Cecotec Bolero Flux TLT 604000 Telescopic Extractor Hood User Manual

1. Okwu mmalite

The Cecotec Bolero Flux TLT 604000 Inox A+++ is a 60cm telescopic extractor hood designed for efficient kitchen ventilation. This appliance integrates discreetly into your kitchen cabinetry, optimizing space without compromising performance. It features a powerful DC motor, an A+++ energy rating, and a suction capacity of 415m³/h to effectively remove smoke and odors. The hood is equipped with SS Touch Control for intuitive operation, three adjustable speed levels, and bright LED lighting to illuminate your cooking area. For comprehensive air purification, it includes both 5-layer dishwasher-safe aluminum filters for grease capture and carbon filters for odor elimination.

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Cecotec Bolero Flux TLT 604000 extractor hood. Please read it thoroughly before use and retain it for future reference.

2. Ntuziaka nchekwa

Iji hụ na ọrụ nchekwa na gbochie mmebi, biko debe ihe nchekwa nchekwa ndị a:

• Gbaa mbọ hụ na ọkọnọ ọkụ voltage dakọtara na akara ọkwa dị na ngwa ahụ.
• This appliance is intended for domestic use only. Do not use it for commercial purposes.
• Kwụpụ ngwa ngwa na ọkụ ọkụ tupu ihicha ma ọ bụ rụzie ya.
• Do not operate the hood without filters properly installed.
• Na-asachapụ ihe nzacha griiz mgbe niile iji gbochie ihe egwu ọkụ.
• Hụ na ikuku na-abata n'ime ụlọ ahụ nke ọma mgbe ejiri ihe mkpuchi ahụ mee ihe n'otu oge na gas ma ọ bụ ngwa ndị ọzọ na-ere mmanụ ọkụ.
• Ejila flambé n'okpuru mkpuchi nso.
• Debe ụmụaka pụọ ​​na ngwa n'oge arụ ọrụ na nhicha.
• Ọ bụrụ na eriri ọkụ ahụ mebiri emebi, onye nrụpụta, onye na-ahụ maka ọrụ ya, ma ọ bụ ndị tozuru etozu ga-anọchi ya iji zere ihe egwu.

3. Ngwaahịa gafereview

3.1 Ngwa gụnyere

Upon unpacking, verify that the following components are present:

• 1 x Cecotec Bolero Flux TLT 604000 Telescopic Extractor Hood
• Akwụkwọ ntuziaka onye ọrụ 1 x (akwụkwọ a)
• 2 x Carbon Filters (for recirculation mode, not pre-installed)

3.2 Atụmatụ

• Telescopic Design: Allows for discreet integration into kitchen cabinetry, extending when in use.
• Nha Kachasị Mma: 60 cm width, suitable for standard kitchen layouts.
• Ike mmịpụta dị elu: 415 m³/h capacity to efficiently remove cooking fumes and odors.
• Ike dị irè: DC motor with A+++ energy rating for reduced power consumption and quiet operation.
• Njikwa kensinammuo: SS Touch Control panel for easy selection of functions.
• Ọsọ dị iche iche: Three adjustable speed levels to match cooking intensity.
• Ọkụ LED: Integrated LED lights provide clear visibility of the cooking surface.
• Nzacha dị irè: 5-layer dishwasher-safe aluminum filters capture grease.
• Mkpochapụ isi: Includes carbon filters for air recirculation, neutralizing cooking odors.

Foto 1: N'ihu view of the Cecotec Bolero Flux TLT 604000 telescopic extractor hood, highlighting its sleek design and energy efficiency rating.

Foto 2: N'ihu zuru ezu view of the extractor hood, showing the integrated touch controls and LED lighting.

Foto 3: Akụkụ view of the extractor hood, illustrating its telescopic mechanism and compact profile.

4. Ntọala na nwụnye

The Cecotec Bolero Flux TLT 604000 is designed for easy installation into a kitchen cabinet. It can operate in either extraction mode (ducting air outside) or recirculation mode (filtering air and returning it to the kitchen).

4.1 chọrọ nwụnye

• Oghere Kabinet: Ensure sufficient space within the cabinet for the hood's dimensions (refer to Figure 4 for detailed measurements).
• Ịnye ọkụ: A grounded electrical outlet (220 Volts) must be available within reach of the power cord.
• Ducting (Extraction Mode): If using extraction mode, a 150 mm diameter ducting outlet is required to vent air outdoors.
• Carbon Filters (Recirculation Mode): For recirculation, ensure the carbon filters are installed (see Section 6.2).

