DVP-SX2
Mpempe akwụkwọ ntuziaka
DVP-SX2 Ndị njikwa mgbagha nwere ike ime mmemme
Daalụ maka ịhọrọ Delta DVP-SX2. DVP-SX2 bụ 20-point (8DI + 6 DO + 4AI + 2AO) PLC MPU, na-enye ntụziaka dị iche iche ma nwee ebe nchekwa mmemme usoro 16k, nwee ike jikọọ na ụdị ndọtị Slim niile, gụnyere ntinye / mmepụta dijitalụ (max. 480 ntinye / mmepụta ihe ndọtị), modul analog (A / D, D / A mgbanwe na nkeji okpomọkụ) na ụdị ọ bụla nke ọhụrụ elu-ọsọ mgbatị modul. Nsonaazụ pulse nke 2-otu dị elu (100kHz) yana otu ntuziaka interpolation 2-axis ọhụrụ.
mejuo ụdị ngwa niile. DVP-SX2 dị obere na nha, enwere ike itinye ya ngwa ngwa.
Ndị ọrụ agaghị etinye batrị ọ bụla na usoro DVP-SX2 PLC. A na-echekwa mmemme PLC na data ndị a kpọchiri akpọchi na ebe nchekwa ọkụ dị elu.
DVP-SX2 bụ ngwaọrụ OPEN-TYPE. Ekwesịrị itinye ya na kọbọd njikwa na-enweghị uzuzu ikuku, iru mmiri, ujo eletrik na ịma jijiji. Iji gbochie ndị ọrụ anaghị arụ ọrụ DVP-SX2, ma ọ bụ gbochie ihe mberede imebi DVP-SX2, ụlọ ọrụ njikwa nke etinyere DVP-SX2 kwesịrị ịbụ ihe nchekwa. Maka exampLe, ụlọ ọrụ njikwa nke etinyere DVP-SX2 nwere ike iji ngwa ma ọ bụ igodo pụrụ iche mepee ya.
Ejikọla ike AC na ọdụ I/O ọ bụla, ma ọ bụghị nnukwu mmebi nwere ike ime. Biko lelee wiwi niile ọzọ tupu agbado DVP-SX2. Mgbe DVP-SX2 kwụsịrị, emetụla ọnụ ọnụ ọ bụla n'otu nkeji. Gbaa mbọ hụ na ọnụ ala 
na DVP-SX2 gbadoro ụkwụ n'ụzọ ziri ezi iji gbochie nnyonye anya electromagnetic.
Ngwaahịa Profile
Nkọwapụta ọkụ eletrik
| Ihe nlereanya | DVP20SX211R | DVP20SX211T | DVP20SX211S |
| Ịnye ọkụ voltage | 24VDC (-15% ~ 20%) (na counter-njikọ nchebe na polarity nke DC ntinye ike) DVPPS01 (PS02): ntinye 100-240VAC, mmepụta 24VDC/1A (PS02: 2A) | ||
| Inrush ugbu a | Oke. 7.5A @ 24VDC | ||
| Ike fuse | 2.5A/30VDC, Poly mgba ọkụ | ||
| Oriri ike | 4.7W | 4W | 4W |
| Nguzogide mkpuchi | > 5MΩ (I/O niile na-aga n'ala: 500VDC) | ||
