) | +86-18217351262(Office)
ED-HMI2002-070C
2 Ịwụnye Ngwaọrụ
Isiakwụkwọ a na-akọwa arụmọrụ akọwapụtara maka ịwụnye ngwaọrụ.
2.1 Ịwụnye Raspberry Pi 4 (nhọrọ)
Ọ bụrụ na ụdị ngwaahịa nke onye ahịa zụtara agụnyeghị Raspberry Pi 4, Raspberry Pi 4 kwesịrị ibu ụzọ tinye ya. Nkwadebe
ED-HMI2002-070C na kaadị SD enwetala site na igbe nkwakọ ngwaahịa. · Raspberry Pi 4 adịla njikere. · A kwadobela screwdriver cross. Nzọụkwụ 1. Fanye kaadị SD n'ime oghere kaadị SD nke Raspberry Pi 4.
2. Jiri screwdriver tọpụ skru 4 M3 na ED-HMI2002-070C n'akụkụ elekere, wee wepụ ikpe ahụ.
Email: sales@edatec.cn / support@edatec.cn WebEbe: www.edatec.cn
|
Ekwentị: +86-15921483028(China) | +86-18217351262(Office)
ED-HMI2002-070C
3. Jiri screwdriver ka ịtọghe skru 3 M2.5 na ED-Pi4PCOOLER n'akụkụ elekere, wee wepụ ngwa nju oyi.
Email: sales@edatec.cn / support@edatec.cn WebEbe: www.edatec.cn
|
Ekwentị: +86-15921483028(China) | +86-18217351262(Office)
ED-HMI2002-070C
NDỤMỌDỤ – ED-Pi4PCOOLER bụ ngwa jụrụ oyi. – Ọ bụrụ na e nwere ihe nkiri nke thermal conductive silicone, biko wepụ ya. 4. Debe Raspberry Pi 4 n'azụ ihuenyo LCD ka oghere ntinye nke Raspberry Pi 4 wee kwekọọ na oghere stud anọ dị n'azụ ihuenyo LCD.
5. Nyefee eriri FPC site na oghere echekwara na ED-Pi4PCOOLER.
6. Tinye eriri FPC n'ime CAMERA ma gosipụta ọdụ ụgbọ mmiri nke Raspberry Pi 4 n'otu n'otu.
7. Mee oghere 3 na-arị elu nke ED-Pi4PCOOLER na-ejikọta ya na oghere nkwụnye nke Raspberry Pi 4.
Email: sales@edatec.cn / support@edatec.cn WebEbe: www.edatec.cn
|
Ekwentị: +86-15921483028(China) | +86-18217351262(Office)
ED-HMI2002-070C
8. Fanye 3 M2.5 * 12 skru na 1 M2.5 * 5 screw, wee mechie ha n'akụkụ elekere iji chekwaa Raspberry Pi 4 na ED-Pi4PCOOLER n'akụkụ azụ nke ihuenyo LCD.
9. Tinye eriri ike n'ime 40-Pin kwekọrọ na Raspberry Pi 4.
10. Kpuchie ikpe ahụ, tinye skru 4 M3, ma mee ka ihu igwe kwụsie ike iji dozie ikpe ahụ n'azụ ihuenyo LCD.
Email: sales@edatec.cn / support@edatec.cn WebEbe: www.edatec.cn
|
Ekwentị: +86-15921483028(China) | +86-18217351262(Office)
ED-HMI2002-070C
2.2 Ntinye agbakwunyere
Ngwa ED-HMI2002-070C na-akwado ntinye n'ihu agbakwunyere. Ngwugwu ọkọlọtọ anaghị agụnye ngwa mgbakwunye panel, biko zụta ED-ACCHMI-Front n'aka ndị nkesa anyị tupu oge eruo. Nkwadebe
ED-ACCHMI-Enwetara ngwa ngwa ngwa ihu (nwere 4xbuckles, 4xM4*10 skru na 4xM4*16 skru).
· A kwadobela screwdriver cross. Nzọụkwụ 1. hụ na oghere oghere nke kabinet dị ka nha ED-HMI2002-070C si dị, dị ka egosiri na
foto dị n'okpuru.
