Jesebang YT18 Wireless Earbuds

Okwu mmalite

Thank you for choosing the Jesebang YT18 Wireless Earbuds. This manual provides detailed instructions to help you set up, operate, and maintain your earbuds for optimal performance. Please read this manual thoroughly before use and retain it for future reference.

Kedu ihe dị na Igbe ahụ

Ngwungwu ahụ gụnyere ihe ndị a:

• 2 x YT18 Wireless Earbuds
• 1 x Akpa Nchaji enwere ike ibugharị
• 1 x USB-C Nchaji USB
• 3 x Pairs of Silicone Earplugs (S/M/L)
• 1 x Akwụkwọ ntuziaka onye ọrụ

Image: Contents of the Jesebang YT18 Wireless Earbuds package.

Ngwaahịa gafereview

The Jesebang YT18 Wireless Earbuds feature an over-ear design with ear hooks for a secure fit, making them suitable for sports and active use. The charging case includes an LED display to show battery levels.

Image: Dimensions of the Jesebang YT18 charging case and earbuds.

Na-amalite

1. Ịchaji ihe ntị na akpa

Before first use, fully charge the earbuds and the charging case. Place the earbuds into the charging case. Connect the USB-C charging cable to the charging port on the case and to a power source. The LED display on the case will indicate the charging status and battery level.

Image: USB-C charging port and LED display on the charging case.

Image: Battery life indicators for earbuds and charging case.

2. Yiri ekwe ntị

For optimal sound quality and comfort, choose the correct size silicone earplugs (S, M, L) that fit your ears. The earbuds are designed with flexible ear hooks for a secure fit during physical activity.

1. Pick up the headphones and choose the best fit from the 3 different ear tips (S, M, L).
2. Plug the headphones along the ear canal into the ears.
3. Revolve the ear hooks until they are inserted behind the ears.
4. Adjust the headphones to your comfortable angle.

Image: Instructions for stable wearing of the earbuds.

3. Ijikọ na ngwaọrụ gị

The earbuds feature one-step auto-pairing after the initial setup.

1. Wepu ekwe ntị n'ihe nchaji. Ha ga-abanye na ọnọdụ njikọta na-akpaghị aka.
2. On your device (smartphone, tablet, etc.), activate Bluetooth settings.
3. Chọọ maka "YT18" in the list of available devices and select it to connect.
4. Once paired, the earbuds will automatically connect to your device when removed from the case.

Image: One-step auto-pairing process.

Operating Instructions: Touch Controls

The earbuds are equipped with touch sensors for easy control of various functions:

• Gwuo/kwụsịtụ: Pịa ugboro 2
• Abụ na-esote: Tap and hold for 2 seconds (Right earbud)
• Abụ gara aga: Tap and hold for 2 seconds (Left earbud)
• Olu elu: Tap 1 time (Right earbud)
• Olu ala: Tap 1 time (Left earbud)
• Azịza/Kwụsị Oku: Pịa 1 oge
• Jụ oku: Pịa ma jide maka 2 sekọnd
• Mee ka Onye Enyemaka Olu (Siri) rụọ ọrụ: Pịa ugboro 3

Image: Touch control functions diagram.

Atụmatụ igodo

Bluetooth 5.4

The earbuds utilize Bluetooth 5.4 technology for a stable and efficient wireless connection. This technology provides faster transmission speeds and a connection range of up to 15 meters.

Image: Advanced Bluetooth 5.4 technology.

Ọdịda dị elu

Equipped with 14.2mm dynamic drivers, the YT18 earbuds deliver balanced audio with clear highs, mids, and defined low frequencies, enhancing your listening experience.

Image: Internal components for high-quality audio.

Clear Calls with ENC Noise Cancelling

The earbuds feature 4 ENC (Environmental Noise Cancellation) microphones to filter out ambient noise, ensuring your voice is clear during calls, even in noisy environments.

Image: Dual ENC microphones for noise cancellation.

Ndụ batrị agbatịkwuru

Enjoy up to 8 hours of music playback on a single charge. The portable charging case extends the total battery life to up to 48 hours, providing power for extended use.

Image: 48 hours ultra-long playtime and LED display.

Ogo IP7 enweghị mmiri

The earbuds feature an IP7 waterproof rating, providing protection against sweat and rain. This makes them suitable for workouts and outdoor activities.

Image: IP7 dust and water resistance for active use.

Nkọwapụta

Nchọpụta nsogbu

If you encounter any issues with your Jesebang YT18 Wireless Earbuds, please refer to the following common solutions:

• Igwe ntị anaghị ejikọta: Ensure both earbuds are removed from the charging case. Turn off and on your device's Bluetooth, then try pairing again. If issues persist, try resetting the earbuds (refer to manufacturer's specific reset instructions if available, otherwise place back in case and try re-pairing).
• Naanị otu earbud na-arụ ọrụ: Place both earbuds back into the charging case, close the lid, wait a few seconds, then remove them. This often re-syncs them.
• Olu dị ala ma ọ bụ ogo ụda adịghị mma: Check the earbud fit and try different sized ear tips. Ensure the earbuds and your device's volume are turned up. Clean any debris from the earbud speakers.
• Nsogbu ịchaji: Ensure the charging cable is securely connected to both the case and the power source. Check if the charging pins on the earbuds and inside the case are clean and free of obstruction.
• Njikwa mmetụ anaghị anabata: Gbaa mbọ hụ na mkpịsị aka gị dị ọcha ma kpọọ nkụ. Gbalịa ịmalitegharị igwe ntị site na itinye ya na akpa ahụ wee bupụ ya ọzọ.

Nlekọta na nlekọta

• Debe earbuds na chaja dị ọcha ma kpọọ nkụ.
• Wipe the earbuds with a soft, dry cloth. Do not use abrasive cleaners.
• Clean the charging contacts on the earbuds and in the case regularly with a dry cotton swab to ensure proper charging.
• Chekwaa ekwe ntị n'ime igbe nchaji mgbe ejighị ya iji chekwaa ya ma chekwaa batrị.
• Zere oke okpomọkụ yana ìhè anyanwụ kpọmkwem.
• While the earbuds are IP7 waterproof, avoid prolonged submersion in water.

Akwụkwọ ikike na nkwado

For warranty information or technical support, please refer to the documentation provided with your purchase or contact Jesebang customer service through their official channels. Keep your proof of purchase for warranty claims.