VIRIBUS Electric Tricycle User Manual

1. Ozi nchekwa

Read this manual thoroughly before operating your VIRIBUS Electric Tricycle. Failure to follow instructions may result in serious injury or property damage. Keep this manual for future reference.

• Yiri okpu agha na ihe nchekwa kwesịrị ekwesị mgbe ị na-agba ịnyịnya.
• Gbaa mbọ hụ na etinyere akụrụngwa niile nke ọma tupu ịnya ụgbọ ala ọ bụla.
• Do not operate the tricycle under the influence of alcohol or drugs.
• Soro iwu na ụkpụrụ okporo ụzọ mpaghara.
• Na-enyocha brek, taya, na batrị mgbe niile maka ọrụ kwesịrị ekwesị.
• The 468Wh high-capacity battery is safety tested by SGS (UL 2849 Certified). Handle with care and charge only with the provided charger.

2. Ihe ngwugwu

Your VIRIBUS Electric Tricycle package includes the following items:

• 1x Adult Electric Tricycle (main frame)
• 1 x chaja
• 1x Battery (468Wh, 36V 13Ah)
• 1x Ụdọ Ike
• 1 x Screwdriver
• 1x Wrench Set
• Akwụkwọ ntuziaka 1x (akwụkwọ a)
• 1x Rear Basket
• 1x Horn
• 1x Mkpọchi
• 1x Ngwa Ngwa

3. Ntuziaka Mgbakọ

Follow these steps carefully to assemble your VIRIBUS Electric Tricycle. For visual guidance, refer to the assembly videos provided.

3.1. Front Wheel Installation

1. Carefully remove the front fork from the packaging.
2. Install the front wheel onto the fork, ensuring the brake rotor aligns with the caliper. Pay close attention to the sequence of the gasket and nut installation.
3. Tighten the nuts securely using the provided wrench.

3.2. Nwụnye Handlebar

1. Insert the handlebar stem into the head tube of the frame.
2. Align the handlebars and tighten the bolts on the stem securely.

3.3. Rear Mudguards and Basket Installation

1. Attach the rear mudguards to the rear frame using the provided screws and brackets.
2. Assemble the rear basket by folding its sides and securing them.
3. Mount the assembled rear basket onto the rear rack of the tricycle, ensuring it is stable and secure.

3.4. Ntinye pedal

1. Chọpụta pedal aka ekpe (L) na aka nri (R).
2. Thread the pedals into their respective crank arms. The right pedal tightens clockwise, and the left pedal tightens counter-clockwise.
3. Use a wrench to fully tighten the pedals.

3.5. Saddle Installation

1. Insert the saddle post into the seat tube of the tricycle frame.
2. Adjust the saddle height to a comfortable riding position.
3. Secure the saddle post by tightening the quick-release lever or bolt.

3.6. Ntinye batrị

1. Gbaa mbọ hụ na chajịrị batrị zuru oke tupu echichi.
2. Slide the battery into its designated slot on the frame.
3. Jiri igodo enyere kpọchie batrị ahụ n'ebe ọ dị.

4. Ntuziaka ọrụ

4.1. Ịgbanye / gbanyụọ

Insert the key into the battery lock and turn it to the 'ON' position to power on the tricycle. Turn to 'OFF' to power off.

4.2. Ụdị ịnya igwe

Your VIRIBUS Electric Tricycle offers three riding modes:

• Njikwa ntuziaka: Ride like a traditional bicycle using the 7-speed Shimano derailleur.
• Sistemụ Enyemaka Pedal (PAS): Engage the PAS for five levels of motor assistance while pedaling. Adjust levels using the LCD display.
• Ụdị nsogbu: Use the twist throttle for motor power without pedaling, reaching a maximum speed of 15.5 mph.

4.3. LCD Display Panel

The intuitive LCD display provides essential ride information:

• Mita batrị: Always know your current charge level.
• Igwe ọsọ ọsọ: Track your current speed in MPH.
• Ọkwa PAS: Select from 1-5 levels of pedal assist.
• Odometer: View your trip's distance and total distance traveled.

4.4. 7-Speed Derailleur

The 7-speed Shimano derailleur allows for smooth gear changes, providing steady control on various terrains, including straightaways and inclines.

5. Nlekọta

Nlekọta anya mgbe niile na-eme ka ogologo ndụ na ọrụ nchekwa nke igwe eletriki eletrik gị.

• Taya: Check tire pressure before each ride. The 1.95-inch wide tires provide enhanced durability and stability.
• breeki: Inspect disc brakes for wear and proper function. Adjust as needed.
• Agbụ: Keep the chain clean and lubricated for smooth operation.
• Batrị: Charge the battery regularly, even when not in use, to maintain its health. Avoid fully discharging the battery.
• Frame: Clean the carbon steel frame with a damp akwa . Zere kemịkalụ siri ike.
• Saddle: The cushioned saddle with spring suspension is designed for comfort. Ensure it is securely fastened and adjusted to your preference.

6. Nchọpụta nsogbu

Ọ bụrụ na ị na-enwe nsogbu ọ bụla, rụtụ aka na nsogbu na ngwọta ndị a na-emekarị:

• Tricycle not powering on: Check if the battery is properly installed and locked, and if it has sufficient charge. Ensure the key is in the 'ON' position.
• moto anaghị enyere aka: Verify the PAS level on the LCD display. Check all motor wire connections.
• Brekị ndị na-adịghị arụ ọrụ nke ọma: Inspect brake pads for wear and ensure cables are properly tensioned. Adjust as necessary.
• Mkpọtụ na-adịghị ahụkebe: Check for loose components, especially around the wheels, chain, and pedals. Lubricate the chain if it's dry.

Maka enyemaka ọzọ, biko kpọtụrụ ndị ọrụ nkwado ndị ahịa.

7. Nkọwapụta

8. Akwụkwọ ikike na nkwado

VIRIBUS is committed to ensuring your complete satisfaction. We offer:

• 30-day easy returns for quality issues.
• Akwụkwọ ikike nke ọnwa 12.
• Nkwado teknụzụ ndụ oge niile.

Should you require assistance during assembly or encounter any issues after receiving the product, our dedicated support team is available through Amazon’s messaging system. Simply locate our contact information in your order details for prompt guidance.

Ozi mkpọtụrụ:

• Ogige oku: +1 (320) 377-3106 (Monday – Friday, 9:00 AM – 5:00 PM PST)
• Nkwado email: support@viribusbikes.com