2. Gwuo oghere na kabinet dị ka oghere nke nzọụkwụ1 si dị. 3. Tinye ED-HMI2002-070C n'ime kabinet si n'èzí.
4. Kwado oghere nkedo (oghere na-enweghị eriri) nke eriri ahụ na oghere ntinye eriri na ngwaọrụ ahụ.
Email: sales@edatec.cn / support@edatec.cn WebEbe: www.edatec.cn
|
Ekwentị: +86-15921483028(China) | +86-18217351262(Office)
ED-HMI2002-070C
5. Jiri 4 M4 * 10 skru gafere site na eriri ahụ ma mechie ya na elekere iji dozie eriri ahụ na ngwaọrụ ahụ; wee jiri skru 4 M4 * 16 gafere site na oghere skru (threaded oghere) nke eriri ahụ wee mechie elekere ruo na njedebe site na eriri.
Email: sales@edatec.cn / support@edatec.cn WebEbe: www.edatec.cn
|
Ekwentị: +86-15921483028(China) | +86-18217351262(Office)
ED-HMI2002-070C
3 Ịtinye ngwaọrụ ahụ
Isiakwụkwọ a na-ewebata ka esi jikọọ eriri na buut ngwaọrụ.
3.1 Njikọ eriri
Akụkụ a na-akọwa otu esi ejikọta eriri. Nkwadebe
Ngwa dị ka ngosi, òké, ahụigodo na ihe nkwụnye ọkụ nke enwere ike iji ya adịla njikere.
Netwọk enwere ike iji ya eme ihe. Nweta eriri HDMI na eriri netwọk nke enwere ike iji ya mee ihe. Eserese atụmatụ nke eriri njikọ: Biko rụtụ aka na interface 1.5 maka nkọwa ntụtụ nke interface ọ bụla yana usoro a kapịrị ọnụ nke wiring.
Email: sales@edatec.cn / support@edatec.cn WebEbe: www.edatec.cn
|
Ekwentị: +86-15921483028(China) | +86-18217351262(Office)
ED-HMI2002-070C
3.2 Na-ebulite sistemụ ahụ maka oge mbụ
ED-HMI2002-070C enweghị mgba ọkụ. Mgbe ejikọrọ ọkụ eletrik, usoro ahụ ga-amalite.
A na-etinye ngwaahịa ahụ na sistemụ ụdị Desktọpụ mgbe ọ hapụrụ ụlọ ọrụ ahụ. Mgbe ngwaọrụ malitere, ọ ga-abanye ozugbo na desktọpụ.
Email: sales@edatec.cn / support@edatec.cn WebEbe: www.edatec.cn
|
Ekwentị: +86-15921483028(China) | +86-18217351262(Office)
ED-HMI2002-070C
NDỤMỌDỤ NDỊ ana-akpọ aha bụ pi , Paswọọdụ ndabara bụ raspberry . Maka ozi ndị ọzọ gbasara arụmọrụ nhazi Raspberry Pi 4, biko rụtụ aka na akwụkwọ dị na onye ọrụ Raspberry Pi websaịtị. Ụzọ akwụkwọ bụ:Raspberry Piopen na ọhụrụ w (https://www.raspberrypi.com/) .
Email: sales@edatec.cn / support@edatec.cn WebEbe: www.edatec.cn
|
Ekwentị: +86-15921483028(China) | +86-18217351262(Office)
ED-HMI2002-070C
4 Nbanye nbanye
Isiakwụkwọ a na-ewebata ka esi abanye ngwaọrụ n'ime ime.
4.1 Ịchọta ngwaọrụ IP
ịchọta ngwaọrụ IP
4.2 Ijikọ na Desktọpụ Ngwaọrụ Site na VNC
Mgbe ngwaọrụ na-amalite na-adịkarị, ị nwere ike họrọ ka remotely jikọọ na ngwaọrụ site VNC hazi ma ọ bụ debug ya. Nkwadebe:
· RealVNC Viewer ngwá ọrụ arụnyere na PC. ED-HMI2002-070C ejikọrọ na netwọk site na rawụta. Nweta adreesị IP nke ED-HMI2002-070C. · Agbanyela ọrụ VNC na sistemu ED-HMI2002-070C, dịka egosiri na
na-eso ọgụgụ.
