Beijer GT-1428 Digital Input Output Module
8 digital input (sink), 8 digital output (source), 24 VDC, 0.5 A, diagnostic, cage clamp, 18 pt mbughari ọnụ
NJ akwụkwọ 137670
2025-02-20
Nwebiisinka © 2025 Beijer Electronics AB. Ikike niile echekwabara. Ozi dị na akwụkwọ a nwere ike ịgbanwe n'enweghị ọkwa ma nye ya dị ka ọ dị n'oge mbipụta. Beijer Electronics AB nwere ikike ịgbanwe ozi ọ bụla na-emeliteghị akwụkwọ a. Beijer Electronics AB anaghị ewere ọrụ maka mperi ọ bụla nwere ike ịpụta na akwụkwọ a. All examples na akwụkwọ a bụ naanị iji kwalite nghọta nke ọrụ na njikwa akụrụngwa. Beijer Electronics AB enweghị ike iburu ụgwọ ọ bụla ma ọ bụrụ na ndị a bụbuampA na-eji les eme ihe n'ezie ngwa. N'ime view nke ngwa dị iche iche maka ngwa ngwanrọ a, ndị ọrụ ga-enwerịrị ihe ọmụma zuru oke n'onwe ha iji hụ na ejiri ya nke ọma na ngwa ha akọwapụtara. Ndị na-ahụ maka ngwa na akụrụngwa ga-ahụrịrị na ngwa ọ bụla dabara na ihe niile achọrọ, ụkpụrụ na iwu gbasara nhazi na nchekwa. Beijer Electronics AB agaghị anabata ụgwọ ọ bụla maka mmebi ọ bụla mebiri n'oge nrụnye ma ọ bụ iji akụrụngwa a kpọtụrụ aha n'akwụkwọ a. Beijer Electronics AB amachibidoro mgbanwe, mgbanwe ma ọ bụ ntughari nke akụrụngwa niile.
Isi ụlọ ọrụ
Ụlọ ọrụ Beijer Electronics AB (publ)
Igbe 426
201 24 Malmö, Sweden
www.beijerelectronics.com / +46 40 358600
Banyere akwụkwọ ntuziaka a
This manual contains information on the software and hardware features of the Beijer Electronics GT-1428 Digital Input/Output Module. It provides in-depth specifications, guidance on installation, setup, and usage of the product.
Akara ndị ejiri n'akwụkwọ ntuziaka a
Edemede a gụnyere ịdọ aka ná ntị, ịkpachara anya, ndetu na akara ngosi dị mkpa ebe kwesịrị ekwesị, iji rụtụ aka nchekwa metụtara ma ọ bụ ozi ndị ọzọ dị mkpa. Ekwesịrị ịkọwapụta akara ndị kwekọrọ ka ndị a:
Ịdọ aka ná ntị
Akara ngosi ịdọ aka ná ntị na-egosi ọnọdụ nwere ike ịdị ize ndụ nke, ọ bụrụ na ewepụghị ya, nwere ike bute ọnwụ ma ọ bụ mmerụ ahụ dị ukwuu yana mmebi dị ukwuu na ngwaahịa ahụ.
kpachara anya
The Caution icon indicates a potentially hazardous situation that, if not avoided, could result in minor or moderate injury and moderate damage to the product.
IHE
Akara ndetu na-eme ka onye na-agụ mara eziokwu na ọnọdụ dị mkpa.
IHE dị mkpa
Akara ngosi dị mkpa na-eme ka ozi dị mkpa pụta ìhè.
Nchekwa
- Tupu iji ngwaahịa a, biko jiri nlezianya gụọ akwụkwọ ntuziaka a na akwụkwọ ntuziaka ndị ọzọ dị mkpa. Lezienụ anya na ntuziaka nchekwa!
- Ọ dịghị ihe ọ bụla Beijer Electronics ga-ahụ maka ma ọ bụ kwụọ ụgwọ maka mmebi sitere na iji ngwaahịa a.
- Foto ndị a, examples na eserese dị n'akwụkwọ ntuziaka a ka etinyere maka ebumnuche atụ. N'ihi ọtụtụ mgbanwe na ihe achọrọ metụtara nrụnye ọ bụla, Beijer Electronics enweghị ike ibu ọrụ ma ọ bụ ụgwọ maka iji ya eme ihe dabere na mbụ.amples na eserese.
