HumsiENK 12V 320Ah LiFePO4 Lithium Battery Instruction Manual

1. Okwu mmalite

This manual provides essential information for the safe and efficient operation of your HumsiENK 12V 320Ah LiFePO4 Lithium Battery. Please read it thoroughly before installation and use.

2. Atụmatụ igodo

• Ogologo okirikiri ndụ: Over 6000 deep cycles at 80% DOD, equivalent to 10+ years of service.
• Bluetooth 5.0 Smart Monitoring: Real-time monitoring of voltage, current, capacity, and temperature via the HumsiENK App (iOS/Android) within an 8-meter range.
• Upgraded 250A BMS: Protects against overcharging, over-discharging, overload, short circuits, and extreme temperatures. Features 300A peak discharge current.
• Nchekwa okpomọkụ dị ala: Discharges normally down to -4°F (-20°C). Automatically cuts off charging below 32°F (0°C) to prevent cell damage.
• High Capacity & Easy Installation: 320Ah capacity, 4096Wh energy. Weighs 59.75 lbs with standard M8 terminals.
• Fast Charge & Expandability: Supports 1C charge rate (6.4 hours for full charge). 4S4P design allows expansion up to 51.2V 1280Ah (65.5kWh).
• Ogo IP65: Ensures reliable protection against dust and water ingress.

3. Ozi nchekwa

WARNING: Failure to follow these safety instructions may result in fire, electric shock, injury, or damage to the battery and other property.

• Adịla mkpụmkpụ-okirikiri nke nti na adịghị mma ọnụ.
• Atụba batrị n'ime ọkụ ma ọ bụ mmiri.
• Do not modify or disassemble the battery without authorization.
• Use only a LiFePO4 battery charger with an activation function that matches the output voltage of the lithium battery.
• Ensure all screws are properly tightened when connecting batteries.
• Avoid immersing the battery in any liquid.
• Debe ebe ụmụaka na-apụghị iru.
• Do not touch uninsulated terminals or connectors.
• No sparks, no flames, no smoking near the battery.

4. Kedu ihe dị na Igbe ahụ

• HumsiENK 12V 320Ah LiFePO4 Lithium Battery (2 Pack)
• Akwụkwọ ntuziaka onye ọrụ
• Battery Bolt Caps
• M8 Terminals

5. Ntọala na nwụnye

5.1 Nwụnye anụ ahụ

• Ensure the installation area is clean, dry, and well-ventilated.
• The battery weighs 59.75 lbs. Use proper lifting techniques or assistance to avoid injury.
• Connect cables to the M8 terminals, ensuring correct polarity (red for positive, black for negative). Tighten all connections securely to prevent arcing and overheating.
• The battery's dimensions are approximately 20.49 x 9.34 x 8.69 inches (52.04 x 23.73 x 22.07 cm). Ensure adequate space for installation and ventilation.

5.2 Bluetooth App Setup

• Download the "HumsiENK App" from your device's app store (available for iOS and Android).
• Kwado Bluetooth na ama ma ọ bụ mbadamba gị.
• Open the HumsiENK App and follow the on-screen instructions to connect to your battery. The app allows real-time monitoring of voltage, current, capacity, and temperature.

6. Ntuziaka ọrụ

6.1 Ịchaji

• The battery supports charging from battery chargers, solar panels, and generators.
• A 1C charge rate allows for a full recharge in approximately 6.4 hours.
• The BMS automatically cuts off charging if the battery temperature drops below 32°F (0°C) to prevent damage.

6.2 Mwepu

• The battery can discharge normally at temperatures as low as -4°F (-20°C).
• The 250A BMS supports a 300A peak discharge current.
• The 4096Wh energy capacity can power high-demand devices like RV air conditioners and boat motors.

6.3 Series and Parallel Connections

• The 4S4P design allows the system to be expanded up to 51.2V 1280Ah, creating a massive 65.5kWh energy system.
• Consult a qualified electrician or the HumsiENK support team for complex series/parallel configurations to ensure safety and optimal performance.

7. Nlekọta

• It is recommended to charge the battery to 50% every 3 months if it is to be left unused for a long time.
• Keep the battery clean and free from dust and debris.
• Regularly check terminal connections for tightness.

8. Nchọpụta nsogbu

The integrated 250A BMS provides multiple protections. If you experience issues, check the following:

• Overcharging/Over-discharging: The BMS will prevent these conditions. Ensure your charger is compatible with LiFePO4 batteries.
• Ibu oke ibu/Oke mkpụmkpụ: The BMS will activate protection. Disconnect the load, identify and resolve the issue, then reconnect.
• High/Low Temperature: The BMS protects against extreme temperatures. Charging is cut off below 32°F (0°C), and discharge is possible down to -4°F (-20°C). Ensure the battery operates within its specified temperature range.
• Njikọ Bluetooth: Ensure your device is within 8 meters of the battery. Restart the app or your device if connection issues persist.

9. Nkọwapụta

10. Ngwa

The HumsiENK 12V 320Ah LiFePO4 battery is a versatile solution suitable for a wide range of applications, including:

• Nchekwa ike ụlọ
• UPS ike ndabere
• RV and Camper Power Systems
• Ụgbọ ala gọọlfụ
• Trolling Motors and Yachts
• Solar Energy Systems
• Digital/CCTV Camera Systems
• Ọrụ N'onwe Gị

11. Akwụkwọ ikike na nkwado

Your HumsiENK 12V 320Ah LiFePO4 Lithium Battery is backed by a 5-year warranty. For any questions or technical support, please contact our 24/7 customer service team.

Contact information can be found on the product packaging or the official HumsiENK websaịtị.