Beijer ELECTRONICS GT-3468 Analog Ntinye Module
Nkọwapụta
- Nkọwapụta gburugburu: The module operates within a temperature range of X to Y degrees Celsius and a humidity range of Z% to W%.
- Nkọwa n'ozuzu: Provides details on the general functioning and compatibility of the module.
- Nkọwa ntinye: Details on the analog input capabilities, voltage range, resolution, etc.
Banyere akwụkwọ ntuziaka a
Akwụkwọ ntuziaka a nwere ozi gbasara ngwa ngwa na ngwaike nke Beijer Electronics GT-3468 Analog Input Module. Ọ na-enye nkọwa dị omimi, ntuziaka maka nrụnye, nhazi, na ojiji nke ngwaahịa.
Akara ndị ejiri n'akwụkwọ ntuziaka a
Edemede a gụnyere ịdọ aka ná ntị, ịkpachara anya, ndetu na akara ngosi ndị dị mkpa ebe kwesịrị ekwesị, iji rụtụ aka nchekwa, ma ọ bụ ozi ndị ọzọ dị mkpa. Ekwesịrị ịkọwapụta akara ndị kwekọrọ ka ndị a:
Ịdọ aka ná ntị
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury, and major damage to the product.
kpachara anya
Indicates a potentially hazardous situation which, if not avoided, could result in minor or moderate injury, and moderate damage to the product.
IHE dị mkpa
Highlights key information.
IHE
Points out relevant facts and conditions.
NDỤMỌDỤ
Provides useful, non-essential information to assist you.
Nchekwa
Tupu iji ngwaahịa a, biko jiri nlezianya gụọ akwụkwọ ntuziaka a na akwụkwọ ntuziaka ndị ọzọ dị mkpa. Lezienụ anya na ntuziaka nchekwa!
Ọ dịghị ihe ọ bụla Beijer Electronics ga-ahụ maka ma ọ bụ kwụọ ụgwọ maka mmebi sitere na iji ngwaahịa a.
Foto ndị a, examples na eserese dị n'akwụkwọ ntuziaka a ka etinyere maka ebumnuche atụ. N'ihi ọtụtụ mgbanwe na ihe achọrọ metụtara nrụnye ọ bụla, Beijer Electronics enweghị ike ibu ọrụ ma ọ bụ ụgwọ maka iji ya eme ihe dabere na mbụ.amples na eserese.
Asambodo ngwaahịa
Ngwaahịa ahụ nwere asambodo ngwaahịa ndị a.
General Safety chọrọ
Ịdọ aka ná ntị
- Achịkọtala ngwaahịa na wires na ike ejikọrọ na sistemụ. Ime nke a na-ebute "ọkụ ọkụ", nke nwere ike ịkpata ihe omume dị ize ndụ na-atụghị anya ya (ọkụ, ọkụ, ihe na-efe efe, nrụgide mgbawa, ụda ụda, okpomọkụ).
- Emetụkwala ngọngọ ọnụ ma ọ bụ modul IO mgbe sistemụ na-arụ ọrụ. Ime nke a nwere ike ibute ujo ọkụ eletrik, sekit dị mkpụmkpụ ma ọ bụ arụghị ọrụ nke ngwaọrụ ahụ.
- Ekwela ka ihe ọla dị na mpụga metụ ngwaahịa ahụ aka mgbe sistemụ na-agba ọsọ. Ime nke a nwere ike ibute ujo ọkụ eletrik, sekit dị mkpụmkpụ ma ọ bụ arụghị ọrụ nke ngwaọrụ ahụ.
- Edokwala ngwaahịa a n'akụkụ ihe na-ere ọkụ. Ime otú ahụ nwere ike ịkpata ọkụ.
- Ọrụ wiwi niile kwesịrị ịbụ onye injinia eletrik ga-arụ.
- Mgbe ị na-ejikwa modul, hụ na mmadụ niile, ebe ọrụ na nkwakọ ngwaahịa nwere ntọala nke ọma. Zere imetụ ihe ndị na-eduzi emetụ aka, modul nwere ihe eletrọnịkị nke enwere ike ibibi site na mwepu electrostatic.
kpachara anya
- Ejila ngwaahịa a na gburugburu ebe okpomọkụ karịrị 60 ℃. Zere itinye ngwaahịa ahụ na ìhè anyanwụ.
- Ejila ngwaahịa a na gburugburu nwere iru mmiri karịrị 90%.
- Jiri ngwaahịa a mgbe niile na gburugburu nwere ogo mmetọ 1 ma ọ bụ 2.
