SEBSON Outdoor Motion Detector IR_OUT_IA User Manual

1. Okwu mmalite

Thank you for choosing the SEBSON Outdoor Motion Detector. This device is designed for reliable outdoor use, featuring an IP65 rating for weather resistance and a 240° infrared sensor. It is programmable for ignition duration, ambient brightness, and detection range, making it suitable for various lighting applications with both incandescent and LED bulbs. This manual provides essential information for safe installation, operation, and maintenance of your motion detector.

Foto 1: N'ihu view of the SEBSON Outdoor Motion Detector, showcasing its compact design and sensor lens.

2. Ntuziaka nchekwa

Please read these safety instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• Nwụnye ọkụ eletrik: Ọ bụ ọkachamara ọkụ eletrik ruru eru ga-arụ ọrụ nrụnye ahụ dịka iwu waya mpaghara si dị.
• Ịkwụsị ike: Always disconnect the main power supply before performing any installation, maintenance, or repair work.
• Voltage: Gbaa mbọ hụ na ọkọnọ voltage matches the detector's specified voltage (230 volts).
• Ojiji n'èzí: The device is IP65 rated for outdoor use, protecting against dust and water jets. Ensure all connections are properly sealed.
• Ịkwanye: Mount the detector securely on a stable wall surface.
• Ụmụaka: Keep packaging materials and small parts away from children.

3. Ngwaahịa gafereview

The SEBSON Outdoor Motion Detector features three adjustable dials for precise control over its operation:

• LUX: Adjusts the ambient brightness threshold (3-2000 LUX) at which the detector activates.
• SENS: Controls the detection range (8-14 meters).
• OGE: Sets the duration (10 seconds to 15 minutes) for which the connected light remains on after motion is detected.

Foto 2: nso nso view of the three adjustment dials (LUX, SENS, TIME) located on the underside of the motion detector.

4. Ntọala na nwụnye

4.1 Ịtinye ihe nchọta

The motion detector is designed for wall surface mounting. Choose a stable location that provides the desired detection coverage and is within the recommended mounting height.

1. Disconnect the main power supply before starting installation.
2. Separate the mounting base from the main unit.
3. Jiri ntọala nrụnye mee ihe dị ka ihe nlereanya dee ebe a na-egwupụta ihe n'elu mgbidi ahụ.
4. Gwuo oghere ma tinye plọg mgbidi kwesịrị ekwesị (ọ bụrụ na ọ dị mkpa).
5. Secure the mounting base to the wall using screws. Ensure the 'UP' arrow on the base points upwards.

Foto 3: N'azụ view of the mounting base, showing the 'UP' indicator and screw holes for wall attachment.

Image 4: Diagram illustrating the width of the mounting plate, which is 60 mm.

4.2 Waya

This motion detector uses a 3-wire connection. Ensure all wiring is done with the power supply disconnected.

• Connect the Live (L) wire from the power supply to the 'L' terminal on the detector.
• Connect the Neutral (N) wire from the power supply to the 'N' terminal on the detector.
• Connect the Switched Live (L') wire from the detector to the Live terminal of your light fixture.
• Connect the Neutral wire from the power supply to the Neutral terminal of your light fixture.
• Gbaa mbọ hụ na njikọ niile siri ike yana mkpuchi nke ọma.

4.3 Atụmatụ ntinye

Optimal performance depends on correct placement:

• Nrịgo elu: The recommended mounting height is between 1.80 meters and 2.50 meters for optimal detection.
• Mpaghara nchọpụta: The sensor has a 240° detection angle and a range of 8-14 meters. Position it to cover the desired area without unnecessary triggers.
• Zenarị ihe mgbochi: Do not mount the detector near large objects, trees, or walls that could obstruct the detection field.
• Ihe na-akpata gburugburu: Avoid mounting near direct sunlight, heat sources (e.g., vents, outdoor units), or areas with constant movement (e.g., busy roads) to prevent false triggers.

Image 5: Detection area diagram, showing the 240° angle, maximum 14m range, and recommended mounting height of 1.80m to 2.50m.

Foto 6: Akụkụ view dimensions of the motion detector, indicating a length of 99mm and a height of 61mm.

5. Ntuziaka ọrụ

After installation, restore power and adjust the settings using the three dials on the underside of the detector (refer to Image 2).

• LUX (Ambient Brightness): Turn the dial towards the 'sun' symbol for activation in brighter conditions (up to 2000 LUX) or towards the 'moon' symbol for activation only in darker conditions (down to 3 LUX).
• TIME (Ignition Duration): Rotate the dial to set how long the light remains on after motion is detected. Settings range from 10 seconds to 15 minutes.
• SENS (Detection Range): Adjust this dial to control the sensitivity and effective detection distance, from 8 meters to 14 meters. Test different settings to find the optimal range for your environment.

Nnwale: It is recommended to test the detector's settings during both day and night to ensure it operates as desired. You can set the LUX to maximum (sun symbol) for daytime testing of range and time duration, then adjust it to the desired ambient light level for normal operation.

6. Nlekọta

The SEBSON Outdoor Motion Detector requires minimal maintenance.

• Nhicha: Periodically wipe the sensor lens and housing with a soft, damp akwa iji wepu uzuzu na unyi. Ejila ihe nchacha abrasive ma ọ bụ ihe mgbaze.
• Nyocha: Regularly check the detector for any signs of damage, loose connections, or wear.
• Ihe mgbochi: Ensure no new obstructions (e.g., growing plants, debris) are blocking the sensor's field of view.

7. Nchọpụta nsogbu

If you experience issues with your motion detector, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact customer support or a qualified electrician.

8. Nkọwapụta

Technical specifications for the SEBSON Outdoor Motion Detector IR_OUT_IA:

9. Akwụkwọ ikike na nkwado

For warranty information and customer support, please refer to the documentation provided with your purchase or contact your retailer. Keep your proof of purchase for any warranty claims.