Asambodo ngwaahịa
Ngwaahịa ahụ nwere asambodo ndị a.
General Safety chọrọ
Ịdọ aka ná ntị
- Do not assemble the products and wires with power connected to the system. Doing so causes an “arc flash”, which can result in unexpected, dangerous events
(burns, fire, flying objects, blast pressure, sound blast, heat). - Emetụkwala ngọngọ ọnụ ma ọ bụ modul IO mgbe sistemụ na-arụ ọrụ. Ime nke a nwere ike ibute ujo eletrik, sekit dị mkpụmkpụ ma ọ bụ arụghị ọrụ nke ngwaọrụ ahụ.
- Never let external metallic objects touch the product when the system is running. Doing so may cause an electric shock, a short circuit or malfunction of the device.
- Edokwala ngwaahịa a n'akụkụ ihe na-ere ọkụ. Ime otú ahụ nwere ike ịkpata ọkụ.
- Ọrụ wiwi niile kwesịrị ịbụ onye injinia eletrik ga-arụ.
- Mgbe ị na-ejikwa modul, hụ na mmadụ niile, ebe ọrụ, na nkwakọ ngwaahịa nwere ezigbo ala. Zere imetụ ihe ndị na-eduzi emetụ aka, modul nwere ihe eletrọnịkị nke enwere ike ibibi site na mwepu electrostatic.
kpachara anya
- Ejila ngwaahịa a na gburugburu ebe okpomọkụ karịrị 60 ℃. Zere itinye ngwaahịa ahụ na ìhè anyanwụ.
- Ejila ngwaahịa a na gburugburu nwere iru mmiri karịrị 90%.
- Jiri ngwaahịa a mgbe niile na gburugburu nwere ogo mmetọ 1 ma ọ bụ 2.
- Jiri eriri ọkọlọtọ maka waya.
Banyere Sistemụ usoro G
Sistemu agwụlaview
- Modul ihe nkwụnye netwọkụ – The network adapter module forms the link between the field bus and the field devices with the expansion modules. The connection to different field bus systems can be established by each of the corresponding network adapter modules, e.g., for MODBUS TCP, Ethernet IP, EtherCAT, PROFINET, CC-Link IE Field, PROFIBUS, CANopen, DeviceNet, CC-Link, MODBUS/Serial etc.
- Module Mgbasawanye – Ụdị modul mgbasawanye: Digital IO, Analog IO, na modul pụrụ iche.
- Izi ozi - Usoro na-eji ụdị ozi abụọ: ozi ọrụ na ozi IO.
Usoro nhazi data IO
An expansion module has three types of data: IO data, configuration parameters, and memory registers. The data exchange between the network adapter and the expansion modules is made via IO process image data by internal protocol.
Ọsọ data n'etiti nkwụnye netwọkụ (oghere 63) na modul mgbasawanye
The input and output image data depend on the slot position and the data type of the expansion slot. The ordering of the input and output process image data is based on the expansion slot position. Calculations for this arrangement are included in the manuals for the network adapter and programmable IO modules.
Data paramita bara uru dabere na modul ndị a na-eji. Maka example, modul analog nwere ntọala nke 0-20 mA ma ọ bụ 4-20 mA, na modul okpomọkụ nwere ntọala dịka PT100, PT200, na PT500. Akwụkwọ maka modul ọ bụla na-enye nkọwa nke data paramita.
