AQQA AQ143 Intelligent Aquarium Heater User Manual

1. Okwu mmalite na gafereview

The AQQA AQ143 Intelligent Aquarium Heater is designed to maintain a stable and precise water temperature for your aquatic pets. Featuring advanced safety mechanisms and an external controller, this heater ensures optimal conditions for fish, reptiles, and aquatic plants in tanks ranging from 3 to 220 gallons, depending on the wattage nlereanya.

Akụkụ ndị bụ isi:

• Ihe owuwu na-adịgide adịgide: Protective case made of corrosion-resistant, high-temperature materials with an explosion-proof quartz glass tube.
• Igwe ọkụ ngwa ngwa: High purity nickel wire ensures quick and efficient heating.
• External Dual Display Controller: High-definition display for accurate real-time and set temperatures.
• Ezigbo njikwa okpomọkụ: Set temperature range from 59℉-93℉ (15℃-34℃) with 1-degree increment adjustments.
• Automatic Power Off (Out of Water): Heater automatically powers off and displays error code E1 if it leaves the water surface by 2.4 inches. Resumes normal operation when fully re-immersed.
• Ultra-high Temperature Automatic Power-off: Automatically cuts off power and displays error code HH if water temperature exceeds 95℉ (35℃). Alarm releases when temperature drops below 95℉ (35℃).
• Ọrụ ebe nchekwa: Na-ejigide ntọala mgbe ike dara.
• Ojiji dị iche iche: Suitable for both fresh and saltwater aquariums.

2. Ntuziaka nchekwa

Please read all safety instructions carefully before operating the AQQA AQ143 Intelligent Aquarium Heater to prevent injury or damage to the product and your aquarium inhabitants.

• Full Immersion: The heater must be completely immersed in water for use. Never operate the heater out of water.
• Oge oyi: If you need to remove the heater from the water, disconnect the power and allow it to cool down for at least 15 minutes before handling.
• Pre-use Inspection: Before first use, carefully check the glass tube for any cracks or damage. Do not use if damaged.
• Nchekwa eriri ọkụ: Ensure the power cord is not damaged or frayed. Do not use if the cord is damaged. Avoid creating a “drip loop” to prevent water from traveling along the cord to the outlet.
• Nkwanye: For optimal performance and safety, it is recommended to place the heater at a vertical inclination of 30-45 degrees within the aquarium.
• Iji Ezinụlọ naanị: Ezubere ikpo ọkụ a maka naanị ụlọ.

3. Ihe ngwugwu

Mgbe ị meghere ngwugwu ahụ, hụ na ihe niile dị ma dịkwa mma:

• 1 x AQQA Intelligent Aquarium Heater Unit
• 1 x External Temperature Controller with Power Cord
• 2-3 x Suction Cups (quantity may vary by model)
• 1 x Akwụkwọ ntuziaka onye ọrụ

4. Nhazi

1. Tinye iko mmiri ara: Securely attach the provided suction cups to the heater unit. These will hold the heater in place against the aquarium glass.
2. Debe Igwe ọkụ: Place the heater inside your aquarium, ensuring it is fully submerged in water. For best results, position it at a vertical inclination of 30-45 degrees. Ensure the heater is not obstructed by decorations or substrate to allow for proper water circulation.
3. Jikọọ na Ike: Plug the external temperature controller's power cord into a suitable electrical outlet. Ensure a drip loop is formed to prevent water from reaching the outlet.

Image: AQQA Aquarium Heater installed in a fish tank, showing proper placement and the external controller.

Image: Diagram illustrating correct vertical and angled placement of the heater, and incorrect horizontal placement or partial immersion.

5. Ntuziaka ọrụ

The AQQA AQ143 heater features an external controller for easy temperature adjustment and monitoring.

1. Ike Na: Once plugged in, the external controller will display the real-time water temperature (labeled 'Real' or 'Water Temp') and the set temperature (labeled 'Set Temp').
2. Tọọ okpomọkụ: Press the 'Set' button on the controller to enter setting mode. The set temperature display will flash. Use the 'Up' and 'Down' buttons (or single button press, depending on model) to adjust the desired temperature between 59℉ and 93℉ (15℃-34℃). Each press increases/decreases by 1 degree. The setting will automatically save after a few seconds of inactivity.
3. Fahrenheit/Celsius Conversion: Press and hold the 'Set' button for 8 seconds to switch between Fahrenheit (℉) and Celsius (℃) display modes.
4. Ihe ngosi ikpo oku: A red light on the controller indicates that the heater is actively heating the water. A blue light (or no light) indicates that the heater has reached the set temperature and is in standby mode.
5. Ọrụ akpaaka: The heater will automatically turn on when the water temperature falls below the set temperature and turn off once the set temperature is reached.

Image: External controller displaying real-time water temperature and user-set temperature, with heating indicator lights.

6. Nlekọta

Regular cleaning and inspection are essential for the longevity and efficient operation of your AQQA Aquarium Heater.

• Ugboro nhicha: Disassemble and clean the heater once every 1-2 weeks of continuous use.
• Mbupu: The heater is designed for easy disassembly. Gently pull the casing apart section by section to access the internal components for cleaning.
• Usoro nhicha: Use a soft brush or cloth to remove any algae or mineral buildup from the heater unit. Rinse thoroughly with aquarium water. Do not use harsh chemicals or detergents.
• Nchikota: Ensure all parts are dry and correctly reassembled before placing the heater back into the aquarium.

Image: Step-by-step guide on how to disassemble and clean the heater, along with illustrations of correct and incorrect heater placement.

7. Nchọpụta nsogbu

The AQQA AQ143 Intelligent Aquarium Heater is equipped with safety features that display error codes in certain situations.

• Error Code E1 (Out of Water): If the heater leaves the water surface by 2.4 inches, it will automatically power off and display 'E1'. To resolve, ensure the heater is fully re-immersed in the water. It will automatically return to normal operation.
• Error Code HH (Ultra-high Temperature): If the real-time water temperature is detected to be above 95℉ (35℃), the heater will automatically cut off power and display 'HH'. The alarm will be released once the water temperature drops to 95℉ (35℃) or below.
• Ihe na-ekpo ọkụ anaghị akpọ ọkụ: Check if the power cord is securely plugged in. Verify that the set temperature is higher than the real-time water temperature. Ensure the heater is fully submerged.
• Ọgụgụ okpomoku na-ezighi ezi: Compare the controller's reading with a separate, reliable aquarium thermometer. If there's a significant discrepancy, ensure the controller's sensor is clean and properly positioned.

Image: Visual explanation of the 'Out of Water Power Off' (E1) and 'Ultra-high Temperature Automatic Power-off' (HH) safety features.

8. Nkọwapụta

Image: Detailed product specifications table and visual representation of different wattage heaters with their dimensions.

9. Akwụkwọ ikike na nkwado

The AQQA AQ143 Intelligent Aquarium Heater comes with a Akwụkwọ ikike onye nrụpụta afọ 2. For any warranty claims, technical support, or product inquiries, please contact AQQA customer service through the retailer where the product was purchased.