1. Okwu mmalite
The UNI-T UT217A/UT217B is a versatile 2-in-1 device combining the functions of an AC/DC clamp meter and an oscilloscope. This instrument is designed for comprehensive electrical measurements, offering high precision and a user-friendly interface. It features a 2.8-inch high-definition LCD display and supports Bluetooth connectivity for mobile application integration, allowing for data transmission, analysis, and storage.
This manual provides essential information for the safe and effective operation of your UNI-T UT217A/UT217B device. Please read it thoroughly before use and retain it for future reference.
2. Ozi nchekwa
To ensure safe operation and prevent damage to the device or injury, observe the following safety precautions:
- Na-agbaso koodu nchekwa mpaghara na nke obodo mgbe niile.
- Do not use the device if it appears damaged or is operating abnormally.
- Ensure the battery is adequately charged before use to avoid unexpected power loss during critical measurements.
- Avoid contact with live circuits when connecting or disconnecting test leads.
- Do not exceed the maximum input ratings specified for each function.
- Use only specified replacement parts and accessories.
- Debe ngwaọrụ ahụ ka ọ kpọọ nkụ ma dị ọcha. Ejila ya rụọ ọrụ n'ebe mmiri dị ma ọ bụ ebe mgbawa na-agbawa agbawa.
- Kpachara anya na oke voltage warning indicator on the device.
3. Ihe ngwugwu
Nyochaa na ihe niile dị na adịghị emebi emebi mgbe ebupụ ya:
- UNI-T UT217A/UT217B Oscilloscope Clamp Mita
- Nleba ule
- -Dị-C Nchaji USB
- Akwụkwọ ntuziaka onye ọrụ
- Carrying Pouch (may vary by model/region)
4. Ngwaahịa gafereview
Familiarize yourself with the components of your UNI-T UT217A/UT217B device:
Foto 1: N'ihu view of the UNI-T UT217A/UT217B Oscilloscope Clamp Meter, showing the display, function dial, and clamp agba.
- Clamp Nkịta: Used for non-contact measurement of AC/DC current. The UT217A has a 31mm jaw opening, while the UT217B has a 38mm jaw opening.
- Ngosipụta LCD: 2.8-inch high-definition screen displaying measurement readings, waveforms, and function indicators.
- Ịkpọ oku ọrụ: Rotary switch to select measurement modes (e.g., ACV, DCV, ACA, DCA, Resistance, Capacitance, Frequency, Oscilloscope).
- Bọtịnụ ọrụ: Buttons for range selection, hold, backlight, peak hold, and other specific functions.
- Ọnụ ntinye: Sockets for connecting test leads for voltage, resistance, capacitance, and other measurements.
- Ụdị-C Port: For charging the built-in 2600mAh battery.
5. Nhazi
Before first use, ensure the device is properly set up:
- Ịchaji batrị:
- Connect the provided Type-C charging cable to the device's Type-C port.
- Connect the other end of the cable to a standard USB power adapter (not included) or a computer's USB port.
- The charging indicator on the display will show the charging status. Allow the device to fully charge before initial use. The built-in battery capacity is 2600mAh.
- Gbanyụọ/ Gbanyụọ:
- Rotate the function dial from the 'OFF' position to any desired measurement function to power on the device.
- To power off, rotate the function dial back to the 'OFF' position.
6. Ntuziaka ọrụ
This section details the primary functions of the UNI-T UT217A/UT217B.
6.1 Nneamp Meter Function (AC/DC Current Measurement)
- Rotate the function dial to the 'ACA' (AC Current) or 'DCA' (DC Current) position.
- Press the jaw release trigger to open the clamp agba.
- Enclose a single conductor (not a power cord with multiple wires) within the clamp agba. Hụ na agba ahụ emechiela nke ọma.
- Read the current value displayed on the LCD. The device features 20000 count true RMS automatic ranging.
- For surge current measurement (AC current only), select the appropriate function if available on the dial or via a button.
