ọdịnaya zoo
1 Beijer ELECTRONICS GT-1B7F Digital Input and Output Module
2 Nkọwapụta
3 Banyere akwụkwọ ntuziaka a
4 Akara ndị ejiri n'akwụkwọ ntuziaka a
5 Nchekwa
6 Asambodo ngwaahịa
7 Banyere Sistemụ usoro G
8 Nkọwapụta izugbe
9 Akụkụ
10 Nkọwa ntinye
11 Nkọwapụta mmepụta
12 Eserese waya
13 Ihe ngosi LED
13.1 Ịdepụta data n'ime tebụl onyonyo
13.2 Data Parameter
13.3 Ntọala ngwaike
13.4 Ajụjụ
14 Akwụkwọ / akụrụngwa
14.1 Ntụaka

Beijer-ELECTRONICS-akara ngosi

Beijer ELECTRONICS GT-1B7F Digital Input and Output Module

Beijer-ELECTRONICS-GT-1B7F-Digital-Input-and-Output-Module-product

Nkọwapụta

Ọnọdụ okpomọkụ na-arụ ọrụ -20°C – 60°C
UL okpomọkụ -20°C – 60°C
Ọnọdụ nchekwa -40°C – 85°C
Iru mmiri dị ala 5% - 90% na-abụghị condensing
Ịkwanye DIN ụgbọ okporo ígwè
Shock arụ ọrụ IEC 60068-2-27 (15G)
Nguzogide ịma jijiji IEC 60068-2-6 (4 g)
Mgbapụta ụlọ ọrụ EN 61000-6-4: 2019
Mgbochi ụlọ ọrụ EN 61000-6-2: 2019
Ọnọdụ nwụnye Vetikal na kehoraizin
Asambodo ngwaahịa CE, FCC, UL, cUL

Ozi dị na akwụkwọ a nwere ike ịgbanwe n'enweghị ọkwa ma nye ya dị ka ọ dị n'oge mbipụta. Beijer Electronics AB nwere ikike ịgbanwe ozi ọ bụla na-emeliteghị akwụkwọ a. Beijer Electronics AB anaghị ewere ọrụ maka mperi ọ bụla nwere ike ịpụta na akwụkwọ a. All examples na akwụkwọ a bụ naanị iji kwalite nghọta nke ọrụ na njikwa akụrụngwa. Beijer Electronics AB enweghị ike iburu ụgwọ ọ bụla ma ọ bụrụ na ndị a bụbuampA na-eji les eme ihe n'ezie ngwa.
In view nke ngwa dị iche iche maka ngwa ngwanrọ a, ndị ọrụ ga-enwerịrị ihe ọmụma zuru oke n'onwe ha iji hụ na ejiri ya nke ọma na ngwa ha akọwapụtara. Ndị na-ahụ maka ngwa na akụrụngwa ga-ahụrịrị na ngwa ọ bụla dabara na ihe niile achọrọ, ụkpụrụ na iwu gbasara nhazi na nchekwa. Beijer Electronics AB agaghị anabata ụgwọ ọ bụla maka mmebi ọ bụla mebiri n'oge nrụnye ma ọ bụ iji akụrụngwa a kpọtụrụ aha n'akwụkwọ a. Beijer Electronics AB amachibidoro mgbanwe, mgbanwe ma ọ bụ ntughari nke akụrụngwa niile.

 Banyere akwụkwọ ntuziaka a

This manual contains information on the software and hardware features of the Beijer Electronics GT-1B7F Digital Input/Output Module. It provides in-depth specifications, guidance on installation, setup, and usage of the product.

Akara ndị ejiri n'akwụkwọ ntuziaka a

Edemede a gụnyere ịdọ aka ná ntị, ịkpachara anya, ndetu na akara ngosi ndị dị mkpa ebe kwesịrị ekwesị, iji rụtụ aka nchekwa, ma ọ bụ ozi ndị ọzọ dị mkpa. Ekwesịrị ịkọwapụta akara ndị kwekọrọ ka ndị a:

