SmallRig 175cm Carbon Fiber Video Monopod (Model 5565) Instruction Manual

Okwu mmalite

This manual provides detailed instructions for the safe and effective use of your SmallRig 175cm Carbon Fiber Video Monopod. Please read this manual thoroughly before operating the product and retain it for future reference.

Ihe ngwugwu

Nyochaa na etinyere ihe niile edepụtara n'okpuru na ngwugwu gị:

Monopod x 1
Allen Wrench x 3
Akpa na-ebu x 1

Melite

1. Mgbakọ mbụ

The monopod features an instant setup system for quick deployment. The quick-release head and extended tripod legs are designed for easy attachment and detachment.

Diagram showing the Instant Setup System of the SmallRig Carbon Fiber Monopod, highlighting the Quick Release Head, Retractable Leg, One-Touch Tripod Detachment, and Extended Tripod Legs.

Figure 1: Instant Setup System components.

2. Attaching the Fluid Head

The monopod is equipped with a detachable video head. Ensure the spring-loaded mechanism is engaged for secure attachment. The head features 1/4"-20 and 3/8"-16 screws for wide compatibility with various cameras and accessories.

Close-up of the detachable video head with 1/4 inch-20 and 3/8 inch-16 screws, showing the spring-loaded mechanism for instant switching.

Figure 2: Detachable Video Head with mounting screws.

Ntuziaka ọrụ

1. One-Button Lift & Lock Mechanism

The monopod features an innovative quick-deploy mechanism for seamless one-handed operation. To extend the leg, push the lever to unlock and lift. To collapse, push the lever again and lower the leg.

Image illustrating the 'One Push to Ready' feature, showing a hand operating a lever to extend the monopod leg for quick height adjustment.

Figure 3: One-button height adjustment in action.

2. Adjusting Monopod Feet and Angles

The quick-release monopod feet allow for rapid deployment. For angle adjustments, tap the pedal with your toe. Lightly press the pedal to release the angle lock, press fully to adjust, and press again to return to the initial position.

Image demonstrating 'Toe-Controlled Angles', showing a foot tapping a pedal to adjust the monopod's angle, with a diagram illustrating 40-degree tilt and 360-degree rotation.

Figure 4: Toe-controlled angle adjustment.

3. Versatile Usage Modes

The monopod supports various operational modes:

Monopod Mode: Standard upright use for stability.
Stabilizer Mode: Can be used with gimbals for enhanced stabilization.
Low-Angle Mode: For capturing shots close to the ground.
Ụkpụrụ guzoro: Provides a stable base for equipment (not for permanent light stand use).

Four panels showing the monopod in different modes: Monopod Mode, Stabilizer Mode, Low-Angle Mode, and Stand Mode.

Figure 5: Monopod in various operational modes.

4. Akụkụ ndị ọzọ

Oke kwụsie ike: Features 19cm (7.5") extended tripod legs.
Locating Holes: Includes 3 x 1/4"-20 locating holes for mounting monitors or magic arms.
Quick Release Safety Lock: Slide to lock for equipment safety.

Four panels detailing additional features: Two-Angle Adjustable Tripod, Extra Stability with 19cm extended legs, 3 x 1/4 inch-20 Locating Holes, and Quick Release Safety Lock.

Nyocha 6: N'eluview of additional features.

5. Video ngwaahịa

Video 1: Demonstrates the setup, one-button height adjustment, and various uses of the SmallRig Carbon Fiber Monopod.

Nlekọta

To ensure the longevity and optimal performance of your monopod, follow these maintenance guidelines:

Nhicha: Regularly wipe down the carbon fiber and aluminum alloy surfaces with a soft, dry cloth. For stubborn dirt, use a slightly damp akwa na ncha dị nro, wee kpoo nke ọma.
Nyocha: Periodically check all screws, locks, and moving parts for tightness and proper function. Use the provided Allen wrenches for any adjustments.
Nchekwa: Store the monopod in its carrying bag in a cool, dry place away from direct sunlight and extreme temperatures.

Nchọpụta nsogbu

If you encounter issues with your monopod, consider the following:

Okwu nkwụsi ike: Ensure all locking mechanisms are fully engaged. Verify that the quick-release monopod feet are properly deployed and secured.
Locking Mechanism Not Engaging: Check for any obstructions in the one-button lift & lock mechanism. Ensure the lever is fully pressed or released as required for the desired action. Familiarize yourself with the system's operation as noted by other users for optimal performance.
Mgbakwunye igwefoto: Confirm that your camera or accessory is securely mounted to the 1/4"-20 or 3/8"-16 screw on the fluid head.

