Ngwaahịa gafereview
The Teamson Home Modern Oval Outdoor Water Fountain is designed to enhance your outdoor or indoor space with its contemporary oval design and soothing water flow. Crafted from durable polyresin, stone powder, and fiberglass, this weather-resistant fountain features a dual water flow system and integrated LED lighting for an elegant ambiance. It operates with an electric pump, providing a continuous, calming water sound.
- Nhazi Ọkpụkpụ: A sleek gray oval design with cascading water and built-in LED lighting creates a calming, elegant ambiance.
- Ihe owuwu na-adịgide adịgide: Made from polyresin, stone powder, and fiberglass for long-lasting outdoor use.
- Nha kọmpat: Measures 15.75'' L x 9.84'' W x 31.3'' H, making it suitable for various spaces without overwhelming them.
- Ntọlite dị mfe: Simple assembly and operation with a single plug-in.

Ozi nchekwa
- Always place the fountain on a firm, level surface to prevent tipping.
- Ensure the power cord is connected to a Ground Fault Circuit Interrupter (GFCI) outlet for electrical safety.
- Keep children and pets away from the fountain during operation to prevent accidents.
- Do not operate the pump without sufficient water, as this can damage the pump.
- Kwụpụ ọkụ ọkụ tupu ime nrụzi ma ọ bụ ihicha ọ bụla.
- Do not use the fountain in freezing temperatures. Drain and store indoors during winter.
Ihe ngwugwu
Please check to ensure all components are present and undamaged:
- Fountain Body (1)
- Electric Water Pump (1)
- Ihe nkwụnye ọkụ (1)
- LED Light (pre-installed or separate) (1)
- Akwụkwọ ntuziaka (1)
Ntuziaka nhazi
Follow these steps for proper assembly and initial setup:
- Ịkwapu: Carefully remove all components from the packaging and place them on a soft, clean surface.
- Debe isi iyi: Place the fountain body on a stable, level surface in your desired indoor or outdoor location. Ensure it is near a GFCI-protected electrical outlet.
- Wụnye mgbapụta ahụ: Submerge the electric pump completely in the water reservoir at the base of the fountain. Connect the pump's tubing to the water inlet on the fountain body.
- Jikọọ ọkụ ọkụ: If the LED light is separate, connect its cable to the corresponding connector from the pump or power adapter. Ensure all connections are secure.
- Jupụta na mmiri: Fill the fountain reservoir with distilled or filtered water until the pump is fully submerged. Do not overfill.
- Njikọ Ike: Plug the power adapter into the GFCI-protected electrical outlet. The fountain should begin operating immediately.

Nhazi ntuziaka vidiyo
Ntuziaka ọrụ
- Gbanyụọ/ Gbanyụọ: To start the fountain, plug the power adapter into a working GFCI outlet. To turn it off, simply unplug the adapter.
- Ndozi usoro mmiri: Some pumps may have an adjustable flow control switch. If present, rotate the switch on the pump to increase or decrease the water flow to your preference.
- Ọkụ LED: The integrated LED light will illuminate automatically when the fountain is powered on.

Nlekọta
Regular maintenance ensures optimal performance and longevity of your fountain.
- Ọkwa mmiri: Check the water level daily and refill every few days to ensure the pump remains fully submerged. Low water levels can cause pump damage.
- Ogo mmiri: Use distilled or filtered water to minimize mineral buildup and algae growth.
- Nhicha: Clean the fountain monthly. Disconnect power, drain the water, and wipe down surfaces with a soft cloth and mild soap. Rinse thoroughly. Clean the pump filter regularly to prevent blockages.
- Njikwa Algae: If algae is an issue, use an algaecide specifically designed for fountains (follow product instructions).
- Oge oyi: Before the first freeze, drain all water from the fountain and pump. Clean and dry all components. Store the fountain and pump indoors in a dry, protected area to prevent damage from ice expansion.
Nchọpụta nsogbu
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Fountain does not operate | No power; Pump clogged; Insufficient water. | Check power connection and GFCI outlet; Clean pump and filter; Add water to reservoir. |
| Ọsọ mmiri adịghị ike | Low water level; Clogged pump/tubing; Pump flow control set too low. | Add water; Clean pump and tubing; Adjust pump flow control. |
| Excessive pump noise | Pump not fully submerged; Debris in pump; Pump vibrating against fountain. | Add water; Clean pump impeller; Adjust pump position to prevent contact. |
| Algae uto | Sunlight exposure; Untreated water. | Clean fountain regularly; Use algaecide; Change water frequently. |
Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Nọmba nlereanya | FT4324GRR |
| Agba | Agba ntụ |
| Ihe onwunwe | Polyresin (50%), Stone Powder (15%), Paint (10%), Fiberglass (10%), Electrical Components (15%) |
| Akụkụ ngwaahịa | 15.75" L x 9.84" W x 31.3" H |
| Ibu Ibu | 20.94 pound |
| Isi Iyi Ike | Igwe ọkụ eletrik |
| Njirimara Pụrụ Iche | Ihu igwe na-eguzogide |
| UPC | 810136546811 |
Akwụkwọ ikike na nkwado
For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official Teamson Home websaịtị. Debe nnata nzụta gị dị ka ihe akaebe nke ịzụrụ ihe maka akwụkwọ ikike ọ bụla.