Nzọụkwụ:
1. Mepee RealVNC Viewer wee họrọ “njikọ ọhụrụ…” na File na menu mmanya imepe mpio maka ịmepụta njikọ, dị ka egosiri na foto a.
Email: sales@edatec.cn / support@edatec.cn WebEbe: www.edatec.cn
|
Ekwentị: +86-15921483028(China) | +86-18217351262(Office)
ED-HMI2002-070C
2. Mgbe ịbanye na adreesị IP nke ED-HMI2002-070C, pịa "OK".
Email: sales@edatec.cn / support@edatec.cn WebEbe: www.edatec.cn
|
Ekwentị: +86-15921483028(China) | +86-18217351262(Office)
ED-HMI2002-070C
3. Tinye aha njirimara na paswọọdụ n'ime igbe nyocha nke na-apụta.
NDỤMỌDỤ NDỊ ana-akpọ aha bụ pi , Paswọọdụ ndabara bụ raspberry .
4. Họrọ "OK" ka ịbanye na jikọọ na desktọọpụ dịpụrụ adịpụ.
Email: sales@edatec.cn / support@edatec.cn WebEbe: www.edatec.cn
|
Ekwentị: +86-15921483028(China) | +86-18217351262(Office)
ED-HMI2002-070C
Email: sales@edatec.cn / support@edatec.cn WebEbe: www.edatec.cn
|
Ekwentị: +86-15921483028(China) | +86-18217351262(Office)
ED-HMI2002-070C
5 Ịwụnye OS (nhọrọ)
Ọ bụrụ na ị na-azụta ngwaọrụ na-enweghị Raspberry Pi 4 na kaadị SD, ngwaọrụ ahụ anaghị abịa na sistemụ arụmọrụ na ndabara. Raspberry Pi 4 kwesịrị ibu ụzọ tinye ya, mgbe ahụ ịkwesịrị ịwụnye os. Ụlọ ọrụ anyị na-akwado ịwụnye OS site na ịwụnye ọkọlọtọ Raspberry Pi OS mbụ, wee wụnye ngwugwu Firmware.
Ọ bụrụ na ị na-azụta ngwaọrụ na Raspberry Pi 4 na kaadị SD, a na-ebufe ngwaọrụ ahụ na sistemụ arụmọrụ na ndabara. Ọ bụrụ na OS mebiri emebi n'oge eji ma ọ bụ onye ọrụ kwesịrị iji dochie OS, ọ dị mkpa ka ibudata ihe oyiyi usoro kwesịrị ekwesị ma wụnye ya. Ụlọ ọrụ anyị na-akwado ịwụnye OS site na ịwụnye ọkọlọtọ Raspberry Pi OS mbụ, wee wụnye ngwugwu Firmware.
Akụkụ na-esonụ na-akọwa kpọmkwem ọrụ nbudata onyonyo, kaadị SD na-egbu maramara na ntinye nke ngwugwu firmware.
NDỤMỌDỤ
Biko jide n'aka na ị rụnyere ngwugwu Firmware anyị ka ị wụnyechara Standard Raspberry Pi OS, ma ọ bụghị ya, ngosi na aka agaghị arụ ọrụ.