  • Beijer-ELECTRONICS-GT-1B7F-Digital-Input-and-Output-Module (1)Ịdọ aka ná ntị
    Akara ngosi ịdọ aka ná ntị na-egosi ọnọdụ nwere ike ịdị ize ndụ nke, ọ bụrụ na ewepụghị ya, nwere ike bute ọnwụ ma ọ bụ mmerụ ahụ dị ukwuu, yana nnukwu mmebi ngwaahịa ahụ.
  • Beijer-ELECTRONICS-GT-1B7F-Digital-Input-and-Output-Module (3)kpachara anya
    Akara ịkpachara anya na-egosi ọnọdụ nwere ike ịdị ize ndụ nke, ma ọ bụrụ na ewepụghị ya, nwere ike bute mmerụ ahụ dị obere ma ọ bụ agafeghị oke yana mmebi nke ngwaahịa ahụ.
  • Beijer-ELECTRONICS-GT-1B7F-Digital-Input-and-Output-Module (4)IHE
    Akara ndetu na-eme ka onye na-agụ mara eziokwu na ọnọdụ dị mkpa.
  • Beijer-ELECTRONICS-GT-1B7F-Digital-Input-and-Output-Module (5)IHE dị mkpa
    Akara ngosi dị mkpa na-eme ka ozi dị mkpa pụta ìhè.

 Nchekwa

Tupu iji ngwaahịa a, biko jiri nlezianya gụọ akwụkwọ ntuziaka a na akwụkwọ ntuziaka ndị ọzọ dị mkpa. Lezienụ anya na ntuziaka nchekwa!
Ọ dịghị ihe ọ bụla Beijer Electronics ga-ahụ maka ma ọ bụ kwụọ ụgwọ maka mmebi sitere na iji ngwaahịa a.
Foto ndị a, examples na eserese dị n'akwụkwọ ntuziaka a ka etinyere maka ebumnuche atụ. N'ihi ọtụtụ mgbanwe na ihe achọrọ metụtara nrụnye ọ bụla, Beijer Electronics enweghị ike ibu ọrụ ma ọ bụ ụgwọ maka iji ya eme ihe dabere na mbụ.amples na eserese.

 Asambodo ngwaahịa

Ngwaahịa ahụ nwere asambodo ngwaahịa ndị a.

Beijer-ELECTRONICS-GT-1B7F-Digital-Input-and-Output-Module (6)

General Safety chọrọ

Ịdọ aka ná ntị

  • Do not assemble the products and wires with power connected to the system. Doing so cause an “arc flash”, which can result in unexpected dangerous events
    (ọkụ, ọkụ, ihe na-efe efe, nrụgide mgbawa, ụda ụda, okpomọkụ).
  •  Emetụkwala ngọngọ ọnụ ma ọ bụ modul IO mgbe sistemụ na-arụ ọrụ. Ime nke a nwere ike ibute ujo ọkụ eletrik, sekit dị mkpụmkpụ ma ọ bụ arụghị ọrụ nke ngwaọrụ ahụ.
  • Ekwela ka ihe ọla dị na mpụga metụ ngwaahịa ahụ aka mgbe sistemụ na-agba ọsọ. Ime nke a nwere ike ibute ujo ọkụ eletrik, sekit dị mkpụmkpụ ma ọ bụ arụghị ọrụ nke ngwaọrụ ahụ.
  •  Edokwala ngwaahịa a n'akụkụ ihe na-ere ọkụ. Ime otú ahụ nwere ike ịkpata ọkụ.
  • Ọrụ wiwi niile kwesịrị ịbụ onye injinia eletrik ga-arụ.
  • Mgbe ị na-ejikwa modul, hụ na mmadụ niile, ebe ọrụ na nkwakọ ngwaahịa nwere ntọala nke ọma. Zere imetụ ihe ndị na-eduzi emetụ aka, modul nwere ihe eletrọnịkị nke enwere ike ibibi site na mwepu electrostatic.

kpachara anya

  • Ejila ngwaahịa a na gburugburu ebe okpomọkụ karịrị 60 ℃. Zere itinye ngwaahịa ahụ na ìhè anyanwụ.
  • Ejila ngwaahịa a na gburugburu nwere iru mmiri karịrị 90%.
  • Jiri ngwaahịa a mgbe niile na gburugburu nwere ogo mmetọ 1 ma ọ bụ 2.
  • Jiri eriri ọkọlọtọ maka waya.

