Ntuziaka onye ọrụ behringer Wing Rack

Q: Enwere m ike iji ụdị plọg ọ bụla nwere WING RACK?
- A: Mba, ọ dị mkpa iji ụdị plọgụ ziri ezi dịka akọwapụtara na ntuziaka nchekwa.
Q: Kedu ihe m ga-eme ma ọ bụrụ na plọgụ enyereghị nke m ntinye?
- A: Kpọtụrụ onye na-ahụ maka ọkụ eletrik maka nnọchi nke ochie ntinye iji hụ na nchekwa.

Ntuziaka nchekwa dị mkpa

Ebe akara akara a na-ebu ọkụ eletrik zuru oke iji bụrụ ihe egwu nke ujo eletrik. Jiri naanị eriri ọkà okwu ọkachamara dị elu nwere ¼” TS ma ọ bụ plọg akpọchi akpọchi etinyegoro nke ọma. Ekwesịrị ịrụ nrụnye ma ọ bụ mgbanwe niile naanị site na ndị ọrụ tozuru etozu.

Akara a, ebe ọ bụla ọ pụtara, na-eme ka ị mata na ọnụnọ voltage n'ime ogige - voltage nke nwere ike zuru ezu iji mee ihe ize ndụ nke ujo.
Akara a, ebe ọ bụla ọ pụtara, na-eme ka ị mata ntuziaka ọrụ dị mkpa na nrụzi na akwụkwọ na-esote. Biko gụọ akwụkwọ ntuziaka.

Ịkpachara anya

Iji belata ihe ize ndụ nke ujo eletrik, ewepụla mkpuchi elu (ma ọ bụ akụkụ azụ).
Enweghị akụkụ ndị ọrụ nwere ike ime n'ime. Tụtụ aka na ndị ọrụ ruru eru.
Iji belata ihe ize ndụ nke ọkụ ma ọ bụ ọkụ eletrik, ekpuchila ngwa a na mmiri ozuzo na mmiri. A gaghị ekpuchi ngwa ahụ na mmiri na-asọpụta ma ọ bụ na-agbapụ ma ọ dịghị ihe jupụtara na mmiri mmiri, dị ka vases, ka a ga-etinye na ngwa ahụ.
Ntuziaka ọrụ ndị a bụ maka naanị ndị ọrụ ruru eru.
Iji belata ihe egwu nke ujo eletrik anaghị arụ ọrụ ọ bụla karịa nke dị na ntuziaka ọrụ. Ndị ọrụ ruru eru ga-arụzigharị ya.

Ịdọ aka ná ntị

Biko rụtụ aka na ozi dị na mpụta nke mkpuchi ala maka ozi eletriki na nchekwa tupu ịwụnye ma ọ bụ rụọ ọrụ ngwaọrụ.

Biko gụọ ma soro ntuziaka na ịdọ aka ná ntị niile.
Debe ngwa ahụ na mmiri (belụsọ ngwaahịa dị n'èzí).
Jiri akwa kpọrọ nkụ hichaa naanị.
Akwụsịla oghere ikuku. Awụnyela n'ime oghere akpọchiri. Wụnye naanị dịka ntuziaka onye nrụpụta si dị.
Chebe eriri ọkụ ka ọ ghara imebi, ọkachasị na plọg na oghere ngwa.
Awụnyela n'akụkụ ebe okpomọkụ ọ bụla dị ka radiators, ndekọ okpomọkụ, stovu ma ọ bụ ngwa ndị ọzọ (gụnyere amplifiers) nke na-emepụta okpomọkụ.
Emebila ebumnuche nchekwa nke plọg a na-agbapụta ma ọ bụ ntọ ala. Plọg nwere oghere abụọ nwere obosara karịa nke ọzọ (naanị maka USA na Canada). Ụdị nkwụnye ala nwere agụba abụọ na oghere mgbada nke atọ. A na-enye oghere sara mbara ma ọ bụ akụkụ nke atọ maka nchekwa gị. Ọ bụrụ na plọg e nyere adabaghị n'ime oghere gị, kpọtụrụ onye na-ahụ maka ọkụ eletrik ka ọ dochie ebe nkwụnye ahụ ochie.
Jiri naanị mgbakwunye na ngwa ndị nrụpụta kwadoro.
Jiri naanị ụgbọ ala akọwapụtara, steetị, tripod, braket, ma ọ bụ tebụl. Jiri nlezianya gbochie ntụnye aka mgbe ị na-ebugharị ngwakọta ụgbọ ibu/ ngwa.
Kwụpụ n'oge oké ifufe, ma ọ bụ ọ bụrụ na ọ naghị eji ya ogologo oge.
Jiri naanị ndị ọrụ tozuru etozu maka ije ozi, ọkachasị ma emebie ya.
Ngwa nwere ọnụ ala nchebe ga-ejikọta ya na oghere MAINS nwere njikọ ntanye nchebe.
Ebe a na-eji plọg MAINS ma ọ bụ ihe njikọ ngwa dị ka ngwaọrụ nkwụsị, ngwaọrụ nkwụsị ga-anọgide na-arụ ọrụ ngwa ngwa.
Zere ịwụnye n'ime oghere dị ka akpa akwụkwọ.
Etinyekwala isi iyi ọkụ gba ọtọ, dị ka kandụl ọkụ, na ngwa.
Ọnọdụ okpomọkụ na-arụ ọrụ dị 5° ruo 45°C (41° ruo 113°F).

NKWESỊRỊ IWU

Egwu Egwu anaghị anabata ụgwọ ọ bụla maka mfu ọ bụla nke onye ọ bụla nwere ike ịta ahụhụ nke dabere kpamkpam ma ọ bụ akụkụ ya na nkọwa, foto, ma ọ bụ nkwupụta ọ bụla dị n'ime ebe a. Nkọwa nka na ụzụ, ọdịdị na ozi ndị ọzọ nwere ike ịgbanwe n'enweghị ọkwa. Akara ụghalaahịa niile bụ akụ nke ndị nwe ha. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Aston Microphones na Coolaudio bụ ụghalaahịa ma ọ bụ ụghalaahịa edenyere n'akwụkwọ ikikere nke Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2024 Ikike niile. edobere.

OKWU MMADỤ

Maka usoro na ọnọdụ akwụkwọ ikike dị na ozi agbakwunyere gbasara ikike nke Music Tribe's Limited, biko hụ nkọwa zuru ezu n'ịntanetị na community.musictribe.com/support.

Okwu mmalite

Ekele maka ịzụrụ iheasing the ground-breaking WING RACK console. Read through this Quick Start Guide (QSG) to get an overview nke ọrụ na nleta WING behringer.com maka nkuzi vidiyo na ntuziaka.

Tupu ịmalite

A na-atụ aro ka ịlele behringer.com maka mmelite firmware, dịka a ga-ahapụ atụmatụ ọhụrụ na ndozi ahụhụ mgbe niile. Biko rụtụ aka na isi nke 7 na QSG a maka nkọwa gbasara usoro mmelite.
Ndị otu mmepe anyị na-achọsi ike ịgụ nzaghachi gị na echiche.behringer.com wee tụrụ gị n'anya site na nkwalite na atụmatụ ọhụrụ.

Isi mmalite na ọwa – ụzọ ọhụrụ ụzọ ụzọ

WING ewebatala ụzọ ọhụrụ nke iji aha, akara ngosi na agba ya na akara anụ ahụ ha. Enwere ike itinye isi mmalite WING n'ime otu ọwa ma ọ bụ ọtụtụ maka nhazi mgbaàmà ma ọ bụ iji ụgbọ ala ma ọ bụ bọs isi. Enwere ike ịmegharị ha ozugbo na mmepụta anụ ahụ ọ bụla mgbe enweghị nhazi ọ bụla achọrọ, dị ka na nhazi ndekọ, ma ọ bụ mgbe ya na njikwa ọzọ na-ekerịta ọdịyo maka ngwakọta onwe ha.

Isi mmalite, ọwa, bọs na mmepụta

Isi mmalite

Ntinye ọdịyo ọ bụla n'ime console ka a na-akpọ Isi Iyi. Ntinye nwere ike ịbụ mgbama analọgụ site na XLR ma ọ bụ 6.35 mm (¼”) njikọ TRS na azụ panel, ma ọ bụ akara dijitalụ site na S.tageConnect, USB, AES50, kaadị mgbasawanye arụnyere, wdg.
Isi mmalite WING gụnyere ozi ndị a:

Ịmata njirimara dị ka aha, agba, akara ngosi, na tags.
Njirimara anụ ahụ dị ka uru, ogbi, ntụgharị oge na ike phantom
Nhazi Mono/stereo/mid-akụkụ. Ọwa 40 niile dị na njikwa nwere ike hazie ma ọ bụ mono ma ọ bụ akara stereo. Enwere ike itinye akara ngosi stereo dijitalụ n'ime otu ọwa na njikwa. Lee isi nke 5 – ROUTING maka ozi ndị ọzọ.

Isi mmalite

WING na-egosipụtakwa akara ngosi onye ọrụ, Patches onye ọrụ na Oscillator enwere ike iji dị ka isi mmalite mpụga ọ bụla, mana ha bụ n'ezie akara ewepụtara site na ebe ndị ọzọ na igwe ọdịyo njikwa.

