Cecotec Conga Rockstar RX70 AquaPet Flex Cordless Stick Vacuum Cleaner User Manual

1. Ntuziaka nchekwa

Biko gụọ ntuziaka nchekwa niile nke ọma tupu i jiri ngwa ahụ. Debe akwụkwọ ntuziaka a maka ntụaka n'ọdịnihu.

• Gbaa mbọ hụ na ọkọnọ ọkụ voltage dabara na voltage gosiri na ngwa.
• Do not immerse the motor unit, battery, or charger in water or other liquids.
• Debe ntutu isi, uwe na-adịghị mma, mkpịsị aka na akụkụ ahụ niile pụọ na oghere na akụkụ ndị na-akpụ akpụ.
• Ewepụla ihe ndị nwere ike ire ọkụ ma ọ bụ ọkụ, ntụ ọkụ, ma ọ bụ ihe dị nkọ.
• This appliance is for household use only. Do not use outdoors or on wet surfaces unless specifically designed for it (e.g., mopping function).
• Lelee ụmụaka ka ha hụ na ha ejighi ngwa egwu egwu.
• If the power cord or plug is damaged, contact authorized technical support.

2. Ngwa ngwaahịa

Familiarize yourself with the components included with your Cecotec Conga Rockstar RX70 AquaPet Flex vacuum cleaner.

Foto nke 2.1: The Cecotec Conga Rockstar RX70 AquaPet Flex cordless stick vacuum cleaner shown with its main body, extension tube, motorized brush, and various included accessories.

Foto nke 2.2: A selection of accessories including the wall mount, upholstery brush, narrow nozzle, flexible hose, and pet grooming tool, designed for versatile cleaning.

Isi Components:

• Ngalaba Moto nwere Ngosipụta Dijitalụ
• Batrị mbughari
• Extension Tube (with Flex joint)
• Ejiri moto HairLess XL Brush with LED light
• ErgoWet Mopping Accessory

Ngwa gụnyere:

• Ugwu mgbidi
• Ngwá Ọrụ Crevice
• Ulo elu ụlọ
• Hose na-agbanwe agbanwe
• Ahịhịa anụ ụlọ
• chaja

3. Ntọala na Mgbakọ

3.1 Nchaji izizi

1. Before first use, fully charge the battery. Connect the charger to the battery or the vacuum cleaner directly.
2. The digital display will show charging progress. A full charge typically takes several hours.

3.2 Ịchịkọta ihe nhicha uzuzu

1. Insert the extension tube into the motor unit until it clicks securely.
2. Attach the motorized brush head to the other end of the extension tube, ensuring it clicks into place.

Foto nke 3.1: The main vacuum unit fully assembled, showing the motor, extension tube, and motorized brush head.

3.3 Na-agbakwunye Ngwa

The vacuum can be used in handheld mode by attaching accessories directly to the motor unit, or with the extension tube for extended reach.

Foto nke 3.2: The handheld motor unit configured with different attachments for specialized cleaning tasks, such as a crevice tool or upholstery brush.

• To attach an accessory, align it with the opening on the motor unit or extension tube and push until it locks.
• To remove, press the release button (if present) and pull the accessory off.

4. Ntuziaka ọrụ

4.1 Powering On and Selecting Modes

1. Press the power button on the motor unit to turn the vacuum on.
2. Use the mode selection button to cycle through the available power modes: Eco, Ọkara, Elu, na Akpaaka. The digital display will show the selected mode and remaining battery percentage.
3. In Akpaaka mode, the vacuum automatically adjusts suction power based on the detected dirt level, optimizing battery life.

Foto nke 4.1: A close-up of the vacuum's handle and digital display, indicating battery level and current operating mode.

4.2 Vacuum

Nke HairLess XL motorized brush is designed for effective cleaning on various floor types, including carpets and hard floors, and prevents hair tangles.

Foto nke 4.2: A zuru ezu view nke HairLess XL brush, highlighting its V-shaped design and integrated teeth for efficient hair collection and prevention of tangles.

• The integrated LED light on the brush head illuminates dark areas, making hidden dirt visible.
• Nke Flex tube allows you to bend the extension tube to reach under furniture without bending down.

Foto nke 4.3: A user demonstrating the flexibility of the vacuum's tube, allowing easy access to low areas under furniture.

