Ntuziaka Onye Ọrụ MMS-4 Bluetooth Active Studio Monitors

1. Okwu mmalite

Thank you for choosing the Fame MMS-4 Bluetooth Active Studio Monitors. This manual provides essential information for the safe and efficient operation of your new studio monitors. Please read this manual thoroughly before use and retain it for future reference.

2. Ntuziaka nchekwa

• Isi mmalite ike: Connect the unit only to the specified power supply voltage. Ensure the power cable is not damaged.
• Igwe ikuku: Do not block ventilation openings. Ensure adequate airflow around the speakers to prevent overheating.
• Mmiri: Ewepụla unit ahụ na mmiri ozuzo ma ọ bụ mmiri. Edokwala ihe jupụtara na mmiri mmiri, dị ka vases, na unit.
• Okpomọkụ: Debe ngwaọrụ ahụ n'ebe dị anya site na isi iyi okpomọkụ dịka radiators, ndekọ okpomọkụ, stovu, ma ọ bụ ngwaọrụ ndị ọzọ (gụnyere amplifiers) nke na-emepụta okpomọkụ.
• Nhicha: Jiri ákwà kpọrọ nkụ hichaa ya naanị. Ejila ihe nhicha mmiri ma ọ bụ ihe na-eme ka ọ dị nro.
• Ije ozi: Anwala ịnye ngwaahịa a n'onwe gị. Tụtụ aka n'aka ndị ọrụ ruru eru.
• Nkwanye: Place the speakers on a stable, level surface to prevent them from falling.
• Nchedo Ntị: Avoid prolonged exposure to high volume levels, which can cause permanent hearing damage.

3. Ihe ngwugwu

Biko lelee na etinyere ihe niile edepụtara n'okpuru na ngwugwu gị:

• 1x Fame MMS-4 Active Studio Monitor (Master)
• 1x Fame MMS-4 Passive Studio Monitor (Slave)
• 1x Speaker Connection Cable
• 1 x eriri ọkụ
• 1x Akwụkwọ ntuziaka onye ọrụ

4. Ngwaahịa gafereview

4.1 N'ihu View

Foto 1: N'ihu view of the Fame MMS-4 studio monitors with protective grilles installed. Both speakers feature the 'FAME' logo at the bottom.

Foto 2: N'ihu view of the Fame MMS-4 studio monitors with grilles removed, revealing the tweeter and woofer components.

The front panel of the MMS-4 monitors features the speaker drivers (woofer and tweeter) and a removable protective grille. The active speaker also includes a small LED indicator for power and Bluetooth status.

4.2 Side Panel (Active Speaker)

Image 3: Side panel of the active Fame MMS-4 monitor, showing the control interface with USB port, volume, treble, bass knobs, and mode selection buttons.

The side panel of the active (master) speaker houses the main controls and additional connectivity options:

• Ọdụ ụgbọ mmiri USB: Maka ịkpọ ụda files site na draịvụ USB.
• Mpịakọta olu (Mpịakọta olu): Na-edozi olu mmepụta n'ozuzu ya.
• TRE (Treble) Knob: Na-agbanwe mmeghachi omume ugboro ugboro dị elu.
• BAS (Bass) Knob: Na-agbanwe mmeghachi omume dị ala ugboro ole.
• MODE Buttons: Selects input source (Bluetooth, Line In, USB, Coaxial).

4.3 Rear Panel (Active Speaker)

Image 4: Rear panel of the active Fame MMS-4 monitor, displaying various input and output connections, power switch, and AC input.

The rear panel of the active speaker provides all necessary audio inputs and power connections:

• INPUTS (RCA): Stereo RCA inputs for connecting external audio devices.
• Ntinye COAXIAL: Digital coaxial input.
• OUTPUTS (Speaker): Connects to the passive speaker.
• AC ntinye: Power cable connection (AC110-240V ~ 60Hz).
• Mgbanwe IKE: Gbanyụọ otu ahụ ma ọ bụ gbanyụọ.