| Mgbochi mkpọtụ | ESD (IEC 61131-2, IEC 61000-4-2): 8kV Ikuku ikuku EFT (IEC 61131-2, IEC 61000-4-4): Ahịrị ike: 2kV, Digital I/O: 1kV, Analog & Communication I/ O: 1kV RS (IEC 61131-2, IEC 61000-4-3): 26MHz ~ 1GHz, 10V/m Surge (IEC 61131-2, IEC 61000-4-5): Igwe ọkụ DC: ọnọdụ dị iche ± 0.5 kV analọg I / O, RS-232, USB (ọchichi): Ọnọdụ nkịtị ± 1 kV dijitalụ I / O, RS-485 (enweghị mkpuchi): Ọnọdụ nkịtị ± 1 kV |
||
| Nda ala | The dayameta nke grounding waya enweghị ike ịbụ obere karịa waya dayameta nke ọnụ 24V na 0V (All DVP nkeji kwesịrị n'ala ozugbo na ala osisi). | ||
| Ọrụ / nchekwa | Ọrụ: 0°C ~ 55°C (okpomọkụ.), 50 ~ 95% (iru mmiri), Mmetọ ogo2 Nchekwa: -25°C ~ 70°C (okpomọkụ.), 5 ~ 95% (iru mmiri) | ||
| Vibration / ujo eguzogide | Ụkpụrụ mba ụwa: IEC61131-2, IEC 68-2-6 (TEST Fc)/IEC61131-2 & IEC 68-2-27 (TEST Ea) | ||
| Ibu (g) | 243g | 224g | 227g |
| Nkọwa. Ihe | Ebe ntinye | |||
| 24VDC (-15% ~ 20%) otu ntinye ọdụ ụgbọ mmiri nkịtị | ||||
| Ntinye Mba. | X0, X2 | X1, X3 | X4 ~ X7 | |
| Ụdị ntinye | DC (SINK ma ọ bụ isi mmalite) | |||
| Ntinye ugbu a (± 10%) | 24VDC, 5mA | |||
| Ntinye mgbochi | 4.7K Oho | |||
| Ọkwa omume | Gbanyụọ ⭢Na | > 15VDC | ||
| Gbanyụọ ⭢ Gbanyụọ | <5VDC | |||
| Oge nzaghachi | Gbanyụọ ⭢Na | <2.5μs | <10μs | <20 anyị |
| Gbanyụọ ⭢ Gbanyụọ | <5μs | <20μs | <50 anyị | |
| Oge nzacha | Enwere ike idozi n'ime 0 ~ 20ms site na D1020 (Ihe ndabara: 10ms) | |||
| Nkọwa. | Ebe mmepụta | ||||
| Ihe | Ntugharị | Transistor | |||
| Mpụta Mba. | Y0 ~ Y5 | Y0, Y2 | Y1, Y3 | Y4, Y5 | |
| Oke. ugboro ugboro | 1Hz | 100kHz | 10kHz | 1kHz | |
| Vol na -arụ ọrụtage | 250VAC, <30VDC | 5 ~ 30VDC #1 | |||
| Oke. ibu | Nguzogide | 1.5A/1 isi (5A/COM) | SX211T: 0.5A/1 isi (3A/ZP) SX211S: 0.3A/1 isi (1.8A/UP) | ||
| Odighi uche | #2 | 15W (30VDC) | |||
| Lamp | 20WDC/100WAC | 2.5W (30VDC) | |||
| Oge nzaghachi | Gbanyụọ ⭢Na | Ihe ruru. 10 ms | 2μs | 20μs | 100μs |
| Gbanyụọ ⭢ Gbanyụọ | 3μs | 30μs | 100μs | ||
#1: DVP20SX211T: UP, ZP ga-arụ ọrụ na mpụga inyeaka ike ọkọnọ 24VDC (-15% ~ +20%), gosiri oriri ihe ruru. 3mA/point.
DVP20SX211S: elu, ZP ga-arụ ọrụ na mpụga inyeaka ike ọkọnọ 5 ~ 30VDC, gosiri oriri ihe ruru. 5mA / ntụpọ.