Banyere Sistemụ usoro G

Beijer-ELECTRONICS-GT-1B7F-Digital-Input-and-Output-Module (7)

Sistemu agwụlaview

  •  Ihe nkwụnye ihe ntanetị - Modul ihe nkwụnye netwọk na-emepụta njikọ dị n'etiti ụgbọ ala ubi na ngwaọrụ ubi nwere modul mgbasawanye. Njikọ na usoro ụgbọ ala ubi dị iche iche nwere ike ịmepụta site na nke ọ bụla n'ime modul nkwụnye netwọk kwekọrọ, dịka, maka MODBUS TCP, Ethernet IP, EtherCAT, PROFINET, CC-Link IE Field, PROFIBUS, CANopen, DeviceNet, CC-Link, MODBUS/Serial etc.
  • Module Mgbasawanye - Ụdị modul mgbasawanye: Digital IO, Analog IO, na modul pụrụ iche.
  •  Izi ozi – Usoro na-eji ụdị ozi abụọ: ozi ọrụ na ozi IO.

 Usoro nhazi data IO
Modul mgbasawanye nwere ụdị data atọ: data IO, nhazi nhazi, na ndekọ ebe nchekwa. A na-eme mgbanwe data n'etiti ihe nkwụnye netwọkụ na modul mgbasawanye site na IO nhazi data oyiyi site na n'ime protocol.

  • Beijer-ELECTRONICS-GT-1B7F-Digital-Input-and-Output-Module (8)Ọsọ data n'etiti nkwụnye netwọkụ (oghere 63) na modul mgbasawanye
  • Ntinye na ntinye data onyonyo na-adabere na oghere oghere na ụdị data nke oghere mgbasawanye. Ịtụ ntinye na mmepụta data nhazi ihe oyiyi dabere na ọnọdụ oghere mgbasawanye. Agụnyere ngụkọ maka nhazi a n'akwụkwọ ntuziaka maka nkwụnye netwọkụ na modul IO mmemme.
  • Data paramita bara uru dabere na modul ndị a na-eji. Maka examplee, modul analog nwere ntọala
    of either 0-20 mA or 4-20 mA, and temperature modules have settings such as PT100, PT200, and PT500. The documentation for each module provides a description of the parameter data.

Nkọwapụta izugbe

Mgbasa ike Oke. 60 mA @ 5 VDC
Nnọpụ iche I/O maka mgbagha: ikewapụ fotocoupler
UL ubi ike Tụkwasịnụ voltage: 24 VDC ọnụ ọgụgụ, klas 2
Ike ubi Tụkwasịnụ voltage: 24 VDC ọnụ ọgụgụ Voltage range: 15 – 28.8 VDCPower dissipation: 55 mA @ 24 VDC
Wiring I/O cable max. 0.75 mm2 (AWG 18)
Ibu 63 g
Nha modul 12 mm x 109 mm x 70 mm

 Akụkụ

Beijer-ELECTRONICS-GT-1B7F-Digital-Input-and-Output-Module (9)

Nkọwa ntinye

Ntinye kwa modul 16 isi sink ụdị
Ihe ngosi Ọkwa ntinye akwụkwọ ndụ akwụkwọ ndụ 16
Na steeti voltage 24 VDC nominal (≤ field power)15 – 28.8 VDC @ 60 ℃
Ọnọdụ ugbu a na steeti 3.2 mA @ 24 VDC3.8 mA @ 30 VDC
Off-steeti voltage 12.5 VDC @ 25 ℃
Ntinye nrịbama oge OFF to ON: Max. 0.4 msON to OFF: Max. 0.5 ms
Ntinye ntinye Enwere ike idozi, ruo 10 ms
Mgbochi ntinye aha aha 10.58K Ω nkịtị
Ụdị nkịtị 16 points / 2 COM (Sink)

 Nkọwapụta mmepụta

Mpụta kwa modul 16 points source type
Ihe ngosi 16 green output status
Mmepụta voltage oke 24 VDC nominal
15 – 28.8 VDC @ 60 ℃
Na steeti voltage dobe 0.3 VDC @ 25 ℃0.3 VDC @ 60 ℃
Na steeti min. ugbu a Min. 1mA
Mwepu na-adịghị na steeti ugbu a Oke. 10 uA
Oge mgbaama mmepụta OFF to ON: Max. 0.3 msON to OFF: Max. 0.5 ms
Wepụta ọkwa dị ugbu a Oke. 0.3 A kwa ọwa / Max. 4.8 A kwa otu
Nchedo Over current limit: 12 A @ 25 °C each channel Thermal shutdown: 175 °C @ 25 °C each channelShort-circuit protection
Ụdị nkịtị 16 points / 2 COM (source)

Eserese waya

Beijer-ELECTRONICS-GT-1B7F-Digital-Input-and-Output-Module (10)

