1. Okwu mmalite
The EPOMAKER Click Lite Wireless Gaming Mouse is designed for precision and versatility across multiple platforms. Featuring tri-mode connectivity, a high-precision PAW3311 sensor, and a lightweight ergonomic design, it offers an enhanced user experience for gaming and productivity.
2. Ihe ngwugwu
- 1 x Click Lite Wireless Gaming Mouse
- 1 x 2.4GHz Dongle (stored inside the mouse)
- 1 x Detachable USB-A to USB-C Cable
- 1 x Akwụkwọ ntuziaka onye na-asụ ọtụtụ asụsụ
- Extra PTFE Stickers
3. Ngwaahịa gafereview
Atụmatụ igodo
- Njikọta ụdị atọ: Supports 2.4GHz wireless, Bluetooth (BT1/BT2), and USB-C wired connections.
- Ihe mmetụta dị elu nke ọma: Equipped with a PAW3311 sensor, offering adjustable DPI from 800 to 12,000.
- Bọtịnụ enwere ike ime: Features 5 customizable buttons for personalized control.
- Batrị na-adịte aka: Integrated 500mAh rechargeable battery provides up to 78 hours of continuous use.
- Nhazi dị fechaa: Weighs only 59 grams for comfortable extended use.
- Ọnụego ntuli aka dị elu: Stable 1000Hz polling rate with 1ms latency.
- Nhazi Ergonomic: Shaped for natural fit and fatigue-free operation.
Bọtịnụ na ihe ngosi
- Pịa bọtịnụ aka ekpe/aka nri: bọtịnụ òké ọkọlọtọ.
- Mpempe akwụkwọ mpịakọta: For scrolling and middle-click functionality.
- Bọtịnụ DPI Elu/Ala: Located near the scroll wheel for on-the-fly DPI adjustment.
- Bọtịnụ akụkụ: Two programmable buttons on the left side.
- Mgbanwe Njikọta: Located on the bottom of the mouse to select 2.4G, BT1, BT2, or USB wired mode.
- Polling Rate Button: Located on the bottom of the mouse to cycle through polling rates.
- Ihe ngosi LED: Provides feedback on DPI, polling rate, and connectivity status.
4. Nhazi
Ịchaji òké
Connect the included USB-A to USB-C cable to the mouse's front USB-C port and to a power source (e.g., computer USB port, USB wall adapter). The LED indicator will show charging status.
Ụdị njikọ
The Click Lite mouse supports three connection modes: 2.4GHz wireless, Bluetooth, and USB-C wired. Use the switch on the bottom of the mouse to select your desired mode.
- Ọnọdụ ikuku 2.4GHz:
- Remove the 2.4GHz USB dongle from its storage slot on the bottom of the mouse.
- Tinye dongle n'ọdụ ụgbọ mmiri USB-A dị na kọmputa gị.
- Slide the switch on the bottom of the mouse to the '2.4G' position. The mouse will automatically connect.
- Bluetooth Mode (BT1/BT2):
- Slide the switch on the bottom of the mouse to either 'BT1' or 'BT2' position.
- On your device, search for Bluetooth devices and select 'EPOMAKER Click Lite' to pair. The LED indicator will flash during pairing and become solid once connected.
- You can pair with two different Bluetooth devices using BT1 and BT2.
- Ụdị eriri USB-C:
- Connect the USB-A to USB-C cable from your computer to the mouse.
- Òké ahụ ga-arụ ọrụ dị ka òké wired wee kwụọ ụgwọ n'otu oge.
5. Ntuziaka ọrụ
Mmezi DPI
The mouse features adjustable DPI settings from 800 to 12,000. Use the DPI Up/Down buttons located behind the scroll wheel to cycle through the preset DPI levels. The LED indicator will change color to reflect the current DPI setting.
Ndozi nha ntuli aka
The polling rate can be adjusted using the dedicated button on the bottom of the mouse. Cycle through available polling rates (e.g., 125Hz, 250Hz, 500Hz, 1000Hz) to match your preference and optimize responsiveness.
