STRICH M3 UHF Wireless Microphone XLR Transmitter and Receiver Instruction Manual

1. Okwu mmalite

This manual provides detailed instructions for the safe and efficient operation of your STRICH M3 UHF Wireless Microphone XLR Transmitter and Receiver system. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

2. Ihe ngwugwu

Nyochaa na etinyere ihe niile edepụtara n'okpuru na ngwugwu gị:

• Mgbasa ikuku
• Onye nnata ikuku
• USB Type-C Nchaji USB
• Akwụkwọ ntuziaka onye ọrụ
• XLR to 1/4 inch Adapters (x2)

3. Atụmatụ igodo

• Lossless High-Resolution Wireless Sound: Utilizes UHF wireless RF technology with a digital DSP audio chip for extended connection range and superior vocal reproduction. Features a wide-flat frequency response, high sensitivity, and large dynamic range to minimize distortion.
• 48V Phantom Power Compatible: Supports plug-and-play for both dynamic microphones and powered condenser microphones. Note: Not compatible with high-capacitance microphones.
• Stable Signal & Ultra-Low Latency: Dual built-in antennas ensure stable, rapid signal transmission with a wireless audio range of 30-50m (98-164ft). Experience ultra-low latency (5ms) for synchronized audio.
• Ndụ batrị na-adịte aka: Equipped with a 1000Ah rechargeable lithium battery, offering 5-8 hours of use per full charge.
• Adjustable Gain Modes: Switch between MIC and LINE modes to fine-tune gain for specific scenarios, maximizing compatibility.
• Versatile Scene Compatibility: Includes 6.35 mm XLR adapters for compatibility with guitars, electronic keyboards, mixers, home theaters, KTV systems, and PA systems.
• Unique Mic Lock Mechanism: Ensures a stable connection between the microphone and the wireless system, preventing unexpected disconnections.

4. Nhazi ntuziaka

1. Chajịa ngwaọrụ: Before first use, fully charge both the transmitter and receiver using the provided USB Type-C cable. The battery indicator on the display will show charging status.
2. Ike Na: Press and hold the "POWER" button on both the transmitter and receiver for approximately 3 seconds until the display illuminates and shows "hello". The devices will automatically pair.
3. Jikọọ onye nnata: Plug the receiver directly into the XLR input of your audio mixer, PA system, or other compatible audio interface. If your device uses a 1/4 inch input, use one of the provided XLR to 1/4 inch adapters.
4. Connect the Transmitter to Microphone:
   • For dynamic microphones, simply plug the microphone's XLR output directly into the transmitter's XLR input.
   • For condenser microphones requiring phantom power, ensure the 48V phantom power is activated on the transmitter by pressing the "48V" button. Plug the condenser microphone's XLR output into the transmitter.
   • For instruments like guitars or keyboards with 1/4 inch outputs, use the appropriate XLR to 1/4 inch adapter to connect to the transmitter.
5. Secure the Microphone (Optional): If using with a microphone, twist the mic lock mechanism on the transmitter to secure it firmly to the microphone, preventing accidental disconnection.

5. Ntuziaka ọrụ

1. Nhọrọ ọwa: The STRICH M3 system offers 16 channels. To change the channel, double-click the power button on the transmitter. The receiver will automatically sync to the new channel. This helps avoid interference in environments with multiple wireless devices.
2. Gain Mode Adjustment: Press and hold the "MIC/LINE" button on the transmitter to switch between MIC and LINE gain modes. Select the appropriate mode based on the input source (microphone or line-level instrument) to optimize audio levels.
3. Phantom Power (48V) Activation: For condenser microphones that require external power, press the "48V" button on the transmitter to activate phantom power. Ensure your microphone is compatible before activating.
4. Nleba anya: Ensure your audio mixer or PA system is properly configured to receive the signal from the STRICH M3 receiver. Adjust volume levels on your main audio equipment as needed.
5. Otutu nkeji: The system supports up to 8 groups of equipment simultaneously. Ensure each pair of transmitter and receiver is set to a unique channel to prevent interference.

6. Nlekọta

• Nhicha: Use a soft, dry cloth to clean the exterior of the transmitter and receiver. Avoid using liquid cleaners or solvents, as these may damage the device.
• Nchekwa: Store the system in a cool, dry place away from direct sunlight and extreme temperatures. When not in use for extended periods, ensure the devices are fully charged before storage and periodically recharged to maintain battery health.
• Nlekọta batrị: Do not attempt to replace the internal lithium battery. If battery performance significantly degrades, contact customer support.

7. Nchọpụta nsogbu

8. Nkọwapụta

9. Akwụkwọ ikike na nkwado

STRICH is committed to providing quality products and excellent customer service. For any inquiries or issues, please refer to the following:

• Ọrụ akwụkwọ ikike: The product typically includes up to a 12-month warranty. Please retain your proof of purchase for warranty claims.
• Iwu nloghachi: A 30-day free return policy is generally available. Refer to your purchase platform for specific return instructions.
• Nkwado ndị ahịa: For prompt assistance, contact STRICH customer service. Email chat assistance is typically available within 24 hours.