- Jiri eriri ọkọlọtọ maka waya.
Banyere Sistemụ usoro G
Sistemu agwụlaview
- Ihe nkwụnye ihe ntanetị - Modul ihe nkwụnye netwọk na-emepụta njikọ dị n'etiti ụgbọ ala ubi na ngwaọrụ ubi nwere modul mgbasawanye. Njikọ na usoro ụgbọ ala ubi dị iche iche nwere ike ịmepụta site na nke ọ bụla n'ime modul nkwụnye netwọk kwekọrọ, dịka, maka MODBUS TCP, Ethernet IP, EtherCAT, PROFINET, CC-Link IE Field, PROFIBUS, CANopen, DeviceNet, CC-Link, MODBUS/Serial etc.
- Module Mgbasawanye - Ụdị modul mgbasawanye: Digital IO, Analog IO, na modul pụrụ iche.
- Izi ozi – Usoro na-eji ụdị ozi abụọ: ozi ọrụ na ozi IO.
Usoro nhazi data IO
Modul mgbasawanye nwere ụdị data atọ: data IO, nhazi nhazi, na ndekọ ebe nchekwa. A na-eme mgbanwe data n'etiti ihe nkwụnye netwọkụ na modul mgbasawanye site na IO nhazi data oyiyi site na n'ime protocol.
Ọsọ data n'etiti nkwụnye netwọkụ (oghere 63) na modul mgbasawanye
Ntinye na ntinye data onyonyo na-adabere na oghere oghere na ụdị data nke oghere mgbasawanye. Ịtụ ntinye na mmepụta data nhazi ihe oyiyi dabere na ọnọdụ oghere mgbasawanye. Agụnyere ngụkọ maka nhazi a n'akwụkwọ ntuziaka maka nkwụnye netwọkụ na modul IO mmemme.
Data paramita bara uru dabere na modul ndị a na-eji. Maka examplee, modul analog nwere ntọala
nke 0-20 mA ma ọ bụ 4-20 mA, modulu okpomọkụ nwekwara ntọala dịka PT100, PT200, na PT500. Akwụkwọ maka modulu ọ bụla na-enye nkọwa nke data paramita.
Nkọwapụta
Nkọwapụta gburugburu ebe obibi
| Ọnọdụ okpomọkụ na-arụ ọrụ | -20°C – 60°C |
| UL okpomọkụ | -20°C – 60°C |
| Ọnọdụ nchekwa | -40°C – 85°C |
| Iru mmiri dị ala | 5% - 90% na-abụghị condensing |
| Ịkwanye | DIN ụgbọ okporo ígwè |
| Shock arụ ọrụ | IEC 60068-2-27 (15G) |
| Nguzogide ịma jijiji | IEC 60068-2-6 (4 g) |
| Mgbapụta ụlọ ọrụ | EN 61000-6-4: 2019 |
| Mgbochi ụlọ ọrụ | EN 61000-6-2: 2019 |
| Ọnọdụ nwụnye | Vetikal na kehoraizin |
| Asambodo ngwaahịa | CE, FCC, UL, cUL |
Nkọwapụta izugbe
| Mgbasa ike | Oke. 30 mA @ 5 VDC |
| Nnọpụ iche | I/O na mgbagha: iche
Ike ubi: Enweghị ikewapụ |
| UL ubi ike | Tụkwasịnụ voltage: 24 VDC aha, klas2 |
| Ike ubi | Tụkwasịnụ voltage: 24 VDC ọnụ ọgụgụ Voltage nso: 18-30 VDC
Mgbasa ike: Max. 30 mA @ 24 VDC |
| Wiring | I/O cable max. 2.0mm2 (AWG 14) |
| Torque | 0.8 Nm (7 lb-ime) |
| Ibu | 58 g |
| Nha modul | 12 mm x 99 mm x 70 mm |
Akụkụ
Nkọwa ntinye
| Ntinye kwa modul | Ọwa 8 kwụsịrị otu, enweghị ike n'etiti ọwa |
| Ihe ngosi | Ọkwa ntinye akwụkwọ ndụ akwụkwọ ndụ 8 |
| Mkpebi na oke | 16 bit (gụnyere akara)
15 bits: 0.31 mV/bit (0-10 V), 0.15 mV/bit (0-5 V), 0.12 mV/bit (1-5 VDC) |
| Tinye nso nso ugbu a | 0-10 VDC, 0-5 VDC, 1-5 VDC |
