B METERS ISMA-B-MIX18-IP Bacnet na ntuziaka nwụnye Modbus IO.

Nsonaazụ Analog: 4x 0-10 V DC mmepụta
Nsonaazụ dijitalụ: 4x relay mmepụta
Ihuenyo: RS485 ọkara-duplex, Modbus ma ọ bụ BACnet, Ethernet, Modbus TCP/IP ma ọ bụ BACnet IP
Baudrate: Tọọ site na ngbanwe dị nso site na 2400 ruo 115200 bps

Ogo nchedo mbata: IP40 - maka nrụnye ime ụlọ
Okpomọkụ: 5 ruo 95% RH (na-enweghị condensation)
Akụkụ Njikọ: 88x110x62 mm (3.46 × 4.33 × 2.44 inch)
Ịkwanye: DIN okporo ígwè arịọnụ (DIN EN 50022 norm)
Ihe eji eme ụlọ: Plastic, PC/ABS na-ekpochapụ onwe ya

Nkọwapụta

Ịnye ọkụ	DC: 24 V ± 20%, 4.4 W; AC: 24 V ± 20%, 6.6 VA
Ntinye zuru ụwa ọnụ	5 x voltage, nha ugbu a na nguzogide, kọntaktị akọrọ
Ntinye dijitalụ	Ntinye kọntaktị 5x akọrọ, counter pulse dị elu ruo 100 Hz
Ihe nrụpụta analog	4x 0-10 V DC mmepụta, kacha ibu ruo 20 mA kwa ọwa, Ibu mkpokọta 60mA kachasị maka ntinye analọgụ
Nsonaazụ dijitalụ	4x relay mmepụta	Ogo kacha	UL kwadoro ogo
	Ibu na-eguzogide max.	3 A @ 230 V AC 3 A @ 30V DC	3 A @ 24 V AC 3 A @ 30V DC
	Ibu inductive max.	75 VA @ 230 V AC 30W @ 30 V DC	8 VA @ 24 V AC 30W @ 30 V DC
Interface	RS485 ọkara duplex, Modbus ma ọ bụ BACnet, ruo ngwaọrụ 128 na ụgbọ ala, Ethernet, Modbus TCP/IP ma ọ bụ BACnet IP
Adreesị	Tọọ site na ngbanwe dị na nso 0 ruo 99
Mechie iwu	Tọọ site na ngbanwe dị nso site na 2400 ruo 115200 bps
Ogo nchedo mbata	IP40 - maka nrụnye ime ụlọ
Okpomọkụ	Na-arụ ọrụ: -10°C ruo +50°C (14°F ruo 122°F) Nchekwa: -40°C ruo +85°C (-40°F ruo 185°F)
Iru mmiri dị ala	5 ruo 95% RH (na-enweghị condensation)
Njikọ	Nkewa, max 2.5 mm2 (18 - 12 AWG)
Akụkụ	88x110x62 mm (3.46 × 4.33 × 2.44 inch)
Ịkwanye	DIN okporo ígwè arịọnụ (DIN EN 50022 norm)
Ihe eji eme ụlọ	Plastic, PC/ABS na-ekpochapụ onwe ya

Ogwe dị elu

Ntinye nke Uniltal / Digital

Mpụta dijitalụ/MKỤKỌRỤ / IKE

Mpụta Analogs

Ịdọ aka ná ntị

Mara, wiwi ngwaahịa a na-ezighi ezi nwere ike imebi ya wee bute ihe egwu ndị ọzọ. Gbaa mbọ hụ na etinyela ngwaahịa a nke ọma tupu ịgbanwuo ike.
Tupu wiring, ma ọ bụ wepụ/ịkwalite ngwaahịa, jide n'aka na ị gbanyụọ ike. Emeghị nke a nwere ike ịkpata ujo eletrik.