Nkọwapụta A/D na D/A
| Ihe | Ntinye Analog (A/D) | Mmepụta Analog (D/A) | ||||
| Voltage | Ugbu a | Voltage | Ugbu a | |||
| Analog I/O nso | ± 10V | ± 20mA | 4 ~ 20mA#1 | ± 10V | 0 ~ 20mA | 4 ~ 20mA#1 |
| Oke ntụgharị dijitalụ | ±2,000 | ±2,000 | 0 ~ +2,000 | ±2,000 | 0 ~ +4,000 | 0 ~ +4,000 |
| Mkpebi #2 | 12-bit | |||||
| Ntinye mgbochi | > 1MΩ | 250Ω | - | |||
| Ndigide bu ihe mgbochi | - | ≥ 5KΩ | ≤ 500Ω | |||
| N'ozuzu izi ezi | Izi ezi nke na-abụghị linear: ± 1% nke ọnụ ọgụgụ zuru oke n'ime oke ọrụ PLC ọrụ okpomọkụ Ngbanwe kachasị: ± 1% nke ọnụ ọgụgụ zuru ezu na 20mA na + 10V | |||||
| Oge nzaghachi | 2ms (nke edobere na D1118) #3 | 2ms #4 | ||||
| Oke ntinye zuru oke | ± 15V | ± 32mA | - | |||
| Ụdị data dijitalụ | Ihe mmeju nke 2 nke 16-bit, 12 dị mkpa | |||||
| Nkezi ọrụ | Enyere (nke edobere na D1062) #5 | - | ||||
| Usoro nkewapụ iche | Enweghị ikewapụ n'etiti sekit dijitalụ na sekit analọg | |||||
| Nchedo | Voltage mmepụta nwere nchebe sekit dị mkpụmkpụ, mana ogologo oge nke obere sekit nwere ike ime ka mmebi waya dị n'ime na oghere nke mmepụta ugbu a. | |||||
#1: Biko rụtụ aka na nkọwa zuru ezu nke D1115.
#2: Usoro mkpebi
| Ntinye Analog (A/D) | Mmepụta Analog (D/A) | ||
| Voltage | Ugbu a | Voltage | Ugbu a |
| (5mV = 20V) 4000 |
(10μΑ = 40mA) 4000 |
(5mV = 20V) 4000 |
(5μΑ = 20mA) 4000 |
#3: Mgbe oge nyocha dị ogologo karịa 2ms ma ọ bụ uru setịpụrụ, ntọala ahụ ga-agbaso oge nyocha.
#4: Mgbe oge nyocha dị ogologo karịa 2ms, ntọala ga-esochi oge nyocha.
#5: Mgbe sampling range bụ "1", uru ugbu a ga-agụ.
Nhazi I/O
| Nlereanya | Ntinye | Mpụta | Nhazi I/O | ||||
| Ntụtu aka | Ụdị | Ntụtu aka | Ụdị | Ntugharị | NPN | PNP | |
| 20SX211R | 8 | DC (Sink ma ọ bụ isi iyi) | 6 | Ntugharị |  |
 |
 |
| 20SX211T | NPN Transistor | ||||||
| 20SX211S | PNP Transistor | ||||||
| SX2-R/T/S | 4 | Ntinye Analog | 2 | Mmepụta analog | |||
Dimension & nwụnye
Biko tinye PLC n'ime mkpuchi nwere ohere zuru oke gburugburu ya iji kwe ka ikpochapụ okpomọkụ, dị ka egosiri na [Foto 5].
- Ntinye aka ozugbo: Biko jiri m4 skru dị ka akụkụ ngwaahịa ahụ siri dị.
- DIN Rail Mounting: Mgbe ị na-arịgo PLC na 35mm DIN rail, jide n'aka na ị ga-eji ihe ejigide ihe iji kwụsị mmegharị ọ bụla n'akụkụ PLC ma belata ohere nke wires na-atọpụ. Mpempe akwụkwọ ndowe dị na ala PLC. Iji chekwaa PLC na
Ụgbọ okporo ígwè DIN, wetuo ihe nkiri ahụ, tinye ya n'ụgbọ okporo ígwè ma jiri nwayọọ kwalie ya elu. Iji wepu PLC, were screwdriver dị larịị wetuo clip ahụ n'ala ma jiri nwayọ wepụ PLC na ụgbọ okporo ígwè DIN.
Wiring
- Jiri 26-16AWG (0.4 ~ 1.2mm) otu ma ọ bụ ọtụtụ isi waya na ọdụ wiring I/O. Hụ ọnụ ọgụgụ dị n'akụkụ aka nri maka nkọwapụta ya. Ekwesịrị imechi skru ọnụ PLC ka ọ bụrụ 2.0kg-cm (1.77 in-lbs) ma biko jiri naanị onye na-eduzi ọla kọpa 60/75ºC.