2 Oscillators

Enwere igwe na-emepụta ụda mono test abụọ nwere onwe ha nke enwere ike ịhazi maka sinewave, mkpọtụ pink ma ọ bụ mmepụta mkpọtụ ọcha. Enwere ike ibugharị ha na ọwa ma ọ bụ mmepụta ọ bụla.

24 akara ngosi

Ndị a bụ akara sitere na ọwa ntinye 40 ọ bụla, ọwa ntinye aux 8, ụgbọ ala 16, matrices 8 ma ọ bụ ụgbọ ala anọ. Enwere ike ịpị ha site na isi ihe mgbata tupu ma ọ bụ post-fader, ma buru ọwa aka ekpe ma ọ bụ aka nri, ma ọ bụ nchikota nke abụọ.

24 Patches onye ọrụ

Ndị a bụkwa akara ewepụtara ozugbo site na mgbama isi mmalite ọ bụla. Patches onye ọrụ na-enye gị ohere ịmepụta nchikota stereo nke akara ntinye nke na-abụghị nke otu Source Group. Ngwa enwere ike ịbụ:

Na-ejikọta akara abụọ sitere na interfaces Source Group dị iche iche n'ime nhazi stereo ma ọ bụ etiti akụkụ.
Na-ejikọta akara ndị na-adịghị n'akụkụ n'ime nhazi stereo ma ọ bụ n'etiti.
Tinye uru dị iche iche na ọwa ọ bụla nke nhazi stereo ma ọ bụ etiti akụkụ.
Tinye ike phantom naanị otu ọwa nke nhazi stereo ma ọ bụ etiti akụkụ.

Ọwa Ntinye Mono/Stereo 48

Ọwa ndị dị na WING RACK na-enye ohere maka nhazi ụda isi mmalite dị ike ma na-agbanwe agbanwe, tupu ịgwakọta ha na bọs ma ọ bụ ọdụ ụgbọ ala. Ọwa ntinye ọ bụla nwere ike ịnabata isi mmalite ma ọ bụ Nhọrọ ọzọ. Ha nwere ike ịnakwere njirimara nhazi nke isi mmalite wee jiri nhazi mono ma ọ bụ stereo Source na-akpaghị aka.
N'adịghị ka consoles ndị ọzọ, ọ dịghị mkpa ijikọ ọwa mono abụọ n'ime ụzọ stereo - ọwa niile nwere ike hazie akara mono ma ọ bụ stereo.
Enwere ike iziga ọdịyo ọwa na bọs ma ọ bụ mains maka ịgwakọta, ma ọ bụ enwere ike ịpị ya n'otu n'otu wee bufee ya na nsonaazụ ya ozugbo.

Ụgbọ ala stereo 16 na ụgbọ ala stereo anọ

A na-ejikarị ụgbọ ala iri na isii ahụ maka nhazi mmetụta site na izipu, nyochaa ngwakọta na itinye nhazi otu na ngwakọta ndị ọzọ. Enwere ike itinye ụgbọ ala n'ime bọs isi anọ, na bọs 16 mbụ ma ọ bụ na matrices 4. Enwere ike izipu bọs isi anọ ahụ na Matrices ma ọ bụ ebe ọpụpụ.

8 Ụgbọ ala Matrix

Ụgbọ ala Matrix nwere nhazi zuru oke ma enwere ike iziga ya na ebe ọ bụla ọpụpụ. A na-ejikarị ha eme ihe maka ngwakọta sub- ma ọ bụ mpaghara chọrọ nhazi ma ọ bụ nhazi oge. Enwere ike ịkwọ ụgbọ ala Matrix site na aux ma ọ bụ ụgbọ ala isi. Ha nwekwara ntinye ntinye aka abụọ ọzọ enwere ike iwere na ọwa ntinye ọ bụla, pịa tupu ma ọ bụ post-fader.
Enwere ike iji ụgbọ ala Matrix maka imepụta ụgbọ ala a na-akpọ Mix-Minus, site n'ịtụgharị oge ya bụ iwepụ ntinye aka ozugbo na ngwakọta ahụ. A na-etinyekarị nke a n'ọnọdụ mgbasa ozi mgbe onye nhazi kwesịrị ịnụ ihe niile ma olu nke ya na ngwakọta. Enwere ike ịnyeghachi ha na ọwa ntinye.

Nkọwa ngwaike

Ngalaba njikwa

WING RACK nwere ngalaba ahaziri ahazi maka ịnweta ogbi, solo na fader larịị njikwa nke ọwa niile. A na-enwetakwa otu ogbi, njikwa omenala na njikwa ụgbọ njem nke USB na WING-LIVE player na-enwetakwa ebe a.

INPUT/AUX

Pịa bọtịnụ ka ịgbanwee n'etiti ọkwa ndị a:

Ọwa ntinye 1-40.
Ọwa Aux 1-8.

A haziri ọwa ndị a n'ìgwè anọ nwere njikwa ọkwa ha, ogbi, na naanị otu ha.

Jiri ihe ndị ahụ gaa n'ọwa bọtịnụ. Ijide bọtịnụ ndị a ozugbo na-aga na ibe mbụ na nke ikpeazụ, n'otu n'otu. Ọnụ ọgụgụ peeji nke ugbu a na-egosi site na ihuenyo LED n'elu bọtịnụ.
Na ịpị VIEW bọtịnụ na-atụgharị n'etiti OVERVIEW na ihuenyo FADERS maka oyi akwa na-arụ ọrụ. Ijide ya ala na-emepe ihuenyo CONFIG ya.

Ụgbọ ala/ụlọ ọrụ

Pịa bọtịnụ ka ịgbanwee n'etiti ọkwa ndị a:

Ụgbọ ala 1-16.
Ụgbọ ala ndị isi 1-4 na matrices 1-8.

A na-ahazi ọkwa abụọ ahụ n'ìgwè nke ọwa anọ. Ụgbọ ala/matriks ọ bụla nwere ọkwa nke ya, ogbi, na njikwa solo.
Jiri ụgbọ ala / matrices gharịa ụgbọ ala bọtịnụ. Ijide bọtịnụ ndị a ala ozugbo na-aga na ibe mbụ na nke ikpeazụ, n'otu n'otu. A na-egosi nọmba peeji nke ugbu a site na ihuenyo LED dị n'elu na bọtịnụ.

DCA/MUTE

Pịa bọtịnụ ka ịgbanwee n'etiti ọkwa ndị a:

Otu DCA 1-16.
Mechie otu ndị ogbi.

A na-egosi ndị otu DCA n'ìgwè nke anọ na mpempe akwụkwọ nke nwere fader raara onwe ya nye (ekenye ya n'otu aka ahụ), njikwa ogbi na solo.
Jiri ndị ahụ gaa otu DCA bọtịnụ . Ijide bọtịnụ ndị a ala ozugbo na-aga na ibe mbụ na nke ikpeazụ, n'otu n'otu. Ọnụ ọgụgụ peeji nke ugbu a na-egosi site na ihuenyo LED n'elu bọtịnụ.
Mgbe oyi akwa otu ndị ogbi na-arụ ọrụ, a na-ekenye otu 1 ruo 8 na bọtịnụ 8 ndị ọzọ ejiri ya maka njikwa ogbi na naanị.

CUST/TỤRỤ

Pịa bọtịnụ ka ịgbanwee n'etiti ọkwa ndị a:

Njikwa omenala.
Njikwa mbufe ọkpụkpọ USB (mgbe etinyere draịva USB).
Njikwa njem WING-LIVE (mgbe etinyere kaadị SD).

Mgbe bọtịnụ njikwa omenala na-arụ ọrụ, pịa VIEW bọtịnụ mepere ibe iji dezie njikwa njikwa. Ị nwere ike kenye ọtụtụ parampat na 4 knobs na 8 bọtịnụ na ngalaba njikwa.

Njikọ USB

Njikọ ụdị USB-A na-enye ohere itinye draịva flash ozugbo na njikwa maka ịchekwa ma ọ bụ ibu data. Nke a na-enye gị ohere ịkwado ihe ngosi gị files ma ọ bụ buru ihe nhazi gị na-emebu na console WING agbaziri agbaziri.
Njikọ USB a na-enye ohere ịdekọ na ịkpọghachi nke ọwa abụọ ma ọ bụ anọ-WAV files. Ọdụ ụgbọ mmiri ahụ nwekwara ike chajịa obere ngwaọrụ dị ka ekwentị ma ọ bụ mbadamba. Enwere ike ịkwụsị draịva Flash jikọtara na ọdụ ụgbọ USB mgbe ọ bụla ọkụ ACCESS gbanyụrụ.

nlekota oru

Otu mkpịsị aka raara onwe ya nye na-achịkwa ọkwa mmepụta ekweisi nke ụgbọ ala MONITOR B (mpụta ekweisi) nke a chọtara na otu isi mmalite "Nleba anya" na ihuenyo ROUTING. A na-ahụ ntọala ngalaba nlekota ndị ọzọ na ibe SETUP>MONITORS.

