KING LPWV2715-CT24 Vandal Resistant Heater Instruction Manual

1. Ngwaahịa gafereview

The KING LPWV2715-CT24 is a robust, vandal-resistant electric heater designed for high-traffic and public areas such as detention facilities, public restrooms, and rest areas. Its heavy-duty construction, including a 3/16-inch solid steel frame and grill, provides exceptional durability against impact and abuse. Tamper-resistant screws secure the grill, and controls are recessed to prevent unauthorized access. This unit offers moderate wattage and high airflow to effectively heat entryways and hallways, preventing drafts from affecting the building's core temperature.

Foto 1: N'ihu view of the KING LPWV2715-CT24 Vandal Resistant Heater, showcasing its robust metal casing and grill.

Akụkụ ndị bụ isi:

• Impact/Vandal Resistant: Constructed with a heavy grill and 3/16-inch solid steel frame.
• Pic-A-Watt Elements: Allows for multiple wattage options to suit specific heating requirements.
• Tamper Resistant 3 Position Switch: Offers Fan, Heat, and Off settings, designed to prevent unauthorized adjustments.
• Nchekwa oke ọkụ: Integrated safety feature to prevent overheating.

2. Ozi nchekwa

Read all instructions carefully before installing or using this heater. Failure to follow these instructions may result in electric shock, fire, property damage, or personal injury.

• Nwụnye ọkụ eletrik: This heater operates on 277 Volts and requires hardwiring. Installation must be performed by a qualified electrician in accordance with all national and local electrical codes.
• Nda ala: This heater must be properly grounded to reduce the risk of electric shock.
• Ebe: Do not install the heater in areas where gasoline, paint, or other flammable liquids are stored or used. Maintain proper clearances from combustible materials as specified in the installation section.
• Nchekwa oke ọkụ: The heater is equipped with a thermal cut-out to prevent overheating. If the heater shuts off due to overheating, allow it to cool down before attempting to restart. Investigate and correct the cause of overheating.
• Ekpuchila: Never cover the heater or block its air inlets/outlets. This can cause overheating and fire.
• Nlekọta: Kwupu ike tupu ime mmezi ma ọ bụ ihicha ọ bụla.

3. Ihe ngwugwu

Nyochaa na akụrụngwa niile dị na adịghị emebi emebi mgbe imepe ngwugwu:

• KING LPWV2715-CT24 Vandal Resistant Heater Unit
• Mounting Hardware (typically included)
• Akwụkwọ ntuziaka (akwụkwọ a)

Ọ bụrụ na ihe ọ bụla efuo ma ọ bụ mebie, kpọtụrụ onye na-ebunye gị ngwa ngwa.

4. Nwụnye

Ịdọ aka ná ntị: Installation must be performed by a qualified electrician. Disconnect all power to the circuit at the main service panel before attempting any wiring.

4.1 Ebe nrịgo

• This heater is designed for indoor, wall-mount installation.
• Choose a location that allows for proper air circulation and maintains required clearances from walls, ceilings, and floors. Refer to local codes for specific clearance requirements.
• Ensure the mounting surface is structurally sound to support the heater's weight (approximately 36 pounds).

4.2 Njikọ eletrik

• The LPWV2715-CT24 heater requires a dedicated 277 Volt, 60 Hz, single-phase circuit.
• Igwe ọkụ na-adọta 5.4 Amps at 277V, providing 1500 Watts of heat. Ensure the circuit breaker and wiring are appropriately sized for this load.
• Connect the heater directly to the electrical supply using appropriate hardwiring methods and connectors, following the wiring diagram provided inside the heater's access panel.
• Gbaa mbọ hụ na njikọ niile siri ike na nchekwa.

5. Ọrụ

Once properly installed and powered, the heater can be operated using its tamper-resistant 3-position switch.

5.1 Ntọala ngbanwe ọkụ

• Gbanyụọ: The heater is completely off, and no heat or fan operation will occur.
• Fan: The fan operates continuously without engaging the heating elements. This can be used for air circulation.
• Ọkụ: The heating elements and fan operate to provide warmth. The heater will cycle on and off to maintain the desired temperature if connected to an external thermostat (not included).

5.2 Wattage Selection (Pic-A-Watt)

The LPWV series heaters feature Pic-A-Watt elements, allowing for field-adjustable wattage settings. Refer to the wiring diagram inside the heater for instructions on how to adjust the wattage to suit specific room requirements. This adjustment should only be performed by a qualified technician with power disconnected.

6. Nlekọta

Regular maintenance ensures optimal performance and longevity of your heater. Always disconnect power at the circuit breaker before performing any maintenance.

• Nhicha: Kwa oge na-ehicha mpụta nke ikpo ọkụ na nro, damp akwa . Ejila ihe nchacha abrasive ma ọ bụ ihe mgbaze.
• Air Inlets/Outlets: Ensure that the air inlets and outlets are free from dust, lint, and other obstructions. Use a vacuum cleaner with a brush attachment to gently clean the grill and internal components if accessible.
• Nyocha: Annually inspect the heater for any signs of damage, loose wiring, or unusual wear. If any issues are found, contact a qualified electrician for repair.

7. Nchọpụta nsogbu

Tupu ịkpọtụrụ nkwado ndị ahịa, regharịaview nsogbu na azịza ndị a na-ahụkarị:

If the problem persists after attempting these solutions, contact customer support or a qualified electrician.

8. Nkọwapụta

9. Akwụkwọ ikike na nkwado

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official KING websaịtị. Debe nnata nzụta gị dị ka ihe akaebe nke ịzụrụ maka nkwupụta ikike.

Onye nrụpụta: KING Electrical Manufacturing

Websaịtị: www.king-electric.com (Ọpụampnjikọ a, biko lelee nke gọọmentị websaịtị)