5.1 Nbudata OS File
Ị nwere ike budata Raspberry Pi OS gọọmentị kwekọrọ file dị ka mkpa gị n'ezie si dị, e depụtara ụzọ nbudata n'okpuru:
OS
Budata ụzọ
Raspberry Pi OS(Desktọpụ) 64-bit-bookworm (Debian 12)
https://downloads.raspberrypi.com/raspios_arm64/images/ raspios_arm64-2024-07-04/2024-07-04-raspios-bookworm-arm64.img.xz (https://downloads.raspberrypi.com/raspios_arm64/images/ raspios_arm64-2024-07-04/2024-07-04-raspios-bookworm-arm64.img.xz)
Raspberry Pi OS(Lite) 64-bit-bookworm (Debian 12)
https://downloads.raspberrypi.com/raspios_lite_arm64/images/ raspios_lite_arm64-2024-07-04/2024-07-04-raspios-bookworm-arm64lite.img.xz (https://downloads.raspberrypi.com/raspios_lite_arm64/images/ raspios_lite_arm64-2024-07-04/2024-07-04-raspios-bookworm-arm64lite.img.xz)
Raspberry Pi OS(Desktọpụ) 32-bit-bookworm (Debian 12)
https://downloads.raspberrypi.com/raspios_armhf/images/ raspios_armhf-2024-07-04/2024-07-04-raspios-bookworm-armhf.img.xz (https://downloads.raspberrypi.com/raspios_armhf/images/ raspios_armhf-2024-07-04/2024-07-04-raspios-bookworm-armhf.img.xz)
Raspberry Pi OS(Lite) 32-bit-bookworm (Debian 12)
https://downloads.raspberrypi.com/raspios_lite_armhf/images/ raspios_lite_armhf-2024-07-04/2024-07-04-raspios-bookworm-armhf-
Email: sales@edatec.cn / support@edatec.cn WebEbe: www.edatec.cn
|
Ekwentị: +86-15921483028(China) | +86-18217351262(Office)
ED-HMI2002-070C
OS
Budata ụzọ
lite.img.xz (https://downloads.raspberrypi.com/raspios_lite_armhf/images/ raspios_lite_armhf-2024-07-04/2024-07-04-raspios-bookworm-armhflite.img.xz)
5.2 Na-egbuke egbuke na kaadị SD
A na-atụ aro ka iji ngwa ọrụ gọọmentị Raspberry Pi. Ụzọ nbudata bụ ndị a:
Ihe onyonyo Raspberry Pi: https://downloads.raspberrypi.org/imager/imager_latest.exe (https://downloads.raspberrypi.org/imager/imager_latest.exe)
Onye nhazi kaadị SD: https://www.sdcardformatter.com/download/ (https://www.sdcardformatter.com/download/)
Nkwadebe:
· The nbudata na echichi nke ukara ngwá ọrụ na kọmputa e dechara. · A kwadola onye na-agụ kaadị SD. · Os file enwetala.
Nzọụkwụ:
A na-akọwa usoro ndị a site na iji sistemụ Windows dị ka example.
1. Mepee igbe ngwaọrụ, wee wepụ kaadị SD. a. Wepu ihe mkpuchi ọla nke ED-HMI2002-070C site na iji screwdriver kpughee skru 4 M3 n'okirikiri igwe n'akụkụ elekere.
b. Wepu Raspberry Pi 4 site n'ịkpọghee skru anọ ahụ na-eji screwdriver na-agbago Raspberry Pi 4 n'akụkụ elekere. c. Wepụ kaadị SD na kaadị SD nke Raspberry Pi 4.
2. Fanye kaadị SD n'ime kaadị agụ, wee tinye kaadị agụ n'ime USB n'ọdụ ụgbọ mmiri nke kọmputa gị.
3. Mepee SD Card Formatter, họrọ formatted mbanye leta, wee pịa "Format" na ala nri ka usoro.
Email: sales@edatec.cn / support@edatec.cn WebEbe: www.edatec.cn
|
Ekwentị: +86-15921483028(China) | +86-18217351262(Office)
ED-HMI2002-070C
4. N'ime igbe mmapụta, họrọ "Ee". 5. Mgbe formatting na dechara, pịa "OK" na ozugbo igbe. 6. Mechie SD Card Formatter. 7. Mepee Raspberry Pi Imager, họrọ "CHỌRỌ OS" wee họrọ "Jiri omenala" na mmapụta.
pane.
8. Dị ka ngwa ngwa, họrọ OS file n'okpuru ụzọ onye ọrụ akọwapụtara wee laghachi na ibe isi.
9. Pịa "Họrọ nchekwa", họrọ ngwaọrụ ndabara na interface "Nchekwa", ma laghachi na isi peeji.
10. Pịa “ỌZỌ”, họrọ “NO” na mmapụta “Jiri Os customization?” pane.
Email: sales@edatec.cn / support@edatec.cn WebEbe: www.edatec.cn
|
Ekwentị: +86-15921483028(China) | +86-18217351262(Office)
ED-HMI2002-070C
11. Họrọ "EH" na mmapụta "Ịdọ aka ná ntị" ka ịmalite ide ihe oyiyi ahụ.
12. Mgbe OS ederede dechara, na file a ga-enyocha ya.
13. Mgbe nkwenye na-agwụ agwụ, pịa "Na-aga n'ihu" na pop-up "Dee ihe ịga nke ọma" igbe. 14. Mechie Raspberry Pi Imager, wepụ kaadị SD. 15. Fanye kaadị SD n'ime oghere kaadị SD nke Raspberry Pi 4 wee mechie igbe ngwaọrụ.
a. Fanye kaadị SD n'ime oghere kaadị SD nke Raspberry Pi 4.