Iji jiri njikọ ekweisi na console, a ga-ebugharị akara ngosi na nsonaazụ kwekọrọ 1/2, 3/4, 5/6 na 7/8. A na-eji akara ekweisi kpọpụta mpụta ndị a n'ibe ntinye akwụkwọ.
Ọ bụrụ na a na-eji ihe nleba anya dị nso, enwere ike nweta njikwa ụda anụ ahụ n'ụzọ abụọ:

Na-ebugharị ụgbọ ala MONITOR B (ekwe ntị) gaa na nsonaazụ anụ ahụ nke ejikọrọ ndị ọkà okwu.
Na-ekenye ihe nleba anya>SPEAKEERS n'otu mkpịsị aka na ihuenyo CUSTOM CONTROLS.

Akwughachi

Enwere ike ịhazi ọkwa igwe okwu okwu azụ, attenuation dim na ntọala nleba anya ndị ọzọ na ibe SETUP> MONITORS. Site na ịpị bọtịnụ TALKBACK>SETUP, enwere ike izipu akara okwu azụ na ebe dị iche iche.
Enwere ike iji ọwa 40 ma ọ bụ Aux 8 dị ka ọwa nhazi maka mgbama okwu azụ. Enwere ike itinye nhazi dịka achọrọ. Enwere ike ikenye ntinye ọ bụla na ọwa okwu azụ azụ ahọpụtara.

Isi ihe ngosi

The asaa bọtịnụ n'aka ekpe nke ngosi na VIEW bọtịnụ ndị dị na ngalaba isi ọ bụla nke elu panel na-enye ohere ịnweta ihuenyo ntọala dị iche iche. Nfefeview E gosipụtara ihuenyo ọ bụla n'Isi nke 5.
Nnukwu mita stereo ga-egosipụta ọkwa bọs isi ma ọ bụ naanị ụgbọ ala. Bọtịnụ CLR SOLO ga-ahapụ ọwa na ụgbọ ala niile na-arụ ọrụ na bọs solo.

Ogwe azụ

Analog I/O, MIDI na GPIO

Njikọ analọgụ azụ panel gụnyere 24 Midas PRO usoro igwe okwu tupuamps nwere njikọ jakị combo yana mpụta 8 XLR.
Enwere ike iji ekweisi stereo anọ maka nlekota. Iji kenye bọs na ntinye ndị a, gaa na ROUTING>OUTPUTS>MAPỤTA.
5-pin MIDI IN na OUT jakị na-enye ohere njikwa MIDI mpụga, yana otu ụzọ ¼” TRS jakị maka ihe ruru GPIO anọ na-enye ohere ntinye na iwu mmepụta.

ETHERNET/AES50/Control/StageConnect

Otu ụzọ ọdụ ụgbọ mmiri Ethernet na-enye ohere ka ịtọlite netwọọdụ site na rawụta maka njikwa wired ma ọ bụ ikuku site na iji otu ngwa njikwa na kọmpụta ma ọ bụ ngwaọrụ mkpanaka.
Enwere ike ijikọ njikwa ahụ na kọmpụta site na njikọ USB ụdị B maka ojiji ndị a:

48 ntinye/48 mmepụta ọdịyo interface. Enwere ike ibudata ọkwọ ụgbọ ala ASIO kwekọrọ na behringer.com.
Mmelite firmware.
Ngbanwe data.

3 AES50 ọdụ ụgbọ mmiri nke ọ bụla na-enye ihe ruru 48 ntinye na ọwa mmepụta gaa na site na s dijitalụtage igbe, na-ahụ na ọnụ ọgụgụ ọwa dị elu na ikwe ka patching gaa na site na ọtụtụ ebe. WING dakọtara nke ọma na igwekota usoro X32 na stage igbe.

Njikọ AES50 niile n'etiti WING na stagigbe e kwesịrị inwe:

Igwe CAT-5e echedoro.
Ethercon kwụsịrị eriri eriri.
Ogologo eriri kachasị elu nke mita 80.

StageConnect na-ebunye ihe ruru 32 dijitalụ ntinye ọdịyo ma ọ bụ ọwa mmepụta site na iji eriri XLR ziri ezi (110 Ω impedance DMX-cable akwadoro).
Ngwa ahụ na-akwado nhazi ụgbọ ala dị iche iche nke ọwa ntinye na mmepụta ma na-eji dijitalụ, PCM ọdịyo na-enweghị mkpakọ na 44.1/48 kHz na 24-bit mkpebi.
StagEmepụtara eConnect maka njikọ ndị na-agbanwe agbanwe na stage ma ọ bụ n'obere akụkụ, na-akwado ụdị ngwa dị iche iche na nkwụsị obere nkeji nkeji.
Enwere ike ime njikọ ntinye na stereo AES3 (AES/EBU) site na eriri XLR.

Oghere Mgbasawanye

WING console na-eji kaadị WING-LIVE arụnyere, nke na-enye ohere ka ịdekọ ihe ruru ọwa 64 nke 48 kHz / 32-bit na kaadị SD ma ọ bụ SDHC.
Enwere ike itinye kaadị ndị nwere protocol ndị ọzọ dị ka Dante, MADI na SoundGrid na oghere a.

Ike

Jikọọ eriri IEC gụnyere.

Isi ihuenyo

A na-eme ọtụtụ ndezi na njikwa dị elu na Ngosipụta Isi. Enwere ike ịnyagharịa ihuenyo site na bọtịnụ asaa dị n'aka ekpe nke ihuenyo ahụ, ma ọ bụ site na VIEW bọtịnụ na ngalaba nke ọ bụla nke elu panel.
Enwere ihuenyo isii enwere ike ịnweta site na bọtịnụ na-esote Ngosipụta Isi:

ỤLỌ
MMETỤTA
METERE
ROUTING
MELITE
Ụlọ akwụkwọ

Mara na bọtịnụ UILITY enweghị otu ihuenyo metụtara ya.
A na-egosipụta ogwe ọkwa n'elu ihuenyo iji nye ntụaka ngwa ngwa maka aha ọwa, elekere, na ọkwa. Nke a na-enyekwa ohere ịnweta njikwa kaadị SD mgbe niile, menu ntọala, ọrụ ọba akwụkwọ na ngwaọrụ ndị ọzọ.

ỤLỌ

Ihuenyo ahụ na-adaba na njedebeview nke ọwa ahọpụtara. Ihuenyo a na-enye ohere ịhazigharị ihe ndị bụ isi dị ka pan na ọkwa, mana na-enyekarị mmalite iji nweta ngọngọ nhazi dị mkpa dị ka EQ na ike.
Usoro nhazi nke ọnụ ụzọ ámá, dynamics, EQ, na fanye ngalaba, yana ebe mgbata maka mgbama ezigara na bọs 16 nwere ike gbanwee site na ịpị akara mgbanaka dị n'akụkụ aka ekpe nke ihuenyo Ụlọ na ịdọrọ. ihe mgbochi.

Ntinye

Ihuenyo INPUT na-egosi nke abụọ na kọlụm aka ekpe. Isi mmalite na nke ọzọ ekenyela ọwa ugbu a ka ahọpụtara ebe a. Enwere ike ịhazi akara ngosi dị ka mono, stereo ma ọ bụ etiti yana bọtịnụ M, ST na M/S kwekọrọ.

Ihuenyo FILTER bụkwa akụkụ nke ngalaba a, na-enye ohere ịkpụ dị ala, mbelata dị elu na nhọrọ nzacha dị elu dị ka nzacha tilt na nzacha ngafe niile maka nhazi oge.
N'ikpeazụ, DELAY (POST) na-achịkwa igbu oge etinyere na mgbaàmà mmepụta ọwa. Oge igbu oge a dị mkpa maka mgbama na-eme ka igwe okwu na-aga n'ihu na isi PA, dịka ọmụmaatụ.

ỌNỤ ỤZỌ

Ihuenyo GATE na-egosi nke atọ na kọlụm aka ekpe. Ihe mgbochi ahụ na-adaba na ọnụ ụzọ mkpọtụ dị mfe nke nwere oke nkịtị dị ka ọnụ ụzọ na oke, n'agbanyeghị na enwere ike ibunye ndị nrụpụta ndị ọzọ na menu Gate Model. Aha ngọngọ a ga-agbanwe iji gosipụta ụdị ahọpụtara.

Gbochie ndabara na ihe nhata parametric zuru oke maka ọwa ntinye, yana otu band 6 zuru oke maka ụgbọ ala. Enwere ike ịhọrọ ụdị dijitalụ dị iche iche na emulation nke ụdị analog EQ site na menu EQ Model.

Mgbanwe

Block na-enye nnukwu nhọrọ nke dijitalụ na emulation nke analog compressors, expanders na limiters.

PRE FADER tinye

N'ebe a, mmetụta dị n'ime ma ọ bụ mpụga sitere na otu oghere 16 FX nwere ike itinye n'ime ọwa. Enwere ike idowe ya n'ihu ma ọ bụ ka ọ gachara Ọnụ ụzọ ámá, EQ na/ma ọ bụ ngọngọ Dynamics.