- Ekwela waya ọnụ ọnụ efu ma tinye eriri mgbaàmà I/O n'otu sekit wiring.
- Atụbala obere ihe ntụzi ọla n'ime PLC mgbe ị na-atụgharị na wiring. Yipụ ihe mmado dị na oghere mkpofu ọkụ maka igbochi ihe ndị ọzọ ịbata na ya, iji hụ na mwepu ọkụ nke PLC nkịtị.
Wiring nchekwa
Ebe DVP-SX2 bụ naanị dakọtara na DC ike ọkọnọ, Delta ike ọkọnọ modul (DVPPS01/DVPPS02) bụ adabara ike onunu maka DVP-SX2. A na-atụ aro ka ndị ọrụ tinye sekit nchedo na ọdụ ọkụ ọkụ iji chekwaa DVPPS01 ma ọ bụ DVPPS02. Lee foto dị n'okpuru.
- Ike ọkọnọ AC: 100 ~ 240VAC, 50/60Hz
- Njiji
- Nkwụsị mberede: Bọtịnụ a na-ebipụ ọkụ sistemu mgbe ihe mberede mberede mere.
- Ngosipụta ike
- AC ike ọkọnọ ibu
- Igwe nchekwa sekit na-enye ọkụ (2A)
- DVPPS01/DVPPS02
- Mmepụta ọkụ ọkụ DC: 24VDC, 500mA
- DVP-PLC (Ngalaba nhazi)
- Digital I/O modul
Ịnye ọkụ
Ntinye ike nke usoro DVP-SX2 bụ DC. Mgbe ị na-arụ ọrụ usoro DVP-SX2, biko rịba ama isi ihe ndị a:
- Ejikọtara ike ahụ na njedebe abụọ, 24VDC na 0V, na oke ike bụ 20.4 ~ 28.8VDC. Ọ bụrụ na ike voltage bụ ihe na-erughị 20.4VDC, PLC ga-akwụsị na-agba ọsọ, niile mmepụta ga-aga "Off" na ERROR egosi ga-flash na-aga n'ihu.
- Nkwụsị ike nke na-erughị 10 ms agaghị emetụta ọrụ PLC. Otú ọ dị, oge nkwụsị ike nke dị ogologo ma ọ bụ nkwụsị nke ike voltage ga-akwụsị ọrụ nke PLC na mmepụta niile ga-apụ. Mgbe ike laghachiri na ọkwa nkịtị, PLC ga-amaliteghachi ọrụ ozugbo. (Ekwesịrị ịkpachara anya na relays inyeaka ndị a na-etinye na ndekọ n'ime PLC mgbe ị na-eme mmemme).
Ntinye Point Wiring
Enwere ụdị ntinye DC 2, SINK na SOURCE. (Lee example n'okpuru. Maka nhazi nkọwa zuru ezu, biko rụtụ aka na nkọwapụta nke ụdị ọ bụla.)
Wiring Point mmepụta
- Usoro DVP-SX2 nwere modul mmepụta atọ, relay na transistor (NPN/PNP). Kpachara anya maka njikọ nke ọnụ ọnụ ọnụ mgbe ị na-ekesa ọnụ ahịa mmepụta.
- Ọnụ ihe mmepụta, Y0, Y1, na Y2, nke ụdị relay na-eji ọdụ ụgbọ mmiri C0; Y3, Y4, na Y5 na-eji ọdụ ụgbọ mmiri nkịtị C1; dị ka e gosiri na [Foto dị na peeji nke 9]. Mgbe etinyere ihe nrụpụta, ihe ngosi ha kwekọrọ na panel ihu ga-agbanye.
- Ejikọrọ ọnụ ọnụ Y0 ~ Y5 nke ụdị transistor (NPN) na ọnụ ọnụ UP na ZP. Lee [Foto 10a]. Ọnụ ahịa mmepụta Y0 ~ Y5 na ụdị transistor (PNP) jikọtara ọnụ na ọnụ ọnụ UP na ZP. Lee [Foto 10b].