4.4 Rear Panel (Passive Speaker)

Image 5: Rear panel of the passive Fame MMS-4 monitor, showing the speaker input terminals for connection to the active speaker.

The passive speaker features speaker input terminals for connection to the active speaker using the provided speaker cable.

5. Nhazi

1. Nkwanye: Place the active and passive speakers on a stable surface, ideally at ear level, forming an equilateral triangle with your listening position for optimal stereo imaging.
2. Jikọọ ndị ọkà okwu: Use the provided speaker cable to connect the "OUTPUTS (Speaker)" terminals on the active speaker to the "INPUT" terminals on the passive speaker. Ensure correct polarity (red to red, black to black).
3. Jikọọ Isi iyi ọdịyo:
   • RCA: Connect your audio source (e.g., mixer, audio interface) to the "INPUTS (RCA)" on the active speaker.
   • Coaxial: Connect a digital audio source to the "COAXIAL Input" on the active speaker.
   • USB: Jiri ọdịyo tinye draịva USB files into the USB port on the side panel.
4. Njikọ Ike: Connect the power cable to the "AC INPUT" on the active speaker and then to a suitable wall outlet.
5. Ike Na: Flip the "POWER" switch on the rear panel of the active speaker to the "ON" position.

6. Ntuziaka ọrụ

1. Họrọ Isi mmalite ntinye: Use the "MODE" buttons on the side panel of the active speaker to cycle through the available input sources (Bluetooth, Line In, USB, Coaxial). The LED indicator will change color or pattern to indicate the selected mode.
2. Gbanwee olu: Rotate the "VOL" knob to adjust the overall listening volume. Start at a low volume and gradually increase it to a comfortable level.
3. Gbanwee ụda olu: Use the "TRE" (Treble) and "BAS" (Bass) knobs to fine-tune the high and low frequencies according to your preference or room acoustics.
4. USB playback: When USB mode is selected, the system will automatically play audio files from the connected USB drive. Use the mode buttons to skip tracks or pause playback if supported.

7. Njikọ Bluetooth

To connect your Bluetooth-enabled device to the Fame MMS-4 monitors:

1. Enable Bluetooth Mode: Press the "MODE" button on the active speaker's side panel until the Bluetooth input is selected. The LED indicator will typically flash, indicating it's in pairing mode.
2. Activate Bluetooth on Device: Na ekwentị gị, mbadamba, ma ọ bụ kọmputa, mee ka Bluetooth rụọ ọrụ ma chọọ ngwaọrụ dị.
3. Select "Fame MMS-4": From the list of found devices, select "Fame MMS-4".
4. Kwenye njikọ: Once paired, the LED indicator on the active speaker will typically stop flashing and remain solid, indicating a successful connection. You can now play audio from your device through the monitors.

8. Nlekọta

• Nhicha: Wipe the exterior surfaces of the speakers with a soft, dry, lint-free cloth. Do not use abrasive cleaners, waxes, or solvents.
• Uzuzu: Regularly remove dust from the grilles and ventilation openings using a soft brush or vacuum cleaner with a brush attachment.
• Nchekwa: If storing the speakers for an extended period, disconnect them from power, clean them, and store them in a cool, dry place, preferably in their original packaging.

9. Nchọpụta nsogbu

10. Nkọwapụta

• Ụdị: Fame MMS-4
• Ụdị: Active Studio Monitors with Bluetooth
• Akụkụ (kwa ọkà okwu): Ihe dịka 39 x 31.5 x 26 cm (15.35 x 12.4 x 10.24 sentimita asatọ)
• Weight (total): Ihe dị ka 5.56 n'arọ (12.26 lbs)
• Ntinye ike: AC110-240V ~ 60Hz
• Ntinye: Stereo RCA, Coaxial, USB, Bluetooth
• Njikwa: Volume, Treble, Bass, Input Mode

11. Akwụkwọ ikike na nkwado

Fame products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or visit the official Fame websaịtị. Biko dowe ihe akaebe nke ịzụrụ ihe maka akwụkwọ ikike.

For further assistance, contact your retailer or the manufacturer's customer support.