For further assistance, please contact SmallRig customer support.

Nkọwapụta

Table of product specifications for the SmallRig Carbon Fiber Monopod, including dimensions, weight, maximum height, and materials.

Ọgụgụ 7: Nkọwa ngwaahịa zuru ezu.

Akụkụ ngwaahịa	760 x 99 x 79mm (29.9 x 3.9 x 3.1 sentimita)
Ibu Ibu	2.5 n'arọ (5.51 lbs)
Ogologo kachasị elu	175 cm (68.9 sentimita)
Minimum Height (Collapsed)	76 cm (29.9 sentimita)
Weight Limit (Monopod Legs)	15 n'arọ (33.07 lbs)
Weight Limit (Fluid Head)	5 n'arọ (11.02 lbs)
Ọnụọgụ nke ngalaba	4
Usoro mkpọchi	Flip Lever Locks
Ụdị isi	Isi mmiri mmiri
Isi Platform	Dual 1/4"-20 & 3/8"-16 Screws
Akụrụngwa	Carbon Fiber, Aluminum Alloy, ABS

Ozi akwụkwọ ikike

SmallRig products typically come with a limited warranty. For specific warranty terms and conditions applicable to your monopod, please refer to the warranty card included with your product or visit the official SmallRig websaịtị.

Nkwado

For technical support, customer service, or to explore other SmallRig products, please contact the manufacturer:

Onye nrụpụta: SmllRig
Akara: SMALLRIG
Storelọ ahịa n'ịntanetị: Visit the SMALLRIG Store on Amazon

	Monopod foto obereRig Carbon Fiber - Ntuziaka ọrụ Ntuziaka ọrụ gọọmentị maka SmallRig Carbon Fiber Photography Monopod (Model 1000). Nduzi a na-enye ozi dị mkpa gbasara atụmatụ ngwaahịa, ntuziaka nchekwa, njirimara akụkụ zuru ezu, na ntuziaka ojiji maka ndị na-ese foto. Mụta otu esi edozi elu, gbadaa, na idobe monopod gị maka arụmọrụ kacha mma.
	Akwụkwọ ntuziaka onye ọrụ SmallRig AD14 dị arọ nke e ji eriri carbon tripod mee Akwụkwọ ntuziaka maka SmallRig AD14 Heavy-Duty Carbon Fiber Tripod, na-akọwapụta atụmatụ ya, ntinye ya, ojiji ya, nkọwapụta ya, ntuziaka nchekwa ya, na ozi gbasara akwụkwọ ikike ya.
	SmallRig x Potato Jet TRIBEX Hydraulic Carbon Fiber Tripod Kit 4259 Operating Instructions Operating instructions and specifications for the SmallRig x Potato Jet TRIBEX Hydraulic Carbon Fiber Tripod Kit (Model 4259). This professional videography tripod features X-Clutch hydraulic technology, carbon fiber construction, adjustable height, and a fluid head with counterbalance.
	SmallRig TRIBEX Carbon II Tripod Kit 5755: Professional Videography Gear Discover the SmallRig TRIBEX Carbon II Tripod Kit 5755, engineered for professional outdoor videography. This lightweight carbon fiber tripod features advanced X-Clutch hydraulic technology, a 4-step counterbalance fluid head, and quick-release compatibility for seamless shooting experiences.
	Ntuziaka Onye Ọrụ Ngwa Tripod Video SmallRig Travel Akwụkwọ ntuziaka maka ngwa SmallRig Travel Video Tripod Kit, nke na-akọwa atụmatụ ya, nkọwapụta ya, ịdọ aka ná ntị ya, na ozi gbasara nkwa ya. Gụnyere ntuziaka maka nhazi, mgbanwe, na mmezi.
	Ngwa Tripod nke SmallRig AD-01S dị arọ: Ntuziaka na nkọwapụta ọrụ Ntuziaka na nkọwapụta zuru oke maka SmallRig AD-01S Heavy-Duty Fluid Head Tripod Kit (Model 4686), nke e mere maka ịse vidiyo ọkachamara. Atụmatụ gụnyere ụkwụ a na-agbanwe agbanwe, d nke na-enweghị nzọụkwụ.ampisi mmiri mmiri, ndakọrịta efere ngwa ngwa, na owuwu alloy aluminom siri ike.

Obere ụgbọala 5565