Emetụkwala akụkụ ndị chajụrụ ọkụ dị ka ọdụ ọkụ. Ime otú ahụ nwere ike ịkpata ujo eletrik.
Ewepụla ngwaahịa a. Ime otú ahụ nwere ike ịkpata ujo eletrik ma ọ bụ arụrụ arụrụ arụ.

Jiri ngwaahịa n'ime oke ọrụ akwadoro na nkọwapụta (okpomọkụ, iru mmiri, voltage, ujo, mgbago ntụzịaka, ikuku wdg). Emeghị nke a nwere ike bute ọkụ ma ọ bụ arụrụ ọrụ adịghị mma.
Mee ka waya ndị ahụ sie ike na njedebe. Enweghi ike imechi wires na njedebe nwere ike ibute ọkụ.

Nkwụsị ngwaọrụ

Ndị na-emegide RS485 BIASING

AKWỤKWỌ IKE NA-EKWU

Nchekwa ọkụ eletrik na akpaaka ụlọ na sistemu njikwa na-adabere n'ụzọ bụ isi n'iji obere volttage nke e kewapụrụ nke ọma na isi voltage. Nke a obere voltage bụ ma SELV ma ọ bụ PELV dị ka EN 60730-1.
A na-echekwa nchebe megide ujo eletrik site na usoro ndị a:
- mmachi nke voltage (obere voltage AC / DC 24V ọkọnọ, ma SELV ma ọ bụ PELV)
- Nchedo nkewa nke usoro SELV site na sekit niile na-abụghị SELV na PELV
- nkewa dị mfe nke usoro SELV site na usoro SELV ndị ọzọ, site na usoro PELV na ụwa
Ngwa mpaghara dị ka sensọ, kọntaktị ọkwa, na ndị na-eme ihe ejikọrọ na obere voltatagntinye na ntinye nke modul I/O ga-agbaso ihe achọrọ maka SELV ma ọ bụ PELV. Oghere nke ngwaọrụ ubi na sistemụ ndị ọzọ ga-emezurịrị ihe SELV ma ọ bụ PELV chọrọ.

Mgbe enwetara sekit SELV ma ọ bụ PELV site na isi iyi nke voltaji dị elutages a ga-enye ya site na nchekwa nchekwa ma ọ bụ ihe ntụgharị emebere maka ịrụ ọrụ na-aga n'ihu iji nye sekit SELV ma ọ bụ PELV.

FCC

Ndeba nrube isi nke FCC

Mara: A nwalere ngwa a wee hụ na ọ dabara na oke maka ngwaọrụ dijitalụ Klas B, n'okpuru akụkụ 15 nke Iwu FCC. Emebere oke ndị a iji nye nchebe ezi uche dị na ya megide nnyonye anya na-emerụ emerụ na ntinye ụlọ. Akụrụngwa a na-ebute, na-eji, ma nwee ike ịgbasa ike ugboro redio na, ọ bụrụ na etinyeghị ya ma jiri ya mee ihe, nwere ike ịkpata nnyonye anya na-emerụ ahụ na nkwukọrịta redio. Agbanyeghị, enweghị nkwa na nnyonye anya agaghị eme na otu nrụnye. Ọ bụrụ na akụrụngwa a na-ebute nnyonye anya na-emerụ ahụ na nnabata redio ma ọ bụ telivishọn, nke enwere ike ikpebi site na ịgbanyụ ma gbanye akụrụngwa, a na-agba onye ọrụ ume ka ọ nwaa idozi nnyonye anya site na otu ma ọ bụ karịa n'ime usoro ndị a:

Megharịa ma ọ bụ bugharịa antenna nnata.
Mee ka nkewa dị n'etiti akụrụngwa na onye nnata.
Jikọọ akụrụngwa na ntinye na sekit dị iche na nke ejikọrọ onye nnata.
Kpọtụrụ onye na-ere ahịa ma ọ bụ onye ọrụ redio/TV nwere ahụmahụ maka enyemaka.