| Ụdị data | 16 bit integer (otuto 2′) |
| Njehie modul | ± 0.1 % zuru oke @ 25 ℃ ambient
± 0.3 % zuru oke @ -40 Celsius, 70 ℃ |
| Ntinye mgbochi | 500 kΩ |
| Nchọpụta nchọpụta | Gbanyụọ ike nchọpụta nchọpụta: LED blinking
Ike ubi na: Ikanam gbanyụọ <0.5% (uru ntinye kacha elu) Ike ubi na: LED on> 0.5 % (uru ntinye kacha) |
| Oge ntụgharị | 0.5 ms / All channels |
| Nhazi mpaghara | Ọ dịghị mkpa |
| Ụdị nkịtị | 2 nkịtị, ike ubi 0 V bụ nkịtị (AGND) |
Eserese waya
| Ntụtụ ọ dịghị. | Nkọwa mgbaàmà |
| 0 | Ọwa ntinye 0 |
| 1 | Ọwa ntinye 1 |
| 2 | Ọwa ntinye 2 |
| 3 | Ọwa ntinye 3 |
| 4 | Ọwa ntinye 4 |
| 5 | Ọwa ntinye 5 |
| 6 | Ọwa ntinye 6 |
| 7 | Ọwa ntinye 7 |
| 8 | Ntinye ọwa nkịtị (AGND) |
| 9 | Ntinye ọwa nkịtị (AGND) |
Ihe ngosi LED
| LED mba. | LED ọrụ / nkọwa | Agba agba |
| 0 | INPUT ọwa 0 | Akwụkwọ ndụ akwụkwọ ndụ |
| 1 | INPUT ọwa 1 | Akwụkwọ ndụ akwụkwọ ndụ |
| 2 | INPUT ọwa 2 | Akwụkwọ ndụ akwụkwọ ndụ |
| 3 | INPUT ọwa 3 | Akwụkwọ ndụ akwụkwọ ndụ |
| 4 | INPUT ọwa 4 | Akwụkwọ ndụ akwụkwọ ndụ |
| 5 | INPUT ọwa 5 | Akwụkwọ ndụ akwụkwọ ndụ |
| 6 | INPUT ọwa 6 | Akwụkwọ ndụ akwụkwọ ndụ |
| 7 | INPUT ọwa 7 | Akwụkwọ ndụ akwụkwọ ndụ |
Ọnọdụ ọwa LED
| Ọnọdụ | Ikanam | Ngosipụta |
| Arụ ọrụ nkịtị | [Agbanyụrụ ọkụ <0.5% (ọnụahịa ntinye kacha)] -
Gbanyụọ ọwa [LED na> 0.5% (ọnụahịa ntinye kacha)] - Channel Green |
Arụ ọrụ nkịtị |
| Njehie ike ubi | Ọwa niile na-emegharị Green na gbanyụọ | Ejikọtaghị ike mpaghara |
Uru data / Voltage
Voltage range: 0-10 VDC
| Voltage | 0.0 V | 2.5 V | 5.0 V | 10.0 V |
| Data (Hex) | H0000 | H1FFF | H3FFF | H7FFF |
Voltage nso: 0-5 VDC
| Voltage | 0.0 V | 1.25 V | 2.5 V | 5.0 V |
| Data (Hex) | H0000 | H1FFF | H3FFF | H7FFF |
Voltage range: 1-5 VDC
| Voltage | 1.0 V | 2.0 V | 3.0 V | 5.0 V |
| Data (Hex) | H0000 | H1FFF | H3FFF | H7FFF |
Ịdepụta data n'ime tebụl onyonyo
Ntinye data modul
| Ntinye Analog Ch 0 |
| Ntinye Analog Ch 1 |
| Ntinye Analog Ch 2 |
| Ntinye Analog Ch 3 |
| Ntinye Analog Ch 4 |
| Ntinye Analog Ch 5 |
| Ntinye Analog Ch 6 |
| Ntinye Analog Ch 7 |
Tinye uru onyonyo
| Bit mba. | Bit 7 | Bit 6 | Bit 5 | Bit 4 | Bit 3 | Bit 2 | Bit 1 | Bit 0 |
| Byte 0 | Ntinye Analog Ch 0 obere byte | |||||||
| Byte 1 | Ntinye Analog Ch0 byte dị elu | |||||||
| Byte 2 | Ntinye Analog Ch 1 obere byte | |||||||
| Byte 3 | Ntinye Analog Ch1 byte dị elu | |||||||
| Byte 4 | Ntinye Analog Ch 2 obere byte | |||||||
| Byte 5 | Ntinye Analog Ch2 byte dị elu | |||||||
| Byte 6 | Ntinye Analog Ch 3 obere byte | |||||||
| Byte 7 | Ntinye Analog Ch3 byte dị elu | |||||||