4.3 Using the ErgoWet Mopping System

Nke ErgoWet system allows for simultaneous vacuuming and mopping.

1. Fill the water tank of the ErgoWet accessory with clean water. You may add a small amount of neutral floor cleaner if desired.
2. Attach the mop pad securely to the accessory.
3. Gbakwunye ya ErgoWet accessory to the motorized brush head.
4. Proceed with vacuuming as usual. The system will simultaneously mop the floor.

Foto nke 4.4: The vacuum cleaner equipped with the ErgoWet mopping accessory, ready for combined vacuuming and wet cleaning.

4.4 Using Pet Grooming Brush

The specialized pet grooming brush can be attached directly to the motor unit for grooming pets and collecting loose hair.

Foto nke 4.5: A woman using the pet grooming brush attachment to gently remove loose hair from a dog, with the vacuum collecting the hair.

5. Nlekọta

Nlekọta anya mgbe niile na-eme ka arụ ọrụ kacha mma ma gbasaa ogologo ndụ nke ihe nhicha agụụ gị.

5.1 Ịwụpụ ihe n'ime tankị uzuzu

1. Ensure the vacuum is turned off and disconnected from the charger.
2. Locate the dust tank release button and press it to detach the tank from the motor unit.
3. Open the bottom lid of the dust tank and empty its contents into a waste bin.
4. Close the lid and reattach the dust tank to the motor unit until it clicks.

5.2 Na-ehicha ihe nzacha

The vacuum uses a HEPA filter system. Clean filters regularly to maintain suction power.

1. Remove the dust tank. The filters are located inside.
2. Carefully remove the pre-filter and HEPA filter.
3. Tap the filters gently to remove dust. For thorough cleaning, rinse them under running water.
4. Allow filters to air dry completely for at least 24 hours before reinserting them. Do not use a dryer or direct heat.

5.3 Cleaning the HairLess XL Brush

1. Turn off the vacuum and detach the motorized brush head.
2. Locate the brush roll release mechanism (usually a latch or screw) and remove the brush roll.
3. Remove any tangled hair or debris from the brush roll. The V-shaped design and integrated teeth minimize tangles, but occasional cleaning is still recommended.
4. Reinsert the brush roll and secure it.

5.4 ErgoWet Mopping Accessory Maintenance

1. Mgbe ejirichara nke ọ bụla, wepụ mmiri ọ bụla fọdụrụ na tank.
2. Remove and wash the mop pad. It can typically be hand-washed or machine-washed.
3. Allow all components to air dry before storing.

6. Nchọpụta nsogbu

Ọ bụrụ na ị hụ nsogbu na igwe nhicha ihe nhicha gị, lee nsogbu na ngwọta ndị a na-ahụkarị.

7. Nkọwapụta

Key technical specifications for the Cecotec Conga Rockstar RX70 AquaPet Flex.

• Akara: Cecotec
• Aha nlereanya: Conga Rockstar RX70 AquaPet Flex
• Nọmba nlereanya: A01_EU01_115939
• Ike: 780 W
• Ike imi: 300 AW (Air Watts)
• Nrụgide mmiri: 30kp
• Batrị: 33.6 V Max, 4000 mAh Pulsar Battery
• Runtime (Eco Mode): Up to 100 minutes (handheld), up to 70 minutes (motorized brush)
• Ụdị nzacha: EGO HEPA
• Atụmatụ pụrụ iche: Cordless, Flex Tube, LED Light, ErgoWet Mopping System, HairLess XL Brush
• Ihe kpatara ụdị: Mkpịrị, ejiri aka
• Akụkụ ngwaahịa: 26 cm (L) x 12.5 cm (W) x 37 cm (H)
• Akụkụ ngwugwu: 69.5 x 34.5 x 18.5 cm
• Arọ: 2.08 n'arọ

8. Akwụkwọ ikike na nkwado

Your Cecotec Conga Rockstar RX70 AquaPet Flex comes with a manufacturer's warranty. Please refer to the warranty card included in the packaging for specific terms and conditions.

For technical assistance, spare parts, or warranty claims, please contact Cecotec customer support through their official websaịtị ma ọ bụ ozi kọntaktị enyere na akwụkwọ ngwaahịa gị.

Always provide your model number (A01_EU01_115939) and purchase date when contacting support.