Ntinye POST FADER

Ihe ntinye nke abụọ bụ nke edoziri post-fader na post-processing. Enwere ike iji ya gbakwunye nhazi FX, ma ọ bụ ijikwa ọkwa ọwa site na otu n'ime ìgwè abụọ na-agwakọta akpaaka na-etinye aka na-ekekọrịta uru na-akpaghị aka n'ofe ọwa ekenyere.

Isi

Ihuenyo na-enye ohere izipu ọkwa na nke ọ bụla n'ime bọs anọ bụ isi ka edozi ya yana obosara stereo, pan na ọkwa fader ọwa.

Ụgbọ ala na-eziga

Ihuenyo ikpeazụ dị na kọlụm aka ekpe na-enye ohere ịhazigharị ọkwa izipu na bọs iri na isii niile. Enwere ike ịtọ ebe mgbata maka izipu ọ bụla site na iji menu ndọda dị n'elu akuku aka ekpe, ma ọ bụ site na ịpị akara mkpisiaka dị na ihuenyo Ụlọ wee bugharịa Kpatụ. EQ nwere eriri atọ dị maka mgbama ezitere site na ebe mgbata na bọs iri na isii.
Ihuenyo HOME nwere ọdịdị yiri ya mgbe ahọpụtara ụgbọ ala, isi ma ọ bụ matrix, belụsọ enweghị mgbochi GATE dị na naanị mkpụbelata nwere ike idozi. Na ihuenyo INPUT, enwere ike ịtọ zipu ụgbọ ala ka ọ bụrụ pre fader (dị ka ntọala mgbata) ma ọ bụ post-fader ma ọ bụrụ na a ga-eji ha maka nleba anya ma ọ bụ mmetụta ezigara, ma ọ bụ na-esochi ma ọ bụrụ na a ga-ebugharị ọwa na bọs maka nkịtị. nhazi, tupu isi ngwakọta.

MMETỤTA

Ihuenyo EFFECTS na-achịkwa akụkụ niile nke ndị nrụpụta mmetụta. Ndị ọrụ nwere ike ịhọrọ site na nnukwu nchịkọta mebere emulation nke ndị na-arụ ọrụ analọgụ, hazie ụzọ ụzọ, gbanwee paramita na ọkwa nyocha.
Oghere PREMIUM FX asatọ nwere ike ịnabata ngwaọrụ ọ bụla (FX1-8, STD na ụdị CH). Oghere STANDARD FX nwere ike ịnabata ụdị mmetụta STD na CH.
Rịba ama na ngalaba CH nwere ngwaọrụ ọwa anọ na-ejikọta ngwaọrụ mmetụta atọ n'otu oghere, yana ngwa njikwa nke jikọtara anọ.
Enwere ike ịkwanye ihe ruru ngwaọrụ iri na isii na oghere dị na ihuenyo EFFECTS. Enwere ike ibunye ngwaọrụ ndị a ka ntinye ntinye. A na-ebufe ihe ngosi analog na mmetụta dijitalụ dị na ngalaba GATE, COMP na INS nke ọwa ọ bụla na ọwa ọ bụla ọ bụghị na oghere iri na isii nke ihuenyo EFFECTS.
A na-etinyekarị mmetụta na ọwa n'otu ụzọ abụọ: site na izipu ụgbọ ala ma ọ bụ site na ntinye ntinye. A na-ahazi mmetụta ndị dabere na oge dịka nkwughachi na igbu oge site na izipu ụgbọ ala, ebe a na-ahazi nhazi ike site na ntinye ntinye.

Mmetụta na izipu ụgbọ ala

Ka ịtọlite mmetụta site na izipu ụgbọ ala, họrọ ọwa nke a ga-agbakwunye mmetụta ahụ. Na ngalaba BUS SEND nke ihuenyo ụlọ, rụọ ọrụ izipu achọrọ site na iwepu ọwa achọrọ wee dozie fader dị iche iche na ngosipụta isi.
A na-eji ebe ntinye na ọwa na-anabata ụgbọ ala iji buo mmetụta achọrọ. Gbaa mbọ hụ na ebufere ọwa a na bọs isi. Site n'ịgbanwe ọnụọgụ nke mgbaama ezigara na bọs, enwere ike nweta ọnụọgụ mmetụta "mmiri" achọrọ maka ọwa ntinye ọ bụla.

Mmetụta dị ka ntinye ihe

Iji guzobe mmetụta site na ntinye ntinye, kpatụ otu n'ime ihe mgbochi INS dị na kọlụm aka ekpe nke ọwa ntinye achọrọ wee kenye ihe nrụpụta mmetụta nke ebuburu n'otu oghere 16 dị na ihuenyo EFFECTS.
Mgbe n'ihuenyo Ụlọ nke ọwa ntinye, ịpị akara ngosi mgbịrịgba ga-ekwe ka ọnọdụ nke ntinye ntinye mbụ yana GATE, COMP na EQ ngalaba site na ịdọrọ ihe mgbochi edo edo.

METERE

Ihuenyo METERS na-egosiputa mita larịị yana ọnọdụ dara ogbi maka ụzọ mgbama niile dị na njikwa. A na-achịkọta mita ọkwa n'otu aka ahụ: ọwa ntinye 40, ọwa aux 8, ụgbọ ala 16 ( inyeaka), 16 DCAs, bọs isi 4 na ụgbọ ala matrix 8. Ihuenyo a na-enyekwa ụzọ mkpirisi ngwa ngwa iji bugharịa n'ime otu ọwa ọ bụla dị n'elu maka njikwa ma ọ bụ dezie, site na imetụ ya aka.

ROUTING

WING na-enye ohere maka nhọrọ ntụgharị mgbanwe: enwere ike ibugharị isi iyi ọ bụla na ọwa ọ bụla ma ọ bụ mmepụta anụ ahụ. A na-ahazi patch nke isi mmalite na mpụta na ihuenyo ROUTING.
Enwere ike ịme otu ndezi ọzọ na ngalaba INPUT ọwa ọ bụla n'ime ihuenyo Ụlọ.

Ọwa

Bọtịnụ atọ dị n'akụkụ aka nri elu nke ihuenyo họrọ ọwa, ntinye anụ ahụ, ma ọ bụ mpụta maka edezi. Bọtịnụ nke mbụ na-achịkwa nhazi ọwa.
Nchịkọta nhọrọ "INPUT CHANNEL" na-achịkwa ma a ga-ahazi ntinye isi ma ọ bụ ntinye ọzọ nke ọwa ahụ. Nke a na-esote echiche nke njikwa inline, ebe otu ọwa nwere ike ịnwe ntinye abụọ na-adịgide adịgide ma gbanwee dịka mkpa onye ọrụ siri dị.
Tupu edezi, a ga-pịa akara ngosi mkpọghe. Mgbe ọkụ na-acha akwụkwọ ndụ akwụkwọ ndụ, edezi dị. Mgbe ọkụ na-acha uhie uhie, a na-egbochi ndezi.

Ọkara aka ekpe nke ihuenyo ga-egosipụta ọwa ntinye 40 na ụgbọ ala aux 8. Ọkara aka nri nke ihuenyo ga-egosipụta isi mmalite ndị dịnụ nwere ike ibuga na ọwa n'aka ekpe.
Mgbe ịpịchara ọwa achọrọ, enwere ike ịhọrọ isi iyi na-ebugharị ọwa ahụ na ọkara aka nri nke ihuenyo ahụ. Site na ịpị menu ndọpụta “SOURCE GROUP”, ị nwere ike họrọ n'etiti isi mmalite anụ ahụ ndị a na akụkụ azụ ma ọ bụ bọs nke njikwa:

MGBE N'ime: 24 igwe okwu anụ ahụ ma ọ bụ ntinye ahịrị.
AES/EBU N'ime: abụọ dijitalụ AES / EBU ntinye.
AES50A/AES50B/AES50C: ọdụ ụgbọ mmiri AES50 atọ.
USB AUDIO: enwere ike iji njikwa ahụ dị ka interface USB nwere ọwa ntinye na ntinye 48.
Kaadị EXP: ruo ntinye 64 dabere na kaadị mgbasawanye arụnyere.
MODULE: ruo ntinye 64 site na kaadị DANTE na SoundGrid dị.
BUS: nke ọ bụla n'ime ụgbọ ala iri na isii (stereo).
Isi: nke ọ bụla n'ime 4 isi ụgbọ ala (stereo).
MATRIX: nke ọ bụla n'ime bọs matrix 8 (stereo).
OSCILLATOR: mkpọtụ ọcha abụọ, mkpọtụ pink, ma ọ bụ oscillators sine.
STAGE jikọọ: Ọwa ọdịyo dijitalụ 32 na 48kHz na 24 bits site na njikọ XLR.
Ihe ọkpụkpọ USB: Ọwa 4 sitere na ihe ọkpụkpọ USB (Ụdị A ọdụ ụgbọ mmiri) n'ihu panel. Files ga-abụ nke enweghị mkpakọ .wav audio.
Akara ngosi onye ọrụ: akara nke enwere ike nweta site na isi ihe dị iche iche na mgbama nke ọwa ntinye, ụgbọ ala, bọs isi ma ọ bụ ụgbọ ala matriks, ma ọ bụ isi mmalite eweghachite site na nke ọ bụla n'ime patches 24 ndị ọrụ.