| Byte 8 | Ntinye Analog Ch 4 obere byte | |||||||
| Byte 9 | Ntinye Analog Ch4 byte dị elu | |||||||
| Byte 10 | Ntinye Analog Ch 5 obere byte | |||||||
| Byte 11 | Ntinye Analog Ch5 byte dị elu | |||||||
| Byte 12 | Ntinye Analog Ch 6 obere byte | |||||||
| Byte 13 | Ntinye Analog Ch6 byte dị elu | |||||||
| Byte 14 | Ntinye Analog Ch 7 obere byte | |||||||
| Byte 15 | Ntinye Analog Ch7 byte dị elu | |||||||
Data Parameter
Ogologo oke oke: 10 Bytes
| Bit mba. | Bit 7 | Bit 6 | Bit 5 | Bit 4 | Bit 3 | Bit 2 | Bit 1 | Bit 0 |
| Byte 0 | Voltage range for Ch 0 (H00: 0-10 VDC, H01: 0-5 VDC, H02: 1-5 VDC) | |||||||
| Byte 1 | Voltage range for Ch 1 (H00: 0-10 VDC, H01: 0-5 VDC, H02: 1-5 VDC) | |||||||
| Byte 2 | Voltage range for Ch 2 (H00: 0-10 VDC, H01: 0-5 VDC, H02: 1-5 VDC) | |||||||
| Byte 3 | Voltage range for Ch 3 (H00: 0-10 VDC, H01: 0-5 VDC, H02: 1-5 VDC) | |||||||
| Byte 4 | Voltage range for Ch 4 (H00: 0-10 VDC, H01: 0-5 VDC, H02: 1-5 VDC) | |||||||
| Byte 5 | Voltage range for Ch 5 (H00: 0-10 VDC, H01: 0-5 VDC, H02: 1-5 VDC) | |||||||
| Byte 6 | Voltage range for Ch 6 (H00: 0-10 VDC, H01: 0-5 VDC, H02: 1-5 VDC) | |||||||
| Byte 7 | Voltage range for Ch 7 (H00: 0-10 VDC, H01: 0-5 VDC, H02: 1-5 VDC) | |||||||
| Byte 8 | Filter Time (H00: Default (20), H01: Fastest, H3E: Slowest ) | |||||||
| Byte 9 | Modul e resolu tion (0: 16-
bit (defau lt), 1: 14-bit) |
Echekwara | ||||||
Ntọala ngwaike
kpachara anya
- Always read this section before installing the module!
- Hot surface! The surface of the housing can become hot during operation. If the module is used in high ambient temperatures, always let it cool down before touching it.
- Working on energized devices can damage the equipment! Always turn off the power supply before working on the module.
Achọrọ oghere
Eserese ndị a na-egosi oghere chọrọ mgbe ị na-etinye modul G-usoro. Oghere ahụ na-emepụta ohere maka ikuku ventilashị, ma na-egbochi nnyonye anya electromagnetic na-eme ka ọ ghara imetụta ọrụ ahụ. Ọkwa nwụnye bụ vetikal na kehoraizin dị irè. Eserese ndị a bụ ihe atụ ma nwee ike ghara oke.
kpachara anya
Ịgbasoghị oghere chọrọ nwere ike bute mmebi ngwaahịa.
Ugwu Module gaa na DIN Rail
Isiakwụkwọ ndị na-esonụ na-akọwa otu esi ebugo modul na okporo ígwè DIN.
kpachara anya
A ghaghị idozi modul ahụ na okporo ígwè DIN na ihe mkpuchi mkpọchi.
Ugwu GL-9XXX ma ọ bụ GT-XXXX Module
Ntuziaka ndị a metụtara ụdị modul ndị a:
- GL-9XXX
- GT-1XXX
- GT-2XXX
- GT-3XXX
- GT-4XXX
- GT-5XXX
- GT-7XXX
Modul GN-9XXX nwere oghere mkpọchi atọ, otu na ala na abụọ n'akụkụ. Maka ntuziaka nwụnye, rụtụ aka na Modul Ugwu GN-9XXX.