Nkọwapụta
Nkọwapụta gburugburu ebe obibi
| Ọnọdụ okpomọkụ na-arụ ọrụ | -20°C – 60°C |
| UL okpomọkụ | -20°C – 60°C |
| Ọnọdụ nchekwa | -40°C – 85°C |
| Iru mmiri dị ala | 5% - 90% na-abụghị condensing |
| Ịkwanye | DIN ụgbọ okporo ígwè |
| Shock arụ ọrụ | IEC 60068-2-27 (15G) |
| Nguzogide ịma jijiji | IEC 60068-2-6 (4 g) |
| Mgbapụta ụlọ ọrụ | EN 61000-6-4: 2019 |
| Mgbochi ụlọ ọrụ | EN 61000-6-2: 2019 |
| Ọnọdụ nwụnye | Vetikal na kehoraizin |
| Asambodo ngwaahịa | CE, FCC, UL, cUL |
Nkọwapụta izugbe
| Mgbasa ike | Oke. 55 mA @ 5 VDC |
| Nnọpụ iche | I/O maka mgbagha: ikewapụ fotocoupler |
| UL ubi ike | Tụkwasịnụ voltage: 24 VDC ọnụ ọgụgụ, klas 2 |
| Ike ubi | Tụkwasịnụ voltage: 24 VDC ọnụ ọgụgụ Voltage nso: 15-30 VDC
Mgbasa ike: 40 mA @ 24 VDC |
| Wiring | I/O cable max. 0.75 mm2 (AWG 18) |
| Ibu | 63 g |
| Nha modul | 12 mm x 109 mm x 70 mm |
Akụkụ
Akụkụ modul (mm)
Nkọwa ntinye
| Ntinye kwa modul | 8 isi sink ụdị |
| Ihe ngosi | Ọkwa ntinye akwụkwọ ndụ akwụkwọ ndụ 8 |
| Na steeti voltage | 24 VDC ọnụ ọgụgụ
15 - 30 VDC @ 60 ℃ |
| Ọnọdụ ugbu a na steeti | 2.25 MA @ 24 VDC
3 MA @ 30 VDC |
| Off-steeti voltage | 8 VDC @ 25 ℃ |
| Ntinye nrịbama oge | Gbanyụọ ka GBANYE: Max. 0.3 ms
Gbanyụọ ka ọ bụrụ: Max. 0.3 ms |
| Ntinye ntinye | Enwere ike idozi, ruo 10 ms |
| Mgbochi ntinye aha aha | 10.2K Ω nkịtị |
Nkọwapụta mmepụta
| Mpụta kwa modul | 8 isi isi iyi ụdị |
| Ihe ngosi | Ọkwa ntinye akwụkwọ ndụ akwụkwọ ndụ 8 |
| Mmepụta voltage oke | 24 VDC ọnụ ọgụgụ
15 - 30 VDC @ 60 ℃ |
| Na steeti voltage dobe | 0.3 VDC @ 25 ℃
0.6 VDC @ 60 ℃ |
| Na steeti min. ugbu a | Min. 1mA |
| Mwepu na-adịghị na steeti ugbu a | Oke. 10 uA |
| Oge mgbaama mmepụta | Gbanyụọ ka GBANYE: Max. 0.1 ms
Gbanyụọ ka ọ bụrụ: Max. 0.35 ms |
| Wepụta ọkwa dị ugbu a | Oke. 0.5 A kwa ọwa / Max. 4 A kwa otu |
| Nchedo | Over current limit: 2.2 A @ 25 °C each channel Thermal shutdown: 175 °C
Nchedo obere okirikiri |
Eserese waya
| Ntụtụ ọ dịghị. | Nkọwa mgbaàmà |
| 0 | Ọwa ntinye 0 |
| 1 | Ọwa mmepụta 0 |
| 2 | Ọwa ntinye 1 |
| 3 | Ọwa mmepụta 1 |
| 4 | Ọwa ntinye 2 |
| 5 | Ọwa mmepụta 2 |
| 6 | Ọwa ntinye 3 |
| 7 | Ọwa mmepụta 3 |
| 8 | Ọwa ntinye 4 |
| 9 | Ọwa mmepụta 4 |
| 10 | Ọwa ntinye 5 |
| 11 | Ọwa mmepụta 5 |
| 12 | Ọwa ntinye 6 |
| 13 | Ọwa mmepụta 6 |
| 14 | Ọwa ntinye 7 |
| 15 | Ọwa mmepụta 7 |
| 16 | Ndị nkịtị (ike ubi 0V) |
| 17 | Ndị nkịtị (ike ubi 24V) |