4.2 Nzọụkwụ Nwụnye (Ntuziaka Izugbe)

1. Kwadebe Cabinet: Cut out the necessary openings in the cabinet for the hood body and the ducting (if applicable), according to the provided template or dimensions.
2. Mount Hood: Secure the hood to the underside of the cabinet using appropriate screws and brackets. Ensure it is level and firmly attached.
3. Connect Ducting (Extraction Mode): Attach the ducting hose to the hood's outlet and route it to the exterior vent. Ensure all connections are sealed to prevent air leaks.
4. Install Carbon Filters (Recirculation Mode): If using recirculation, install the carbon filters as described in the maintenance section.
5. Njikọ eletrik: Plug the hood into a grounded electrical outlet.
6. Ọrụ nnwale: Turn on the hood and test all functions (speeds, lights) to ensure proper operation.

Figure 4: Technical diagram showing the dimensions of the Cecotec Bolero Flux TLT 604000 extractor hood for installation planning. All measurements are in millimeters.

Figure 5: The telescopic extractor hood seamlessly integrated into a modern kitchen setting, demonstrating its discreet design.

5. Ntuziaka ọrụ

The Cecotec Bolero Flux TLT 604000 features an intuitive SS Touch Control panel for easy operation.

5.1 Ọrụ Panel Control

Figure 6: Close-up of the SS Touch Control panel, showing the power, speed, and light icons.

• bọtịnụ ike (⏻): Press to turn the hood on or off.
• Speed Control (☯): Press repeatedly to cycle through the three suction speeds (Low, Medium, High).
• Bọtịnụ ọkụ (☀): Pịa iji gbanye ma ọ bụ gbanyụọ ọkụ LED.

Figure 7: Visual representation of the three adjustable speed levels, allowing users to select appropriate suction power for different cooking needs.

Figure 8: The extractor hood with its LED lighting activated, providing clear illumination over the cooking area.

Figure 9: Illustration of the hood's 415m³/h suction power effectively removing cooking fumes and odors from the kitchen environment.

6. Nlekọta

Regular maintenance ensures the longevity and optimal performance of your extractor hood. Always disconnect the appliance from the power supply before performing any maintenance.

6.1 Cleaning Aluminum Grease Filters

The hood is equipped with 5-layer aluminum grease filters designed to capture airborne grease particles. These filters should be cleaned regularly, depending on usage, typically every 2-4 weeks.

• Mwepụ: Carefully unlatch and remove the aluminum filters from the hood.
• Nhicha: The filters are dishwasher-safe. Alternatively, they can be washed by hand in hot water with a mild detergent. Ensure all grease residue is removed.
• Drying and Reinstallation: Allow the filters to dry completely before reinstalling them into the hood.

Figure 10: Diagram illustrating the multi-layer structure of the aluminum grease filters, designed for effective grease capture.

6.2 Installing and Replacing Carbon Filters (Recirculation Mode)

If your hood is operating in recirculation mode, carbon filters are essential for removing cooking odors. These filters are not washable and must be replaced periodically, typically every 3-6 months, depending on usage.

• Nwụnye: Attach the carbon filters to the motor housing or filter grids as per the specific design. Ensure they are securely fastened.
• Ndochi: When replacing, remove the old carbon filters and dispose of them. Install new carbon filters following the installation steps.

Figure 11: Image of the included carbon filters, which are crucial for odor elimination in recirculation mode.

6.3 Nhicha izugbe

Clean the exterior surfaces of the hood regularly with a soft cloth and a mild, non-abrasive detergent. Avoid using harsh chemicals or abrasive cleaning pads, which can damage the stainless steel finish.

7. Nchọpụta nsogbu

Tupu ịkpọtụrụ nkwado ndị ahịa, biko rụtụ aka na ntuziaka nchọpụta nsogbu ndị a maka okwu nkịtị:

8. Nkọwapụta

9. Akwụkwọ ikike na nkwado

Cecotec products are manufactured to high-quality standards. In the unlikely event of a defect, please refer to the warranty terms provided at the time of purchase.

• Nnweta akụkụ mapụtara: Spare parts for this appliance are available in the EU for a duration of 10 years from the date of purchase.
• Nkwado ndị ahịa: For technical assistance, warranty claims, or to purchase replacement parts, please contact Cecotec customer service through their official websaịtị ma ọ bụ onye na-ere ahịa ebe a zụrụ ngwaahịa ahụ.