Ntụtụ ọ dịghị. Nkọwa mgbaàmà
0 Input/Output channel 0
1 Input/Output channel 1
2 Input/Output channel 2
3 Input/Output channel 3
4 Input/Output channel 4
5 Input/Output channel 5
6 Input/Output channel 6
7 Input/Output channel 7
8 Input/Output channel 8
9 Input/Output channel 9
10 Input/Output channel 10
11 Input/Output channel 11
12 Input/Output channel 12
13 Input/Output channel 13
14 Input/Output channel 14
15 Input/Output channel 15
16 Ndị nkịtị (ike ubi 0V)
17 Ndị nkịtị (ike ubi 24V)

Ihe ngosi LED

Beijer-ELECTRONICS-GT-1B7F-Digital-Input-and-Output-Module (1)

LED mba. Ọrụ / nkọwa LED Agba agba
0 Input/Output channel 0 Akwụkwọ ndụ akwụkwọ ndụ
1 Input/Output channel 1
2 Input/Output channel 2
3 Input/Output channel 3
4 Input/Output channel 4
5 Input/Output channel 5
6 Input/Output channel 6
7 Input/Output channel 7
8 Input/Output channel 8
9 Input/Output channel 9
10 Input/Output channel 10
11 Input/Output channel 11
12 Input/Output channel 12
13 Input/Output channel 13
14 Input/Output channel 14
15 Input/Output channel 15

Ọnọdụ ọwa LED

Ọnọdụ Ikanam Ngosipụta
Enweghị mgbama Gbanyụọ Arụ ọrụ nkịtị
Signal Akwụkwọ ndụ akwụkwọ ndụ Arụ ọrụ nkịtị

Ịdepụta data n'ime tebụl onyonyo

Ntinye data modul

D7 D6 D5 D4 D3 D2 D1 D0
D15 D14 D13 D12 D11 D10 D9 D8

Beijer-ELECTRONICS-GT-1B7F-Digital-Input-and-Output-Module (11)

Tinye uru onyonyo

Bit mba. Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Byte 0 D7 D6 D5 D4 D3 D2 D1 D0
Byte 1 D15 D14 D13 D12 D11 D10 D9 D8

Ọnụ ego onyonyo wepụta

Bit mba. Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Byte 0 D7 D6 D5 D4 D3 D2 D1 D0
Byte 1 D15 D14 D13 D12 D11 D10 D9 D8

Beijer-ELECTRONICS-GT-1B7F-Digital-Input-and-Output-Module (11)Data modul mmepụta

D7 D6 D5 D4 D3 D2 D1 D0
D15 D14 D13 D12 D11 D10 D9 D8

 Data Parameter

The parameter length is 8 bytes.

 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Byte 0 Operation selection (ch0 – ch7) 0: Input1: Output
Byte 1 Operation selection (ch8 – ch15) 0: Input1: Output
Byte 2 Fault action (ch0 – ch7) 0: Fault value1: Hold last state
Byte 3 Fault action (ch8 – ch15) 0: Fault value1: Hold last state
Byte 4 Fault value (ch0 – ch7) 0: Off1: On
Byte 5 Fault value (ch8 – ch15) 0: Off1: On
Byte 6 Input filter value: 0 – 10 ms
Byte 7 Echekwara

IHE dị mkpa
If you change Operation selection, you must cycle power (turn the module off and on) for the change to take effect.

 Ntọala ngwaike

kpachara anya

  • Na-agụ isiakwụkwọ a mgbe niile tupu ịwụnye modul!
  • Elu dị ọkụ! Elu ụlọ ahụ nwere ike ịdị ọkụ n'oge ọrụ. Ọ bụrụ na a na-eji ngwaọrụ ahụ na okpomọkụ dị elu, hapụ ka ngwaọrụ ahụ daa jụụ tupu ya emetụ ya aka.
  • Ịrụ ọrụ na ngwaọrụ ike nwere ike imebi akụrụngwa! Gbanyụọ ọkụ mgbe niile tupu ịrụ ọrụ na ngwaọrụ.

 Achọrọ oghere
Eserese ndị a na-egosi oghere chọrọ mgbe ị na-etinye modul G-usoro. Oghere ahụ na-emepụta ohere maka ikuku ventilashị, ma na-egbochi nnyonye anya electromagnetic na-eme ka ọ ghara imetụta ọrụ ahụ. Ọkwa nwụnye bụ vetikal na kehoraizin dị irè. Eserese ndị a bụ ihe atụ ma nwee ike ghara oke.

kpachara anya
Ịgbasoghị oghere chọrọ nwere ike bute mmebi ngwaahịa.