Ihe ngosi LED
| LED mba. | Ọrụ / nkọwa LED | Agba agba |
| 0 (left side) | INPUT ọwa 0 | Akwụkwọ ndụ akwụkwọ ndụ |
| 1 | INPUT ọwa 1 | Akwụkwọ ndụ akwụkwọ ndụ |
| 2 | INPUT ọwa 2 | Akwụkwọ ndụ akwụkwọ ndụ |
| 3 | INPUT ọwa 3 | Akwụkwọ ndụ akwụkwọ ndụ |
| 4 | INPUT ọwa 4 | Akwụkwọ ndụ akwụkwọ ndụ |
| 5 | INPUT ọwa 5 | Akwụkwọ ndụ akwụkwọ ndụ |
| 6 | INPUT ọwa 6 | Akwụkwọ ndụ akwụkwọ ndụ |
| 7 | INPUT ọwa 7 | Akwụkwọ ndụ akwụkwọ ndụ |
| 0 (right side) | UTPUT ọwa 0 | Akwụkwọ ndụ akwụkwọ ndụ |
| 1 | UTPUT ọwa 1 | Akwụkwọ ndụ akwụkwọ ndụ |
| 2 | UTPUT ọwa 2 | Akwụkwọ ndụ akwụkwọ ndụ |
| 3 | UTPUT ọwa 3 | Akwụkwọ ndụ akwụkwọ ndụ |
| 4 | UTPUT ọwa 4 | Akwụkwọ ndụ akwụkwọ ndụ |
| 5 | UTPUT ọwa 5 | Akwụkwọ ndụ akwụkwọ ndụ |
| 6 | UTPUT ọwa 6 | Akwụkwọ ndụ akwụkwọ ndụ |
| 7 | UTPUT ọwa 7 | Akwụkwọ ndụ akwụkwọ ndụ |
Ọnọdụ ọwa LED
LED no. 0-7 (left side)
| Ọnọdụ | Ikanam | Ngosipụta |
| Enweghị mgbama | Gbanyụọ | Arụ ọrụ nkịtị |
| Na mgbama | Akwụkwọ ndụ akwụkwọ ndụ | Arụ ọrụ nkịtị |
LED no. 0-7 (right side)
| Ọnọdụ | Ikanam | Ngosipụta |
| Enweghị mgbama | Gbanyụọ | Arụ ọrụ nkịtị |
| Na mgbama | Akwụkwọ ndụ akwụkwọ ndụ | Arụ ọrụ nkịtị |
| Mmejọ ọwa | Flash | Short to GND Over current
N'elu okpomọkụ |
Ịdepụta data n'ime tebụl onyonyo
Ntinye data modul
| D7 | D6 | D5 | D4 | D3 | D2 | D1 | D0 |
| D15 | D14 | D13 | D12 | D11 | D10 | D9 | D8 |
Tinye uru onyonyo
| Bit mba. | Bit 7 | Bit 6 | Bit 5 | Bit 4 | Bit 3 | Bit 2 | Bit 1 | Bit 0 |
| Byte 0 | D7 | D6 | D5 | D4 | D3 | D2 | D1 | D0 |
| Byte 1 | D15 | D14 | D13 | D12 | D11 | D10 | D9 | D8 |
Ọnụ ego onyonyo wepụta
| Bit mba. | Bit 7 | Bit 6 | Bit 5 | Bit 4 | Bit 3 | Bit 2 | Bit 1 | Bit 0 |
| Byte 0 | D7 | D6 | D5 | D4 | D3 | D2 | D1 | D0 |
Output module data
| D7 | D6 | D5 | D4 | D3 | D2 | D1 | D0 |
Data Parameter
Ogologo oke oke: 4 bytes
| Bit mba. | Bit 7 | Bit 6 | Bit 5 | Bit 4 | Bit 3 | Bit 2 | Bit 1 | Bit 0 |
| Byte 0 | Fault action (ch0 – ch7) 0: Fault value
1: Hold last state |
|||||||
| Byte 1 | Fault value (ch0 – ch7) 0: Off
1: na |
|||||||
| Byte 2 | Uru nzacha ntinye: 0 – 10 (otu: ms) | |||||||
| Byte 3 | Echekwara | |||||||
Ntọala ngwaike
kpachara anya
- Na-agụ isiakwụkwọ a mgbe niile tupu ịwụnye modul!
- Elu dị ọkụ! Elu ụlọ ahụ nwere ike ịdị ọkụ n'oge ọrụ. Ọ bụrụ na a na-eji ngwaọrụ ahụ na okpomọkụ dị elu, hapụ ka ngwaọrụ ahụ daa jụụ tupu ya emetụ ya aka.