6.2 Oscilloscope Function (Waveform Measurement)
The oscilloscope function allows for simultaneous measurement of current and voltage ebili mmiri.
- Rotate the function dial to the 'Oscilloscope' position.
- Connect the test leads to the appropriate input terminals for voltage measurement, or use the clamp jaw for current waveform measurement.
- The display will show the real-time waveform. Use the function buttons to adjust parameters such as time base, voltage scale, and trigger settings as needed.
- Analyze the waveform characteristics (e.g., frequency, amplitude, shape).
6.3 Njikọ Bluetooth
The device supports Bluetooth connection to a mobile phone application for enhanced functionality.
- Download and install the official UNI-T mobile application from your device's app store.
- Gbaa mbọ hụ na agbanyere Bluetooth na ekwentị mkpanaaka gị.
- Power on the UT217A/UT217B.
- Open the UNI-T application and follow the on-screen instructions to search for and connect to your device.
- Once connected, you can transmit measurement data, analyze trends, and store readings directly on your mobile device.
7. Nlekọta
Proper maintenance ensures the longevity and accuracy of your device.
- Nhicha: Jiri nwayọọ, damp cloth with mild detergent to clean the casing. Do not use abrasive cleaners or solvents. Ensure the device is powered off and disconnected from any power source before cleaning.
- Nchekwa: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for extended periods, ensure the battery is partially charged (around 50%) to preserve battery health.
- Nlekọta batrị: The device has a built-in 2600mAh rechargeable battery. Avoid fully discharging the battery frequently. Recharge it regularly, especially if not used for a long time.
- Nhazi For professional applications, periodic calibration by qualified personnel is recommended to maintain measurement accuracy.
8. Nchọpụta nsogbu
Rụtụ aka na tebụl dị n'okpuru maka okwu nkịtị na azịza ha:
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Ngwaọrụ anaghị agbanwu ọkụ | Low battery; Function dial not set correctly | Charge the battery; Rotate dial to a measurement function |
| Ọgụgụ na-ezighi ezi | Improper connection; Environmental interference; Device malfunction | Check test lead connections; Move away from strong electromagnetic fields; Contact support if issue persists |
| Njikọ Bluetooth ada ada | Bluetooth off on phone; App not installed; Device not discoverable | Enable Bluetooth; Install UNI-T app; Restart device and app |
| Ngosipụta bụ oghere ma ọ bụ nchara nchara | Low battery; Backlight off; Display damage | Charge battery; Press backlight button; Contact support |
9. Nkọwapụta
Key technical specifications for the UNI-T UT217A/UT217B Oscilloscope Clamp Mita:
| Njirimara | Nkọwa |
|---|---|
| Nlereanya | UT217A / UT217B |
| Ọrụ | AC/DC Clamp Meter, Oscilloscope |
| Ngosipụta | 2.8-inch High-Definition LCD |
| Gụọ | 20000 Count True RMS |
| Ọkụ na-emeghe | UT217A: 31mm; UT217B: 38mm |
| Ọrụ Oscilloscope | Measures current and voltage waveforms simultaneously |
| Njikọta | Bluetooth to mobile phone APP (transmit, analyze, store) |
| Atụmatụ pụrụ iche | Surge current measurement (AC only), High voltage ịdọ aka ná ntị |
| Isi Iyi Ike | Type-C charging, Built-in 2600mAh battery |
| Onye nrụpụta | Ụlọ ọrụ UNI-TREND TECHNOLOGY (CHINA) CO., LTD. |
| Nọmba Nlereanya Ngwaahịa | YQ-UT217A |
10. Akwụkwọ ikike na nkwado
UNI-T products are manufactured to high quality standards and are warranted against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official UNI-T websaịtị.
For technical support, service, or inquiries, please contact your local distributor or the UNI-T customer service department. Ensure you have your product model number (UT217A/UT217B) and purchase information available when seeking support.