- Sekit kewapụrụ: A na-eji njikọ anya anya kewapụ akara n'etiti sekit n'ime PLC na modul ntinye.
Mgbasa ozi sekit mmepụta ọsọ (R).
- Ọkụ ọkụ DC
- Nkwụsị mberede: Na-eji mgba ọkụ mpụga
- Fuse: Na-eji 5 ~ 10A fuse na njedebe nke kọntaktị mmepụta iji chebe sekit mmepụta
- Voltage suppressor (SB360 3A 60V): Ịgbatị ogologo ndụ kọntaktị.
1. Diode suppression nke DC ibu: A na-eji ya mgbe ọ dị obere ike (Njirimara 12a)
2. Diode + Zener nkwụsị nke ibu DC: A na-eji ya mgbe ọ nwere ike buru ibu na ịgbanyụ / gbanyụọ ugboro ugboro (Fig 12b) - Ọkụ na-enwu ọkụ (ibu na-eguzogide)
- Ike ọkọnọ AC
- Nsonaazụ pụrụiche nke aka ya: Maka example, Y3 na Y4 na-achịkwa na-aga n'ihu na-agba ọsọ ma na-atụgharị na-agba ọsọ nke moto ahụ, na-emepụta ihe mgbochi maka sekit dị n'èzí, yana mmemme ime PLC, iji hụ na nchebe dị mma ma ọ bụrụ na e nwere njehie ọ bụla a na-atụghị anya ya.
- Absorber: Iji belata nnyonye anya na ibu AC (Foto 13)
Transistor (T) eriri sekit mmepụta
- Ọkụ ọkụ DC
- Nkwụsị mberede
- Igwe nchekwa sekit
- TVS diode: Na-agbatị ogologo ndụ kọntaktị maka ndụ ọrụ ka ukwuu.
1. Mbelata diode: A na-eji ya mgbe ọ dị obere (Njirimara 15a)
2. Diode + Zener suppression: A na-eji ya mgbe ọ nwere ike buru ibu yana ịgbanwuo / gbanyụọ ugboro ugboro (Foto 15b) - Nsonaazụ pụrụiche nke aka ya: Maka example, Y3 na Y4 na-achịkwa na-aga n'ihu na-agba ọsọ ma na-atụgharị na-agba ọsọ nke moto ahụ, na-emepụta ihe mgbochi maka sekit dị n'èzí, yana mmemme ime PLC, iji hụ na nchebe dị mma ma ọ bụrụ na e nwere njehie ọ bụla a na-atụghị anya ya.
A/D na D/A mpụga Wiring
- Nna ukwu ọnụ
- Ọnụ ohu
- Nguzogide nkwụsị
- Igwe mkpuchi mkpuchi
Mara:
- A na-atụ aro ka ejikọta ndị na-eguzogide njedebe na nna ukwu na ohu ikpeazụ nwere uru resistor nke 120Ω.
- Iji hụ na nzikọrịta ozi dị mma, biko tinye eriri abụọ gbagọrọ agbagọ (20AWG) maka wiring.
- Mgbe voltage dobe na-apụta n'etiti nrụtụ aka n'ime ala nke sistemu abụọ, jikọọ sistemụ na akara ngosi Ground (SG) maka inweta ikike nha anya n'etiti sistemụ ka enwere ike nweta nkwurịta okwu kwụsiri ike.
Nkenkenke nke RTC (nke abụọ/ọnwa)
| Okpomọkụ(°C/°F) | 0/32 | 25/77 | 55/131 |
| Njehie kacha (nke abụọ) | -117 | 52 | -132 |
Ogologo oge nke ejigidere RTC: Otu izu (naanị ụdị 2.00 na karịa ka a na-akwado.)
Akwụkwọ / akụrụngwa
 |
DELTA DVP-SX2 Ndị njikwa mgbagha nwere ike ime [pdf] Ntuziaka DVP-SX2, DVP-SX2 Mmemme Logic Controllers, Programmable Logic Controllers, Logic Controllers, Controllers |