Ugwu GN-9XXX Module
Iji bulie ma ọ bụ tụtuo ihe nkwụnye netwọkụ ma ọ bụ modul IO nwere ike ime ya nwere aha ngwaahịa GN-9XXX, maka ex.ampGN-9251 ma ọ bụ GN-9371, lee ntuziaka ndị a:
Ngwongwo ọdụ ụgbọ elu nke mbughari
Iji rịgoro ma ọ bụ tụtuo ngọngọ ọdụ mbughari (RTB), lee ntuziaka n'okpuru.
Jikọọ eriri na ngọngọ njedebe mbughari
Ka ijikọ/ịpụpụ eriri na/site na ngọngọ nkwụsị mbughari (RTB), hụ ntuziaka dị n'okpuru.
Ịdọ aka ná ntị
Jiri ọkọnọ akwadoro mgbe niiletage na ugboro ugboro iji gbochie mmebi nke akụrụngwa ma hụ na arụmọrụ kacha mma.
Ike ubi na ntụtụ data
Nkwurịta okwu n'etiti ihe nkwụnye netwọk G-usoro na modul mgbasawanye, yana usoro / ubi ọkụ nke modul ụgbọ ala na-eme site na ụgbọ ala ime. Ọ nwere pinni ike Ubi 2 na ntụtụ data 6.
Ịdọ aka ná ntị
Emetụla data na ntụtụ ike ubi aka! Imetụ aka nwere ike ime ka ụda ESD mebie ma mebie ya.
| Ntụtụ ọ dịghị. | Aha | Nkọwa |
| P1 | Sistemụ VCC | Sistemu ọkọnọ voltage (5VDC) |
| P2 | Sistemụ GND | Sistemụ ala |
| P3 | Mbupute akara | Token mmepụta ọdụ ụgbọ mmiri nke processor modul |
| P4 | Serial mmepụta | Ọdụ ụgbọ mmiri ihe nrụpụta modul processor |
| P5 | Ntinye usoro | Modul ntinye ihe nnata nke ihe nrụpụta |
| P6 | Echekwara | Edobere maka akara mgbanaka ụzọ |
| P7 | Mpaghara GND | Ala ubi |
| P8 | Mpaghara VCC | Ọkụ ọkọnọ voltage (24VDC) |
Nwebiisinka © 2025 Beijer Electronics AB. Ikike niile echekwabara.
Ozi dị na akwụkwọ a nwere ike ịgbanwe n'enweghị ọkwa ma nye ya dị ka ọ dị n'oge mbipụta. Beijer Electronics AB nwere ikike ịgbanwe ozi ọ bụla na-emeliteghị akwụkwọ a. Beijer Electronics AB anaghị ewere ọrụ maka mperi ọ bụla nwere ike ịpụta na akwụkwọ a. All examples na akwụkwọ a bụ naanị iji kwalite nghọta nke ọrụ na njikwa akụrụngwa. Beijer Electronics AB enweghị ike iburu ụgwọ ọ bụla ma ọ bụrụ na ndị a bụbuampA na-eji les eme ihe n'ezie ngwa.
In view nke ngwa dị iche iche maka ngwa ngwanrọ a, ndị ọrụ ga-enwerịrị ihe ọmụma zuru oke n'onwe ha iji hụ na ejiri ya nke ọma na ngwa ha akọwapụtara. Ndị na-ahụ maka ngwa na akụrụngwa ga-ahụrịrị na ngwa ọ bụla dabara na ihe niile achọrọ, ụkpụrụ na iwu gbasara nhazi na nchekwa. Beijer Electronics AB agaghị anabata ụgwọ ọ bụla maka mmebi ọ bụla mebiri n'oge nrụnye ma ọ bụ iji akụrụngwa a kpọtụrụ aha n'akwụkwọ a. Beijer Electronics AB amachibidoro mgbanwe, mgbanwe ma ọ bụ ntughari nke akụrụngwa niile.
Isi ụlọ ọrụ
- Ụlọ ọrụ Beijer Electronics AB (publ)
- Igbe 426
- 201 24 Malmö, Sweden
- www.beijerelectronics.com / +46 40 358600
FAQ
Kedu ihe m ga-eme ma ọ bụrụ na egosi LED anaghị agba ọkụ?
Check the wiring connections to ensure they are secure and correct. Also, verify power supply to the module.
Akwụkwọ / akụrụngwa
 |
Beijer ELECTRONICS GT-3468 Analog Ntinye Module [pdf] Akwụkwọ ntuziaka onye ọrụ GT-3468 Module Ntinye Analog, GT-3468, Module Ntinye Analog, Module Ntinye, Module |