Mgbe ị na-akwachi ọtụtụ ọwa dị n'akụkụ, ịpị bọtịnụ "+1 AUTO" na-ahọrọ ọwa njikwa na-akpaghị aka maka ọrụ ntinye ngwa ngwa.

Ka ikpochapụ ntinye ọwa, pịa "Ọ BỤGHỊ".
Enwere ike ịhazi nhazi mono, stereo ma ọ bụ etiti nke ọwa ọ bụla site na bọtịnụ M, ST na M/S.

Isi mmalite

Mgbe ịpị bọtịnụ Isi mmalite, nhọrọ nhazi kpọmkwem maka isi mmalite ga-egosi. Enwere ike ịnweta otu isi mmalite niile site na menu ndọpụta dị n'elu ihuenyo ahụ.
Ọ ga-ekwe omume ịnyegharị isi iyi ahụ, hazie ya ka ọ bụrụ mono, stereo ma ọ bụ isi akụkụ etiti, mee ka ike phantom rụọ ọrụ (site na ijide bọtịnụ 48V), tụgharịa polarity, tinye akara ngosi, gbanwee agba isi, wee tinye otu ogbi. tags ka e wee mechie isi iyi mgbe otu ndị ogbi kwekọrọ na-arụ ọrụ. Enwere ike itinye akara ngosi agbakọtara na nhazi stereo ma ọ bụ etiti n'ime otu ọwa na njikwa.
Ọ bụrụ na akara ngosi anọghị n'akụkụ (maka example, MGBE NA 1 na 3) ma ọ bụ so na otu isi mmalite dị iche iche (maka example, Mpaghara IN 1 na AUX 1), enwere ike ịchịkọta ha site na iji

NDỤMỌDỤ NDỊ MMADỤ

A na-ahụ USER PATCHES n'otu isi mmalite USER SIGNAL wee kpọọ USR 25 ruo 48. Mgbe ịpịrịrị patch onye ọrụ, a na-ekenye akara ngosi etinyere na ya n'aka nri nke ihuenyo ahụ. Enwere ike ịhazi patches onye ọrụ ka mono, stereo ma ọ bụ etiti ma jiri ya mee ihe dị ka isi mmalite maka ọwa na njikwa.

Nsonaazụ

Mgbe ịpị bọtịnụ Mmepụta, nhọrọ ntụgharị maka ihe nrụpụta ga-egosi. Enwere ike ibugharị isi iyi ọ bụla na mmepụta ọ bụla.
Akụkụ aka ekpe nke ihuenyo ga-egosi nsonaazụ dijitalụ na analog dị. A na-enweta otu niile mmepụta site na menu ndọpụta dị n'elu ihuenyo ahụ.
Enwere ike ịhọrọ akara nke a ga-enye nri n'ime mmepụta ahọpụtara n'akụkụ aka nri nke ihuenyo ahụ. Enwere ike ịnweta otu isi mmalite niile site na menu ndọpụta dị n'elu ihuenyo ahụ.
Otu mmepụta WLIVE REC na RECORDER na-achịkwa ụzọ maka ịdekọ na kaadị SD abụọ ma ọ bụ na draịvụ USB jikọtara na panel ihu. Enwere ike ịdekọ ọwa 64 na kaadị SD (32 na kaadị ọ bụla) ma ọ bụ ọwa 4 na draịvụ USB. Enwere ike ịdekọ ọwa 48 na kọmputa ejikọrọ site na USB na azụ azụ.

MELITE

Izugbe

Akụkụ aka ekpe nke ihuenyo na-egosi aha njikwa nke enwere ike dezie, nọmba serial ya, ụdị firmware na kaadị mgbasawanye arụnyere.
USB MSD ACCESS na-ejikwa ọdịnaya ga-egosi mgbe ejikọrọ na kọmputa site na USB. Họrọ WING OS ka ibunye mmelite ngwanrọ na njikwa. Họrọ WING DATA iji jikwaa data ngosi ihe njikwa echekwara (egosi, snips, snaps, presets, clips). Ka Ikwupu console na kọmpụta ma ọ bụ ka ịlaghachi na nchigharị ọdịyo site na USB site na kọmpụta, wepụ ihe njikwa ahụ dịka eji draịvụ USB nkịtị eme mgbe niile.
Enwere ike ịtọ oge na ụbọchị na menu CLOCK.
A na-eji INIT CONSOLE tọgharịa ọwa console, aux, bọs, bọs isi, bọs matrix, isi mmalite, mpụta, DCA, otu ogbi na ntọala mmetụta. Enwere ike ịhọrọ ihe niile site na ịpị ihe niile. Enwere ike ịhọrọ ihe ndị akọwapụtara site na ịpị ha. Iji kpochapụ nhọrọ ahụ, pịa Ọ BỤGHỊ. A ga-emegharị ntọala ihe ndị ahọpụtara ka ị pịa INIT.
N'aka nke ọzọ, enwere ike ịtọgharịa njikwa ahụ site na ịpị ma jide bọtịnụ CLR SOLO na Ngosipụta Isi ka ị na-agbanye njikwa.

Audio

Ngalaba CLOCK AUDIO na-ejikwa sample ọnụego (CLOCK RATE) na okwu elekere (SYNC SOURCE) ntọala ntọala.
Site na ịpị ọwa na aux bus grid dị n'okpuru INPUT SELECT, ọ ga-ekwe omume ịgbanye ngwa ngwa n'etiti ntinye MAIN na ALT maka ọwa 40 niile na ụgbọ ala aux 8.
Mmasị nwere ọtụtụ ogbi na nhọrọ solo.
Enwere ike ịtọ solos dị iche iche dị ka pre (PFL) ma ọ bụ post fader (AFL).
USB AUDIO na-ahọrọ ọnụọgụ ọwa dị site na ụdị-B njikọ USB n'azụ panel site na ọwa 2 ruo 48.
AUTOMIX na-ahazi ọkwa nke ọtụtụ isi mmalite ka ọkwa mmepụta wee dịrị otu. Nke a bara uru na ọnọdụ ebe ndị ọkà okwu dị iche iche ga-ekwu okwu na stage n'otu oge ahụ, maka example. Ruo ọwa 16 nwere ike iji automix (na ntinye ntinye post) na otu abụọ (A/B).

Elu

Ihuenyo a nwere ọtụtụ nhọrọ gbasara ọkụ n'elu console, metering na ihe odide.

Ime ime

Enwere ike ijikwa ntọala njikwa ọtụtụ site na MIDI, site na DIN-5 ma ọ bụ njikọ USB. Akụkụ MIDI REMOTE CONTROL na-ekpebi oke a ga-achịkwa site na njikọ.
Ngalaba HA REMOTE na-ejikwa njikwa ime ihe njikwa site na ọdụ ụgbọ mmiri AES50 A, B na C.
Enwere ike ịtọ ọnọdụ IP na adreesị na ngalaba NETWORK.

DAW

Enwere ike iji WING console dị ka onye njikwa DAW. Nhazi nke otu dị na ihuenyo DAW. Enwere ike ibunye ihe nhazi maka DAW dị iche iche na-akpaghị aka site na menu ndọpụta.
Ka njikwa ahụ rụọ ọrụ dị ka onye njikwa DAW, a ga-pịa bọtịnụ REMOTE CONTROL n'aka ekpe nke njikwa omenala.

Ụlọ akwụkwọ

Ihuenyo LIBRARY bụ file njikwa maka ụdị mgbasa ozi dị iche iche gụnyere .wav audio files, snapshots, snippets, na mmetụta yana presets ọwa echekwara na nchekwa dị n'ime console ma ọ bụ na draịvụ USB ejikọrọ na panel ihu.

SNAP

A na-eji taabụ SNAP iji jikwaa snapshots na-echekwa ọwa console, aux, bọs, bọs isi, bọs matrix, isi mmalite, mpụta, DCA, otu ogbi na ntọala mmetụta.
Ọdịnaya enwere ike ịchekwa gụnyere nhazi ọwa, tags, patching, nzacha, oge igbu oge, channel strip settings, EQ, panning, sends, fader, ogbi na usoro nhazi na ọwa.
Bọtịnụ SAVE na-echekwa ntọala njikwa njikwa niile. SAVE+SCOPE na-enye onye ọrụ ohere ịhọrọ ọdịnaya akọwapụtara ka echekwara maka ọwa akọwapụtara. Ọ BỤGHỊ na bọtịnụ niile na-enye ohere ngwa ngwa nke ọdịnaya achọrọ.
A ga-echekwa foto ahụ ma ọ bụ na nchekwa dị n'ime console ma ọ bụ na draịvụ USB ejikọrọ na panel ihu, dabere na ebe ahọpụtara n'akụkụ aka ekpe elu nke ihuenyo ahụ.
Mgbe emechara mgbanwe na ntọala njikwa, enwere ike ịchekwa ndị a na foto dị adịbu site na ịpị foto achọrọ wee pịa Melite.
Ọ bụrụ na naanị ụfọdụ ọwa ma ọ bụ ọdịnaya kwesịrị imelite, pịa PARTIAL UPDATE ma họrọ ntọala achọrọ.
Iji buo foto nke nwere ma ọ bụ na-enweghị oke akọwapụtara, pịa LOAD. Ihe onyonyo ga na-echekwa paramita niile mana naanị cheta ndị akọwapụtara mgbe ejiri SAVE+SCOPE. Iji dezie SCOPE nke onyonyo dị adị, pịa Dezie SCOPE. Enwere ike ibunye ntọala akọwapụtara nke ọma site na foto onyonyo zuru oke yana bọtịnụ Ibu Ibu.