Beijer-ELECTRONICS-GT-1B7F-Digital-Input-and-Output-Module (8)

Ugwu Module gaa na DIN Rail
Isiakwụkwọ ndị na-esonụ na-akọwa otu esi ebugo modul na okporo ígwè DIN.

kpachara anya
A ghaghị idozi modul ahụ na okporo ígwè DIN na ihe mkpuchi mkpọchi.

Ugwu GL-9XXX ma ọ bụ GT-XXXX Module
Ntuziaka ndị a metụtara ụdị modul ndị a:

  • GL-9XXX
  • GT-1XXX
  • GT-2XXX
  • GT-3XXX
  • GT-4XXX
  •  GT-5XXX
  •  GT-7XXX

Modul GN-9XXX nwere oghere mkpọchi atọ, otu na ala na abụọ n'akụkụ. Maka ntuziaka nwụnye, rụtụ aka na Modul Ugwu GN-9XXX.Beijer-ELECTRONICS-GT-1B7F-Digital-Input-and-Output-Module (12)

 Ugwu GN-9XXX Module
Iji bulie ma ọ bụ tụtuo ihe nkwụnye netwọkụ ma ọ bụ modul IO nwere ike ime ya nwere aha ngwaahịa GN-9XXX, maka ex.ampGN-9251 ma ọ bụ GN-9371, lee ntuziaka ndị a:

Beijer-ELECTRONICS-GT-1B7F-Digital-Input-and-Output-Module (13)

Ngwongwo ọdụ ụgbọ elu nke mbughari
Iji rịgoro ma ọ bụ tụtuo ngọngọ ọdụ mbughari (RTB), lee ntuziaka n'okpuru.

Beijer-ELECTRONICS-GT-1B7F-Digital-Input-and-Output-Module (13)

Jikọọ eriri na ngọngọ njedebe mbughari
Ka ijikọ/ịpụpụ eriri na/site na ngọngọ nkwụsị mbughari (RTB), hụ ntuziaka dị n'okpuru.

Ịdọ aka ná ntị
Jiri ọkọnọ akwadoro mgbe niiletage na ugboro ugboro iji gbochie mmebi nke akụrụngwa ma hụ na arụmọrụ kacha mma.

Beijer-ELECTRONICS-GT-1B7F-Digital-Input-and-Output-Module (16)

  • Ike ubi na ntụtụ data
    Nkwurịta okwu n'etiti ihe nkwụnye netwọk G-usoro na modul mgbasawanye, yana usoro / ubi ọkụ nke modul ụgbọ ala na-eme site na ụgbọ ala ime. Ọ nwere pinni ike Ubi 2 na ntụtụ data 6.
  • Ịdọ aka ná ntị
    Emetụla data na ntụtụ ike ubi aka! Imetụ aka nwere ike ime ka ụda ESD mebie ma mebie ya.

Beijer-ELECTRONICS-GT-1B7F-Digital-Input-and-Output-Module (15)

Ntụtụ ọ dịghị. Aha Nkọwa
P1 Sistemụ VCC Sistemu ọkọnọ voltage (5VDC)
P2 Sistemụ GND Sistemụ ala
P3 Mbupute akara Token mmepụta ọdụ ụgbọ mmiri nke processor modul
P4 Serial mmepụta Ọdụ ụgbọ mmiri ihe nrụpụta nke modul processor
P5 Ntinye usoro ọdụ ụgbọ mmiri ntinye ihe nnata nke modul processor
P6 Echekwara Edobere maka akara mgbanaka ụzọ
P7 Mpaghara GND Ala ubi
P8 Mpaghara VCC Ọkụ ọkọnọ voltage (24VDC)

Ajụjụ

What should I do if I encounter an issue with the module?

If you encounter any issues with the module, refer to the troubleshooting section in the user manual or contact customer support for assistance.

Akwụkwọ / akụrụngwa

Beijer ELECTRONICS GT-1B7F Digital Input and Output Module [pdf] Akwụkwọ ntuziaka onye ọrụ
GT-1B7F, GT-1B7F Digital Input and Output Module, Digital Input and Output Module, Input and Output Module, Module

Ntụaka

Hapụ ikwu

Agaghị ebipụta adreesị ozi-e gị. Akara mpaghara achọrọ akara *