Email: sales@edatec.cn / support@edatec.cn WebEbe: www.edatec.cn
|
Ekwentị: +86-15921483028(China) | +86-18217351262(Office)
ED-HMI2002-070C
b. Chekwaa Raspberry Pi 4 site na imechi skru 4 maka iji screwdriver were were screwdriver na-agbanye Raspberry Pi 4 n'akụkụ elekere.
c. Mee ka skru 4 M3 dị na igwe ọla nke ED-HMI2002-070C n'akụkụ elekere na screwdriver wee mechie igbe ngwaọrụ.
5.3 Ịwụnye ngwugwu Firmware
Mgbe ị wụnye ọkọlọtọ Raspberry Pi OS na ED-HMI2002-070C.Ịkwesịrị ịhazi usoro ahụ site na ịgbakwunye edatec apt source na ịwụnye ngwugwu ngwa ngwa iji mee ka usoro ahụ rụọ ọrụ. Ihe na-esonụ bụ example nke Debian 12 (bookworm) ụdị desktọpụ.
Nkwadebe:
· Emechaala kaadị SD nke Raspberry Pi ọkọlọtọ OS (bookworm). · Ngwa a na-agba ọsọ nke ọma na nhazi buut dị mkpa emechaala.
1. Ngwa ED-HMI2002-070C amalitela nke ọma ma jikọọ na netwọk. 2. Mezue iwu ndị a n'usoro na pane iwu ka ịgbakwunye edatec apt
isi iyi.
sh curl -sS https://apt.edatec.cn/pubkey.gpg | sudo apt-key tinye echo "deb https://apt.edatec.cn/raspbian stable main" | sudo tee /etc/apt/sources.list.d/edatec.list sudo apt update
NDỤMỌDỤ Ọ bụrụ na idetuo iwu ahụ ozugbo ma enwere nkwụsị ahịrị mgbe ị na-ebufe, biko hichapụ nkwụsịtụ ahịrị ma tinye oghere n'ebe ndị ahụ.
3. Mezue iwu a ka ịwụnye ngwugwu ngwa ngwa.
Email: sales@edatec.cn / support@edatec.cn WebEbe: www.edatec.cn
|
Ekwentị: +86-15921483028(China) | +86-18217351262(Office)
sudo dabara adaba -y ed-hmi2002-070c-firmware ed-linux-image-6.6.31-v8
ED-HMI2002-070C
sh
4. Malitegharịa ekwentị ahụ mgbe echichi zuru ezu.
sh sudo reboot
5. Ọ bụrụ na ihuenyo ka na-adịghị arụ ọrụ mgbe malitegharịa, mebie iwu na-esonụ iji lelee ma firmware ngwugwu e ọma arụnyere.
sh dpkg -l | grep ed-
Nsonaazụ dị na foto dị n'okpuru na-egosi na arụnyere ngwungwu firmware nke ọma.
NDỤMỌDỤ
Ọ bụrụ na ị tinyela ngwungwu firmware na-ezighi ezi, ị nwere ike ime sudo apt-get -purge remove ngwugwu ka ihichapụ ya, ebe "ngwugwu" bụ aha ngwugwu.
Email: sales@edatec.cn / support@edatec.cn WebEbe: www.edatec.cn
|
Ekwentị: +86-15921483028(China) | +86-18217351262(Office)
Akwụkwọ / akụrụngwa
 |
EDA Teknụzụ ED-HMI2002-070C arụ ọrụ akpaaka na njikwa [pdf] Akwụkwọ ntuziaka onye ọrụ ED-HMI2002-070C, ED-HMI2002-070C Industrial Automation na Control, ED-HMI2002-070C, Industrial Automation and Control, Automation and Control, Control |