SNIP

Enwere ike iji snippets icheta mmezi ntọala ziri ezi dị ka mgbanwe nhazi nke dị na warara ọwa. Ka ịhọrọ ntọala ndị a ga-echekwa na snippet, pịa bọtịnụ REC wee jiri aka dozie ntọala achọrọ. A ga-egosipụta ọnụọgụ parampat gbanwetụrụ na ihuenyo. Jide n'aka na ị pịa Kwụsị mgbe emechara mgbanwe niile.
Ọ ga-ekwe omume ịgbakwunye ma ọ bụ wepụ parampat na snippet site na iji bọtịnụ Tinye ITEMS na wepụ ITEMS.

GLOBAL

Ọwa ọ bụla, ụgbọ ala, isi mmalite, mmepụta, DCA, otu ogbi ma ọ bụ mmetụta yana ọdịnaya ya nwere ike ichebe ka ị ghara ịfefe ya mgbe ị na-ebu snapshots ma ọ bụ snippets. Iji mee nke a, pịa bọtịnụ GLOBAL dị n'akụkụ aka nri elu nke ihuenyo wee kọwaa ihe a ga-echekwa. Mgbe ọ bụla echekwara ntọala, akara ngosi mkpọchi ga-acha uhie uhie.

CLIP

Ihe njikwa WING nwere ike ịkpọ .wav files site na mbụ depụtaghachiri site na kọmputa gaa na nchekwa dị n'ime site na njikọ USB WING DATA, draịvụ USB ejikọrọ na panel ihu ma ọ bụ .wav ndekọ nke console mere ma chekwaa ya na draịvụ USB ma ọ bụ na kaadị SD abụọ. azụ panel.
Enwere ike ịhọrọ obere ihe n'akụkụ aka ekpe wee kpọọ ya site na iji ogwe aka nri.

Mmetụta ndị etinyere na oghere 16 nke ihuenyo EFFECTS ga-egosi na ihuenyo FX. Enwere ike ịchekwa ma cheta ntọala nke oghere 16.

CHAN

Enwere ike ịchekwa ma cheta ọwa nke ọ bụla. A ga-echekwa ntọala ọwa niile mgbe ị na-eji njirimara a. Mgbe ebudatara, ọ bụ naanị nhazi ahọpụtara ka a ga-ebu.

Gosi

Enwere ike ịchịkọta foto, snippets, obere vidiyo, ntọala FX na nhazi ọwa ma chekwaa dị ka ihe ngosi. Iji mee nke a, gaa na taabụ SHOW wee pịa CREATE. Gaa n'ihe achọrọ na nchekwa dị n'ime ma ọ bụ flash mbanye, hụ na emeghe taabụ SHOW wee pịa bọtịnụ Tinye ITEM TO SHOW.
Pịa bọtịnụ Chekwaa na taabụ SHOW.
Enwere ike ịhazi ihe dị na ihe ngosi n'usoro akọwapụtara. A ga-egosi usoro ihe mgbe ahọpụtara akara ngosi ihe nkiri.
Enwere ike ịnyagharịa ihe ndị a site na iji bọtịnụ SHOW CNTRL dị na mpaghara etiti nke njikwa. PREV na Next họrọ ihe ndị ahụ. GO na-akpalite ihe ọ bụla. GO+PREV na
Gaa+Osote họrọ wee kpalite ihe ndị ahụ na-akpaghị aka.

Ịbara uru

Bọtịnụ a enweghị ihuenyo nke ya, kama ọ na-arụ ọrụ na njikọ ndị ọzọ. Ọrụ a bụ ihe gbara ya gburugburu, yabụ ịpị bọtịnụ UTILITY nwere ike iwelite nhọrọ ndị ọzọ ma ọ bụ ntọala maka nhazi, dabere na ihuenyo dị ugbu a.

Ndị na-edekọ/egwu egwuregwu kwụ ọtọ

Enwere ike ịnweta ihe ndekọ USB na SD na ndị egwuregwu ha kwekọrọ na akara ngosi dị n'elu ihe ngosi.

USB edekọ

Enwere ike ịdekọ ọwa 4 na draịva flash ejikọrọ na panel ihu. A na-ekenye akara ngosi na-enye ọwa anọ a site na otu mmepụta ihe ndekọ nke achọtara na ngalaba OUTPUTS nke ihuenyo ROUTING.

WING-LIVE SD ndekọ

Enwere ike ịdekọ ọwa 64 na kaadị SD abụọ na kaadị mgbasawanye WING-LIVE. A ga-edekọ ọwa 32 na kaadị ọ bụla. A na-ekenye akara ngosi na-enye ọwa ọ bụla site na otu mmepụta WLIVE REC na ngalaba OUTPUTS nke ihuenyo ROUTING.

Mmelite firmware

Enwere ike imelite ngwa ngwa WING console site na USB. Budata ngwa ngwa file site na ibe ngwaahịa na behringer.com ma soro usoro ndị a:

Mepee ibe SETUP/GENERAL wee mee ka OS ACCESS nwee ike.
Jikọọ eriri USB n'ọdụ ụgbọ mmiri azụ yana na kọmputa gị.
A mebere mbanye ga-apụta na kọmputa gị, dị ka ijikọ flash mbanye ma ọ bụ mbanye ike mpụga. Pịa mbanye ugboro abụọ ka imepe.
Dọrọ ngwa ngwa ọhụrụ ahụ file banye mbanye. Mara, ọ bụ ezie na WING ga-eji ngwa ngwa kachasị ọhụrụ na draịva ahụ buo, a na-atụ aro ka ihichapụ firmware ochie files ma ọ bụ bugharịa ha na nchekwa nchekwa.

Ọ bụrụ na njikwa anaghị ebuli nke ọma, ị ka nwere ike imelite firmware site na iji usoro a:

Ka agbanyụrụ njikwa, jikọọ eriri USB na ọdụ azụ azụ yana na kọmputa gị.
Pịa ma jide SETUP, wee gbanye console
Os na DATA mbanye ga-apụta na kọmpụta gị, dị ka ijikọ flash mbanye ma ọ bụ draịvụ ike mpụga. Pịa mbanye ugboro abụọ iji mepee.
Dọrọ ngwa ngwa ọhụrụ ahụ file n'ime OS mbanye.
- IHE: WING ga na-eji firmware kacha ọhụrụ na draịva ahụ na-akpụgharị mgbe niile.
Mgbe file ebufela, wepụ draịva mebere. Ngwa njikwa kwesịrị ịmalitegharị na akpaghị aka site na etinyere firmware ọhụrụ. Ọ bụrụ na ọ meghị, jiri aka gị jiri okirikiri mee ihe njikwa.

Ụzọ mkpirisi

Nzube	Banye MODE	Mmetụta	ỤZỌ ỌPỤPỤ
Gbanyụọ njikwa mmetụ isi ihe	Jide CLR SOLO, Nhazi, Utility	Egosipụtara obere X ma gbanyụọ ọrụ aka nke ihuenyo isi. Enwere ike iji òké USB maka njikwa GUI. A ga-ahazi ihe ngosi ahụ mgbe ịhapụ ọnọdụ ahụ.	Jide UILITY na CLR SOLO ruo mgbe X ga-apụ n'anya
	Jide SETUP na CLR SOLO maka> 1.5s	Na-emegharị panel mmetụ ahụ (nwere ike inye aka dozie nsogbu mmetụ mmụọ nwa oge ruo nwa oge)
Metụ UI> Nnwale Pịa mmụọ	Jide METERS na Ulo maka 5s ka ị na-eme ka njikwa na-ebuli elu
Kwado OS DRIVE na ụdị ule elu	Jide SETUP ka ị na-agbanye ọkụ	Ihe njikwa ahụ na-egosi dị ka draịva abụọ na kọmpụta ejikọtara ya, ya bụ WING OS maka igwe igwe na-arụ ọrụ firmware, yana WING DATA maka foto na obere vidiyo. files, wdg. Enwere ike ịnwale ọrụ ziri ezi nke njikwa elu niile.	Malitegharịa ekwentị console
Mechie wee malitegharịa	Jide EFFECT wee pịa HOME ka ibido Mechie site na ihuenyo Mbido	Console ga-emechi n'enweghị nsogbu wee malitegharịa na-akpaghị aka
Mkpọchi elu	Jide bọtịnụ ụlọ ala maka ~ 1.5s	Na-akpọchi elu console, ebe ọdịyo na njikwa ime na-arụ ọrụ na-enweghị mmetụta. Ngwakọta bọtịnụ ọ bụla (naanị ndị dị n'akụkụ ihuenyo mmetụ) nke ejidere mgbe ị na-etinye mkpọchi ga-echekwa ya dị ka "koodu passcode" maka imeghe. Ị ga-achọ ịpị otu ngwakọta nke bọtịnụ mgbe ị na-ewepụ Mkpọchi ahụ.	Jide bọtịnụ HOME maka ~ 1.5s ọzọ yana “koodu ngafe” nke bọtịnụ ndị apịara mgbe a na-akpọchichi, ma ọ bụ na-emegharị njikwa ahụ.
Bido njikwa njikwa (naanị nchekwa temp, enweghị foto ọ bụla wdg ga-ehichapụ)	Jide CLR SOLO ka ị na-ebuli njikwa njikwa	Otu dị ka iji INITIALIZE (site na ibe SETUP) mana tupu njikwa ahụ ebugo ọnọdụ echekwara (ọ bụrụ na ọ bụrụ na ọ bụrụ na ọ bụrụ na ọ bụrụ na ọ bụrụ na foto ikpeazụ ebugoro daa n'ụzọ ụfọdụ ihe njikwa na-eduga na loop buut)
Were nseta ihuenyo	Jide CLR SOLO wee pịa UILITY	Na-echekwa bmp nke ihuenyo dị ugbu a na draịvụ USB gị. A ga-ebu ụzọ mepụta folda akpọrọ 'screens' na mgbọrọgwụ nke draịvụ USB.
Gafere ibu mmalite akpaaka files	Jide ọba akwụkwọ mgbe ị na-ebuli njikwa njikwa	Anaghị ebu STARTUP.snap, STARTUP.snip na STARTUP*.snap files na ndekọ STARTUP n'oge buut
Na-ahazi ngwaike nhọrọ, ntụgharị AoIP modul maka Dante ma ọ bụ WSG	Jide UILITY maka 5s ka ị na-agbanye ọkụ	Mkparịta ụka nhazi na-enye ohere ịkọwapụta nhọrọ ngwaike