WIRING

A ga-emerịrị eriri ike ahịrị site na nkewa oghere na mgbama na eriri nnyefe data.
Ekwesịrị ịkewakwa eriri mgbama analog na dijitalụ.
A na-atụ aro ka iji eriri mkpuchi maka akara analog, ọta eriri ekwesịghị ịkwụsị site na njedebe etiti.

Ekwesịrị ka a na-ekpuchi mkpuchi ahụ ozugbo mgbe eriri ahụ banyere n'ime ụlọ.
A na-atụ aro ka ịwụnye ihe mgbochi nnyonye anya mgbe ị na-agbanwe ibu inductive (dịka coils nke contactors, relays, valves solenoid). RC snubbers ma ọ bụ varistors dabara maka AC voltage na diodes freewheeling maka DC voltage ibu. Ekwesịrị ijikọ ihe ndị na-egbochi ike ka ọ dị nso na eriri igwe dị ka o kwere mee.

Ịwụnye

Biko gụọ ntuziaka ahụ tupu ejie ma ọ bụ rụọ ọrụ ngwaọrụ. Ọ bụrụ n'ajụjụ ọ bụla mgbe ị gụchara akwụkwọ a, biko kpọtụrụ ndị otu nkwado iSMA CONTROLLI
(support@ismacontrolli.com).

Ịdọ aka ná ntị

Tupu izipu ma ọ bụ wepụ/ịkwalite ngwaahịa ahụ, hụ na ịgbanyụ ọkụ. Emeghị nke a nwere ike ibute ujo eletrik.

Ngwa wiwi na-ezighi ezi nwere ike imebi ya wee bute ihe egwu ndị ọzọ. Jide n'aka na etinyela ngwaahịa a nke ọma tupu ịgbanye ọkụ.
Emetụkwala akụkụ ndị chajụrụ ọkụ dịka ọdụ ọkụ. Ime otú ahụ nwere ike ịkpata ujo eletrik.

Ewepụla ngwaahịa a. Ime otú ahụ nwere ike ịkpata ujo eletrik ma ọ bụ arụrụ ọrụ adịghị mma.
Jiri ngwaahịa naanị n'ime oke ọrụ akwadoro na nkọwapụta (okpomọkụ, iru mmiri, voltage, ujo, ụzọ mgbago elu, ikuku, wdg). Emeghị nke a nwere ike bute ọkụ ma ọ bụ arụrụ ọrụ adịghị mma.

Mee ka waya ndị ahụ sie ike na njedebe. Emeghị nke a nwere ike bute ọkụ.
Zere ịtinye ngwaahịa na nso ngwaọrụ eletriki na eriri igwe nwere ike dị elu, ibu na-emepụta ihe na ngwaọrụ mgbanwe. Ịdị nso nke ihe ndị dị otú ahụ nwere ike ịkpata nnyonye anya na-achịkwaghị achịkwa, na-ebute ọrụ ngwa ngwa nke ngwaahịa ahụ.

