KERDOM Foldable Electric Wheelchair User Manual

Okwu mmalite

This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your KERDOM Foldable Electric Wheelchair, Model KD-B02. Please read this manual thoroughly before using the wheelchair to ensure proper understanding and to prevent injury or damage.

Ozi nchekwa

Nchekwa gị bụ ihe kacha mkpa. Soro ntuziaka nchekwa ndị a mgbe niile:

• Always ensure the wheelchair is fully unfolded and locked before use.
• Engage the EABS parking system when stationary.
• Agafela ikike ịdị arọ kacha nke 330 lbs.
• Avoid operating the wheelchair on slopes exceeding 12 degrees.
• Regularly inspect tires, brakes, and electrical connections.
• Debe aka na uwe n'akụkụ akụkụ ndị na-akpụ akpụ.
• Use the seat belt at all times.
• Consult a healthcare professional for guidance on safe operation if you have any medical conditions.

Melite

Ịkpọghee oche nkwagharị

The KERDOM electric wheelchair features a 3-second folding design for portability. To unfold:

1. Debe oche nkwagharị a kpọchiri akpọchi n'elu ebe dị larịị ma kwụsie ike.
2. Gently pull the backrest upwards until the frame locks into place.
3. Press down on the seat cushion until it is flat and secure.
4. Gbaa mbọ hụ na etinyere usoro mkpọchi niile tupu ejiri ya.

Figure 1: The KERDOM Foldable Electric Wheelchair in its unfolded state, ready for use.

Attaching the Joystick Controller

The 360° joystick controller can be attached to either the left or right armrest for user convenience.

1. Locate the mounting bracket on the desired armrest.
2. Slide the joystick controller onto the bracket until it clicks into place.
3. Secure the controller using the provided screw or locking mechanism.
4. Connect the controller cable to the corresponding port on the wheelchair frame.

Ọgụgụ 2: Zuru ezu view of attaching the joystick controller to the armrest.

Ijikọ eriri ọkụ

Ensure all power cables are securely connected before operating the wheelchair. Incorrect connections can lead to improper function or charging issues.

1. Locate the main power cable connectors near the battery compartment.
2. Connect the red power cord securely. Failure to do so may result in the charging indicator lighting up while charging, but not actually charging.
3. Verify that all motor cables are correctly plugged in. If the wheelchair operates in the opposite direction, check and correct the left and right motor wire connections.

Ntuziaka ọrụ

Na-agbanye ma gbanyụọ

• To power on: Press and hold the power button on the joystick controller until the indicator lights illuminate.
• Iji gbanyụọ ọkụ: Pịa ma jide bọtịnụ ike ahụ ọzọ ruo mgbe ọkụ ngosi ahụ gbanyụrụ.

Driving the Wheelchair

The 360° flexible joystick provides precise control over movement.

• Iga n'ihu/Azu: Gently push the joystick forward or pull it backward.
• Na-atụgharị: Push the joystick left or right to steer.
• Nkwụsị: Release the joystick to its neutral position. The EABS parking system will automatically engage, stopping the wheelchair safely.

Figure 3: The intelligent 360° flexible joystick for precise maneuverability, showing controls for balance, steering sensitivity, and safe stopping on inclines.

Speed Adjustment and Horn

• Ndozi ọsọ ọsọ: Use the '+' and '-' buttons on the joystick controller to increase or decrease the speed. The LED display will show the current speed setting.
• mpi: Press the horn button on the joystick controller to activate the horn for safety.

Ọrụ Usoro ntuziaka

To push the wheelchair manually without power, you need to disengage the motors.

1. Ensure the handbrake is in the down position.
2. Pull out the clutches on both sides of the wheelchair (located near the rear wheels). This disengages the motors, allowing the wheels to move freely.
3. To re-engage electric power, push the clutches back in.

Figure 4: Location of the manual brake and clutches for switching between electric and manual modes.

Nlekọta

Nlekọta batrị na ịchaji

• Chajịa batrị zuru oke tupu ojiji mbụ.
• Jiri naanị chaja enyere.
• Achachala batrị karịa. Kwupu chaja ozugbo batrị jupụtara.
• Store the wheelchair and battery in a cool, dry place.
• If storing for extended periods, charge the battery every 1-2 months to maintain its lifespan.

Figure 5: The LED display on the joystick shows battery life and speed clearly, aiding in timely charging.

Nhicha na Nchekwa

• Jiri mgbasa ozi hichaa fremu ahụamp akwa . Zere iji ihe nhicha abrasive.
• The breathable seat cushion can be removed for cleaning.
• For storage, fold the wheelchair as demonstrated in the setup section.
• Store in a dry, protected area away from direct sunlight and extreme temperatures.

Figure 6: The compact, folded electric wheelchair fits easily into a car trunk for convenient transport and storage.

Nlekọta taya

The wheelchair is equipped with solid, puncture-resistant tires, eliminating the need for inflation. Periodically check for debris embedded in the treads and remove them to maintain traction.

Nchọpụta nsogbu

Ọ bụrụ na ị na-enwe nsogbu ọ bụla, rụtụ aka na nsogbu na ngwọta ndị a na-emekarị:

Nkọwapụta

• Ụdị: KD-B02
• Ike ibu: 330 n'arọ
• Akụkụ ngwaahịa: 36.19"D x 24.8"W x 33.4"H
• Ibu (na-enweghị batrị): Ihe dịka 57 lbs
• moto: Dual 250W motors (Total 500W)
• Batrị: 24V 12 Ah Lithium-ion
• Ihe Frame: Iron, Plastic
• Njikwa: 360° Joystick
• Sistemụ breeki: EABS Parking System
• Anti-Tip Wheels: gụnyere
• Slope Capability: ≤12°
• Taya: Puncture-resistant solid tires

Akwụkwọ ikike na nkwado

KERDOM provides a 12-month warranty for this electric wheelchair. For any queries, technical assistance, or warranty claims, please contact KERDOM's 24/7 US-based customer support. Our quick-response team aims to resolve issues within 24 hours.

Maka ozi ndị ọzọ, gaa na KERDOM Store.