Nkọwapụta

Nhazi
Ọwa nhazi ntinye	Ọwa ntinye stereo 40, ọwa stereo aux 8
Ọwa nhazi mmepụta	16 ụgbọ ala stereo aux, stereo matrices 8, stereo mains 4
Igwe mmetụta nke ime (ezigbo stereo niile)	Oghere FX 8 adịchaghị, oghere FX 8 ọkọlọtọ
Matriks ntụgharị ntụaka ruo-atụ	500 x 502 mgbama
Nhazi mgbaàmà	Ebe na-ese n'elu 40-bit, 48 kHz
Ndị ntụgharị A/D (8-ọwa, 48 kHz, 24 bits)	114 dB ike nso*
Ndị ntụgharị D/A (stereo, 48 kHz, 24 bits)	120dB dyanmic nso *
I/O latency (ntinye njikwa na mmepụta)	1.0 ms
Latency netwọk (stage igbe dị na > console > stage igbe)	1.2 ms
Njikọ
Midas PRO usoro igwe okwu tupuampihe ọkụ (XLR)	24
Nsonaazụ dabara adaba nke XLR	8
Ntinye/mmepụta Aux (¼” TRS ziri ezi, mono)	N/A
Mbupute ekwentị (¼” TRS, stereo)	5
Ntinye / mmepụta Digital AES/EBU (XLR)	1/1
ọdụ ụgbọ mmiri AES50 (Klark Teknik SuperMAC, 100 Mbit/s)	3
interface kaadị mgbasawanye	Ntinye / mmepụta ọwa 64 x 64
StageConnect HOST(Master) I/O (ike enyere 12V/18W, XLR, ọwa 32)	1
Ntinye/mpụta MIDI	1/1
GPIO na TRS, nhazi	2 x2
Ngwa USB 2.0 ụdị B (48 x 48 ch 24-bit audio na MIDI I/O)	1
Ụdị USB 2.0 A ọbịa ( ọdịyo na data, 5 VDC, 1 A)	1
ọdụ ụgbọ mmiri Ethernet LAN, RJ45, 1 Gbit/s	2, gbanwere n'ime
Audio n'elu IP (AoIP) oghere modul ime (Dante, AES67 ma ọ bụ SoundGrid modul nhọrọ)	Ruo ọwa 64 x 64 @ 48 kHz
IEC mains soket nwere ike mgba ọkụ	1
Ntinye igwe okwu Njirimara (Mic Ntinye na Mmepụta Analog)
Nhazi	Usoro Midas PRO
THD+N (uru 0 dB, mmepụta 0 dBu)	<0.004%*
THD+N (+40 dB uru, 0 dBu ruo +20 dBu mmepụta)	<0.006%*
Ntinye ntinye (enweghị nha nha / nguzozi	1 kΩ / 2 kΩ
Ọkwa ntinye kacha na-abụghị clip	+ 21 dBu
Ike Phantom (enwere ike ịgbanwe kwa ntinye)	+48 V
Ụda ntinye aha nhata @ uru +45 dB (isi iyi 150 Ω)	-128 dBu*
CMRR @ uru ịdị n'otu (nke a na-ahụkarị)	> 50 dB
CMRR @ 40 dB uru (nke a na-ahụkarị)	> 70 dB
Ntinye/mmepụta Njirimara
Nzaghachi ugboro ugboro @ 48 kHz sample ọnụego, 0 ruo -1 dB (ntọala uru ọ bụla)	10 Hz - 20 kHz
Oke dị ike, analọgụ na analọgụ (nke a na-ahụkarị), XLR/aux	111dB* / 108dB*
A/D ike nso, tupuamplifier na ntụgharị (nke a na-ahụkarị), XLR / aux	112dB* / 110dB*
D/A ike nso, ntụgharị na mmepụta (ụdị), XLR/aux	118dB* / 112dB*
Ajụjụ Crosstalk @ 1 kHz, ọwa dị n'akụkụ	100 dB
Ọkwa mmepụta, njikọ XLR (ọnụ / kacha)	+4 dBu / +21 dBu
Mmebi nke mmepụta, njikọ XLR (enweghị nha nha / nguzozi)	75 Ω / 75 Ω
Ntinye ntinye, njikọ TRS (enweghị nha nha / nguzozi)	N/A
Ọkwa ntinye kacha na-abụghị clip, njikọ TRS	N/A
Ọkwa mmepụta Aux, TRS (ọnụ ọnụ / kacha)	N/A
Aux mmepụta impedance, TRS (enweghị nguzozi / nguzozi)	N/A
Mbupụta ekweisi / ọkwa kacha elu	500mW @ 75 Ω / +18 dBu
Ọkwa mkpọtụ ihe fọdụrụ, XLR si 1-16 njikọ, uru ịdị n'otu	-97 dBu*
Ọkwa mkpọtụ fọdụrụnụ, aux na nyochaa njikọ TRS	N/A

Nhazi
Ọwa nhazi ntinye	Ọwa ntinye stereo 40, ọwa stereo aux 8
Ọwa nhazi mmepụta	16 ụgbọ ala stereo aux, stereo matrices 8, stereo mains 4
Igwe mmetụta nke ime (ezigbo stereo niile)	Oghere FX 8 adịchaghị, oghere FX 8 ọkọlọtọ
Matriks ntụgharị ntụaka ruo-atụ	500 x 502 mgbama
Nhazi mgbaàmà	Ebe na-ese n'elu 40-bit, 48 kHz
Ndị ntụgharị A/D (8-ọwa, 48 kHz, 24 bits)	114 dB ike nso*
Ndị ntụgharị D/A (stereo, 48 kHz, 24 bits)	120dB dyanmic nso *
I/O latency (ntinye njikwa na mmepụta)	1.0 ms
Latency netwọk (stage igbe dị na > console > stage igbe)	1.2 ms
Njikọ
Midas PRO usoro igwe okwu tupuampihe ọkụ (XLR)	24
Nsonaazụ dabara adaba nke XLR	8
Ntinye/mmepụta Aux (¼” TRS ziri ezi, mono)	N/A
Mbupute ekwentị (¼” TRS, stereo)	5
Ntinye / mmepụta Digital AES/EBU (XLR)	1/1
ọdụ ụgbọ mmiri AES50 (Klark Teknik SuperMAC, 100 Mbit/s)	3
interface kaadị mgbasawanye	Ntinye / mmepụta ọwa 64 x 64
StageConnect HOST(Master) I/O (ike enyere 12V/18W, XLR, ọwa 32)	1
Ntinye/mpụta MIDI	1/1
GPIO na TRS, nhazi	2 x2
Ngwa USB 2.0 ụdị B (48 x 48 ch 24-bit audio na MIDI I/O)	1
Ụdị USB 2.0 A ọbịa ( ọdịyo na data, 5 VDC, 1 A)	1
ọdụ ụgbọ mmiri Ethernet LAN, RJ45, 1 Gbit/s	2, gbanwere n'ime
Audio n'elu IP (AoIP) oghere modul ime (Dante, AES67 ma ọ bụ SoundGrid modul nhọrọ)	Ruo ọwa 64 x 64 @ 48 kHz
IEC mains soket nwere ike mgba ọkụ	1
Ntinye igwe okwu Njirimara (Mic Ntinye na Mmepụta Analog)
Nhazi	Usoro Midas PRO
THD+N (uru 0 dB, mmepụta 0 dBu)	<0.004%*
THD+N (+40 dB uru, 0 dBu ruo +20 dBu mmepụta)	<0.006%*
Ntinye ntinye (enweghị nha nha / nguzozi	1 kΩ / 2 kΩ
Ọkwa ntinye kacha na-abụghị clip	+ 21 dBu
Ike Phantom (enwere ike ịgbanwe kwa ntinye)	+48 V
Ụda ntinye aha nhata @ uru +45 dB (isi iyi 150 Ω)	-128 dBu*
CMRR @ uru ịdị n'otu (nke a na-ahụkarị)	> 50 dB
CMRR @ 40 dB uru (nke a na-ahụkarị)	> 70 dB
Ntinye/mmepụta Njirimara
Nzaghachi ugboro ugboro @ 48 kHz sample ọnụego, 0 ruo -1 dB (ntọala uru ọ bụla)	10 Hz - 20 kHz
Oke dị ike, analọgụ na analọgụ (nke a na-ahụkarị), XLR/aux	111dB* / 108dB*
A/D ike nso, tupuamplifier na ntụgharị (nke a na-ahụkarị), XLR / aux	112dB* / 110dB*
D/A ike nso, ntụgharị na mmepụta (ụdị), XLR/aux	118dB* / 112dB*
Ajụjụ Crosstalk @ 1 kHz, ọwa dị n'akụkụ	100 dB
Ọkwa mmepụta, njikọ XLR (ọnụ / kacha)	+4 dBu / +21 dBu
Mmebi nke mmepụta, njikọ XLR (enweghị nha nha / nguzozi)	75 Ω / 75 Ω
Ntinye ntinye, njikọ TRS (enweghị nha nha / nguzozi)	N/A
Ọkwa ntinye kacha na-abụghị clip, njikọ TRS	N/A
Ọkwa mmepụta Aux, TRS (ọnụ ọnụ / kacha)	N/A
Aux mmepụta impedance, TRS (enweghị nguzozi / nguzozi)	N/A
Mbupụta ekweisi / ọkwa kacha elu	500mW @ 75 Ω / +18 dBu
Ọkwa mkpọtụ ihe fọdụrụ, XLR si 1-16 njikọ, uru ịdị n'otu	-97 dBu*
Ọkwa mkpọtụ fọdụrụnụ, aux na nyochaa njikọ TRS	N/A