Nhazi nke ọma nke ike na mgbama ọkụ na-emetụta ọrụ nke usoro nchịkwa dum. Zere idowe ike na wiwi mgbama n'ime traị USB yiri ya. Ọ nwere ike ibute ndabichi na akara ngosi na njikwa.
A na-atụ aro ka ndị na-ahụ maka ọkụ / modul nwere ndị na-eweta ọkụ AC / DC. Ha na-enye mkpuchi ka mma ma kwụsie ike maka ngwaọrụ ma e jiri ya tụnyere sistemụ ntụgharị AC/AC, nke na-ebunye ọgbaghara na ihe na-adịghị adịte aka dị ka mgbawa na ịgbawa na ngwaọrụ. Ha na-ekewapụkwa ngwaahịa site na ihe ndị na-emepụta ihe na ihe ntụgharị na ibu ndị ọzọ.
Ekwesịrị ichekwa sistemu ọkụ ọkụ maka ngwaahịa site na ngwaọrụ mpụga na-egbochi oke oketage na mmetụta nke àmụmà na-agbapụta.
Zere ịgbanye ngwaahịa na ngwaọrụ a na-achịkwa/nyocha, ọkachasị ike dị elu na ibu inductive, site na otu isi iyi ike. Ịkwanye ngwaọrụ sitere na otu isi iyi ọkụ na-ebute ihe egwu nke iwebata ọgbaghara sitere na ibu na ngwaọrụ njikwa.
Ọ bụrụ na a na-eji ihe ntụgharị AC/AC na-ebunye ngwaọrụ njikwa, a na-atụ aro ka ị jiri ihe ntụgharị 100 VA Class 2 kacha elu iji zere mmetụta inductive na-achọghị, nke dị ize ndụ maka ngwaọrụ.
Ogologo nleba anya na ahịrị njikwa nwere ike ịkpata loops na njikọ ọkụ ọkụ nkekọrịta, na-ebute ọgba aghara na ọrụ nke ngwaọrụ, gụnyere nzikọrịta ozi mpụga. A na-atụ aro ka iji galvanic separators.
Iji kpuchido mgbama na ahịrị nzikọrịta ozi megide nnyonye anya elektrọnik dị n'èzí, jiri eriri echedoro nke ọma na bead ferrite.
Ịgbanwegharị relays mmepụta dijitalụ nke nnukwu ibu (karịrị nkọwapụta) nwere ike ime ka nnyonye anya na ngwa eletrọnịkị arụnyere n'ime ngwaahịa a. Ya mere, a na-atụ aro ka iji relays / kọntaktị ndị ọzọ, wdg iji gbanwee ibu dị otú ahụ. Ojiji nke njikwa nwere mpụta triac na-amachikwa oke oketage phenomena.
Ọtụtụ ọnọdụ nke ọgbaghara na oke oketage na sistemu njikwa na-emepụta site na mgba ọkụ, ibu inductive na-eweta site na ọzọ mains vol.tage (AC 120/230 V). Ọ bụrụ na ha enweghị sekit mbelata mkpọtụ arụnyere n'ime ya kwesịrị ekwesị, a na-atụ aro ka iji sekit dị n'èzí dị ka snubbers, varistors, ma ọ bụ diode nchebe iji gbochie mmetụta ndị a.

Ịdọ aka ná ntị: Ekwesịrị ime ntinye ọkụ eletrik nke ngwaahịa a dịka koodu wiring nke mba si dị ma kwekọọ n'ụkpụrụ mpaghara.

B METERS UK | www.bmetersuk.com | iSMA

FAQ

Ajụjụ: Gịnị ka m ga-eme ma ọ bụrụ na enwere m ajụjụ mgbe m gụsịrị akwụkwọ ntuziaka?
- A: Kpọtụrụ ndị otu nkwado iSMA CONTROLLI na support@ismacontrolli.com maka enyemaka.
Ajụjụ: Kedu ka m ga-esi edozi wiring maka ngwaọrụ ahụ?
- A: Gbaa mbọ hụ na ị na-eji ihe mmechi kwesịrị ekwesị dị ka snubbers ma ọ bụ varistors maka AC voltage na diodes freewheeling maka DC voltage ibu. Jikọọ ihe ndị a nso na eriri igwe maka ịrụ ọrụ dị irè.

Akwụkwọ / akụrụngwa

B METERS ISMA-B-MIX18-IP Bacnet na Modbus IO Module [pdf] Ntuziaka nwụnye
ISMA-B-MIX18-IP, ISMA-B-MIX18-IP Bacnet na Modbus IO Module, Bacnet na Modbus IO Module, Modbus IO Module, IO Module, Module

Ntụaka

Akwụkwọ ntuziaka onye ọrụ

B METERS ISMA-B-MIX18-IP Bacnet na Modbus IO Module