Ọnọdụ batrị
The mouse is equipped with a 500mAh rechargeable battery, offering up to 78 hours of continuous use on a full charge. The LED indicator will signal low battery status and charging progress.
6. Nhazi ngwanrọ
Enhance your mouse functionality by downloading the official EPOMAKER Click Lite driver software from the EPOMAKER website. The software allows for advanced customization of buttons, DPI, and performance settings.
Ntọala igodo
- Change Key Setting: Reassign functions to any of the 5 programmable buttons.
- Rapid-fire Key: Configure a button for rapid, repeated key presses.
- Combo Keys: Assign complex key combinations to a single button.
- Ntọala nnukwu: Create and assign custom macros for automated sequences.
- Ọrụ: Access a library of predefined functions to assign to buttons.
- Gbanyụọ igodo: Deactivate specific buttons to prevent accidental presses.
Ntọala DPI
Fine-tune your mouse sensitivity by adjusting DPI levels. The software allows for precise control over DPI values and associated LED colors.
Ntọala arụmọrụ
- Move Correction: Enable or disable Straight Correction and Ripple Correction for smoother tracking.
- Ntọala ụra: Adjust the 2.4G and Bluetooth standby times to conserve battery.
- Mouse Report Rate: Set the polling rate (125Hz, 250Hz, 500Hz, 1000Hz).
- Parameter Settings (Debounce): Adjust the debounce time for click registration.
7. Nlekọta
- Nhicha: Use a soft, dry cloth to clean the mouse surface. For optical sensor, use a cotton swab lightly dampetinyere ya na mmanya isopropyl.
- Nchekwa: Chekwaa òké ahụ n'ebe dị jụụ, kpọrọ nkụ pụọ na ìhè anyanwụ kpọmkwem na oke okpomọkụ.
- Nlekọta batrị: Zere ịchaji batrị ugboro ugboro. Na-akwụ ụgwọ òké oge niile iji kwado ahụike batrị.
8. Nchọpụta nsogbu
| Nsogbu | Ngwọta enwere ike |
|---|---|
| Mouse not responding in 2.4GHz mode | Ensure the 2.4GHz dongle is securely plugged into a USB port. Check if the mouse switch is set to '2.4G'. Try a different USB port. |
| Nsogbu njikọ Bluetooth | Ensure the mouse switch is set to 'BT1' or 'BT2'. Make sure Bluetooth is enabled on your device and the mouse is in pairing mode. Remove previous pairings and re-pair. |
| DPI anaghị agbanwe agbanwe | Press the DPI Up/Down buttons firmly. If using custom software settings, ensure they are applied correctly. |
| Ihe nrụaka òké na-adịghị arụ ọrụ nke ọma ma ọ bụ na-anaghị anabata ozi | Clean the optical sensor on the bottom of the mouse. Ensure you are using the mouse on a suitable surface (not highly reflective or transparent). |
| Ndụ batrị dị mkpụmkpụ | Ensure the mouse is fully charged. Adjust sleep settings in the software to conserve power. |
9. Nkọwapụta
- Ụdị: Click Lite
- Njikọta: 2.4GHz Wireless, Bluetooth, USB-C Wired
- Ihe mmetụta: PAW3311 Ihe mmetụta anya
- DPI: 800-12,000 (Adjustable)
- Ọnụego ntuli aka: 125Hz, 250Hz, 500Hz, 1000Hz
- Bọtịnụ: 5 bọtịnụ mmemme
- Batrị: 500mAh nwere ike ịchaji
- Ndụ batrị: Ruo awa 78 (iji na-aga n'ihu)
- Arọ: Ihe dị ka 59 g
- Akụkụ: 4.76 x 2.5 x 0.04 sentimita asatọ
- Ọsọ ọsọ: 35G
- Ọsọ nsochi: 300 IPS
- ndakọrịta: PC, Mac, Linux
10. Akwụkwọ ikike na nkwado
EPOMAKER products come with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please visit the official EPOMAKER websaịtị ma ọ bụ kpọtụrụ ndị ahịa nkwado otu ha. Debe akwụkwọ nnata ịzụrụ maka akwụkwọ ikike.