*Mkpọtụ A-arọ na ọnụ ọgụgụ dị ike

Ozi ndị ọzọ

Ozi ndị ọzọ dị mkpa

Ozi dị mkpa

Debanye aha na ntanetị. Biko debanye aha akụrụngwa Egwu ọhụrụ gị ozugbo ịzụrụ ya site na ịga na musictribe.com. Ịdenye aha ịzụrụ ihe site na iji fọm ịntanetị dị mfe na-enyere anyị aka ịhazi nrụzi gị ngwa ngwa na nke ọma. Ọzọkwa, gụọ usoro na ọnọdụ nke akwụkwọ ikike anyị, ma ọ bụrụ na ọdabara.
Arụghị ọrụ. Ọ bụrụ na Reseller ikike ebo gị anọghị na mpaghara gị, ị nwere ike ịkpọtụrụ Music Tribe Authorized emezu maka obodo gị nke edepụtara n'okpuru "Nkwado" na musictribe.com. Ọ bụrụ na edepụtaghị obodo gị, biko lelee ma enwere ike idozi nsogbu gị site na "Nkwado Ọnlaịnụ" nke nwekwara ike ịchọta n'okpuru "Nkwado" na musictribe.com. N'aka nke ọzọ, biko nyefee akwụkwọ ikike n'ịntanetị na musictribe.com TUPU iweghachite ngwaahịa.
Njikọ ike. Tupu ịtinye unit ahụ n'ime oghere ọkụ, biko hụ na ị na-eji igwe igwe voltage n'ihi na gị akpan akpan nlereanya. Ekwesịrị iji fuses nke otu ụdị na ọkwa dochie fiusi na-ezighi ezi na-enweghị isi.

Nkwupụta FCC

Ozi nrube isi nke kọmishọna nzikọrịta ozi FEDERAL

Behringer
WING RACK

Aha Ndị Nnọchiteanya Egwuregwu Egwuregwu Egwuregwu NV Inc.
adreesị: 122 E. 42nd St.1, 8th Floor NY, NY 10168, United States
Adreesị ozi ịntanetị: legal@musictribe.com

WING RACK

A nwalere ngwa a wee hụ na ọ dabara na oke maka ngwaọrụ dijitalụ klaasị A, dịka akụkụ 15 nke Iwu FCC. Emebere oke ndị a iji nye nchebe ezi uche dị na ya pụọ na nnyonye anya na-emerụ emerụ mgbe ejiri akụrụngwa na mpaghara azụmahịa. Akụrụngwa a na-ewepụta, na-eji, ma nwee ike ịgbasa ike ugboro redio yana, ọ bụrụ na etinyeghị ya ma jiri ya dịka ntuziaka ntuziaka siri dị, nwere ike ibute ndabichi na-emerụ ahụ na nkwukọrịta redio. Ịrụ ngwá ọrụ a n'ime ebe obibi nwere ike ịkpata nnyonye anya na-emerụ ahụ ma ọ bụrụ na a ga-achọ ka onye ọrụ dozie nnyonye anya n'onwe ya.

Ngwa a na-akwado akụkụ 15 nke iwu FCC. A na-arụ ọrụ n'okpuru ọnọdụ abụọ a:

ngwaọrụ a nwere ike ọ gaghị ebute nnyonye anya na-emerụ ahụ.
Ngwaọrụ a ga-anabatarịrị nnyonye anya ọ bụla enwetara, gụnyere nnyonye anya nwere ike ibute ọrụ na-achọghị.

Ịdọ aka ná ntị

Ịrụ akụrụngwa a na gburugburu ebe obibi nwere ike ibute ndabichi redio.

Ozi dị mkpa:

Mgbanwe ma ọ bụ mgbanwe na ngwa ngwa nke Egwu Egwu anabataghị nke ọma nwere ike imebi ikike onye ọrụ iji ngwa ahụ.

Site na nke a, Music Tribe na-ekwupụta na ngwaahịa a dabara na ntuziaka 2014/35/EU, Ntuziaka 2014/30/EU, Ntuziaka 2011/65/EU na Ndozigharị 2015/863/EU, Ntuziaka 2012/19/EU, Iwu 519/ 2012 REACH SVHC na ntuziaka 1907/2006/EC.
Ederede zuru oke nke EU DoC dị na https://community.musictribe.com/

Ndị nnọchi anya EU: Egwu Tribe Brands DK A/S
adreesị: Gammel Strand 44, DK-1202 København K, Denmark
Onye nnọchi anya UK: Egwu Tribe Brands UK Ltd.
adreesị: Ụlọ nke asatọ, 8 Farringdon Street London EC20A 4AB, United Kingdom

Ntufu ngwaahịa a nke ọma: Akara ngosi a na-egosi na ekwesighi ikpofu ngwaahịa a na mkpofu ụlọ, dịka ntuziaka WEEE (2012/19/EU) na iwu obodo gị siri dị. Ekwesịrị ibuga ngwaahịa a n'ebe a na-anakọta ikike maka ịmegharị ngwa eletriki na ngwa eletrọnịkị (EEE). Ijikwa ụdị ihe mkpofu a na-ezighị ezi nwere ike inwe mmetụta na-adịghị mma na gburugburu ebe obibi na ahụike mmadụ n'ihi ihe ndị nwere ike ime ihe ize ndụ nke na-ejikọta ya na EEE. N'otu oge ahụ, imekọ ihe ọnụ gị n'ụzọ ziri ezi nke ngwaahịa a ga-enye aka n'iji ihe ndị sitere n'okike eme ihe nke ọma. Maka ozi ọzọ gbasara ebe ị nwere ike iburu akụrụngwa mkpofu gị maka imegharị ihe, biko kpọtụrụ ụlọ ọrụ obodo gị, ma ọ bụ ọrụ nnakọta mkpofu ụlọ gị.

Akwụkwọ / akụrụngwa

behringer Wing Rack [pdf] Ntuziaka onye ọrụ
Ọwa 48, 28 Bus Full Stereo Digital Mixing Engine nwere 24-Midas PRO Preamps, Mpụta 8 Midas PRO na ihuenyo mmetụ iri, Wing Rack, Rack

Ntụaka

Akwụkwọ ntuziaka onye ọrụ

behringer Wing Rack

Ntuziaka ojiji ngwaahịa

FAQ

Ntuziaka nchekwa dị mkpa

Okwu mmalite

Isi mmalite, ọwa, bọs na mmepụta

Nkọwa ngwaike

Ogwe azụ

Isi ihuenyo

Ndị na-edekọ/egwu egwuregwu kwụ ọtọ

Mmelite firmware

Ụzọ mkpirisi

Nkọwapụta

Ozi ndị ọzọ

Nkwupụta FCC

Akwụkwọ / akụrụngwa

Ntụaka

Hapụ ikwu

Kagbuo nzaghachi