- Ịrụ ọrụ na ngwaọrụ ike nwere ike imebi akụrụngwa! Gbanyụọ ọkụ mgbe niile tupu ịrụ ọrụ na ngwaọrụ.
Achọrọ oghere
The following drawings show the space requirements when installing the G-series modules. The spacing creates space for ventilation and prevents conducted electromagnetic interference from influencing the operation. The installation position is valid vertically and horizontally. The drawings are illustrative and may be out of proportion.
kpachara anya
Ịgbasoghị oghere chọrọ nwere ike bute mmebi ngwaahịa.
Ugwu Module gaa na DIN Rail
Isiakwụkwọ ndị na-esonụ na-akọwa otu esi ebugo modul na okporo ígwè DIN.
kpachara anya
A ghaghị idozi modul ahụ na okporo ígwè DIN na ihe mkpuchi mkpọchi.
Ugwu GL-9XXX ma ọ bụ GT-XXXX Module
Ntuziaka ndị a metụtara ụdị modul ndị a:
- GL-9XXX
- GT-1XXX
- GT-2XXX
- GT-3XXX
- GT-4XXX
- GT-5XXX
- GT-7XXX
Modul GN-9XXX nwere oghere mkpọchi atọ, otu na ala na abụọ n'akụkụ. Maka ntuziaka nwụnye, rụtụ aka na Modul Ugwu GN-9XXX.
Ugwu GN-9XXX Module
Iji bulie ma ọ bụ tụtuo ihe nkwụnye netwọkụ ma ọ bụ modul IO nwere ike ime ya nwere aha ngwaahịa GN-9XXX, maka ex.ampGN-9251 ma ọ bụ GN-9371, lee ntuziaka ndị a:
Ngwongwo ọdụ ụgbọ elu nke mbughari
Iji rịgoro ma ọ bụ tụtuo ngọngọ ọdụ mbughari (RTB), lee ntuziaka n'okpuru.
Jikọọ eriri na ngọngọ njedebe mbughari
Ka ijikọ/ịpụpụ eriri na/site na ngọngọ nkwụsị mbughari (RTB), hụ ntuziaka dị n'okpuru.
Ịdọ aka ná ntị
Jiri ọkọnọ akwadoro mgbe niiletage na ugboro ugboro iji gbochie mmebi nke akụrụngwa ma hụ na arụmọrụ kacha mma.
Ike ubi na ntụtụ data
A na-eme mkparịta ụka n'etiti ihe nkwụnye netwọkụ G-usoro na modul mgbasawanye, yana sistemu / ebe ike ọkọnọ nke modul ụgbọ ala, site na ụgbọ ala ime. Ọ nwere pinni ike Ubi 2 na ntụtụ data 6.
Ịdọ aka ná ntị
Emetụla data na ntụtụ ike ubi aka! Imetụ aka nwere ike ime ka ụda ESD mebie ma mebie ya.
| Ntụtụ ọ dịghị. | Aha | Nkọwa |
| P1 | Sistemụ VCC | Sistemu ọkọnọ voltage (5VDC) |
| P2 | Sistemụ GND | Sistemụ ala |
| P3 | Mbupute akara | Token mmepụta ọdụ ụgbọ mmiri nke processor modul |
| P4 | Serial mmepụta | Ọdụ ụgbọ mmiri ihe nrụpụta nke modul processor |
| P5 | Ntinye usoro | Ọdụ ụgbọ mmiri ntinye nnabata nke modul processor |
| P6 | Echekwara | Edobere maka akara mgbanaka ụzọ |
| P7 | Mpaghara GND | Ala ubi |
| P8 | Mpaghara VCC | Ọkụ ọkọnọ voltage (24VDC) |
Beijer Eletrọnịkị, NJ Dọkịta: 137670
Akwụkwọ / akụrụngwa
 |
Beijer GT-1428 Digital Input Output Module [pdf] Akwụkwọ ntuziaka onye ọrụ GT-1428, GT-1428 Digital Input Output Module, GT-1428, Digital Input Output Module, Input Output Module, Output Module, Module |