SEBSON Outdoor Motion Sensor IP65 User Manual

1. Okwu mmalite

This manual provides detailed instructions for the installation, operation, and maintenance of your SEBSON Outdoor Motion Sensor IP65, Model IR_OUT_GA. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Image 1.1: The SEBSON Outdoor Motion Sensor IP65, a charcoal-colored unit designed for wall or ceiling mounting.

2. Ntuziaka nchekwa

• Ekwesịrị ịrụ ọrụ nrụnye site n'aka onye ọrụ ọkụ eletrik ruru eru dịka iwu wiwi mpaghara si dị.
• Gbaa mbọ hụ na agbapụrụ ọkụ ọkụ tupu echichi ma ọ bụ mmezi.
• Do not exceed the maximum load capacity specified in the technical data.
• This product is designed for outdoor use with IP65 protection; however, avoid direct high-pressure water jets.
• Debe ebe ụmụaka na-apụghị iru.

3. Ihe ngwugwu

Ngwungwu ahụ gụnyere:

• 1 x SEBSON IR Motion Sensor IP65
• Ngwa ndị e ji etinye ihe (skru, plọg mgbidi)
• Akwụkwọ ntuziaka (akwụkwọ a)

4. Akụrụngwa Ngwaahịa

The SEBSON Outdoor Motion Sensor IP65 is an infrared (IR) motion sensor designed for reliable outdoor use. Key features include:

• Nrịgo dị iche iche: Suitable for both wall and ceiling surface mounting.
• Oke nchọpụta sara mbara: Up to 24 meters with a 360° angle when ceiling-mounted, or 12 meters with a 180° angle when wall-mounted.
• Ntọala mmemme: Adjustable duty cycle (light duration), ambient brightness (LUX), and detection sensitivity.
• Ọrụ Swivel: The sensor head can be vertically swiveled by 180° for precise detection area adjustment.
• High Protection Class: IP65 rated for outdoor weather resistance.
• LED dakọtara: Supports LED lighting up to 600W and incandescent lamps ruo 1200W.

Foto 4.1: Ofeview of key features including detection range, power compatibility, IP rating, and adjustable settings.

Image 4.2: The sensor head can be swiveled vertically by 180 degrees to adjust the detection area.

5. Ntọala na nwụnye

5.1 Ebe nrịgo

Choose a suitable location for mounting the sensor. Consider the desired detection area and avoid placing it near heat sources, air conditioning units, or areas with frequent, unwanted movement (e.g., swaying branches) that could trigger false detections.

• Ịkwanye elu ụlọ: Provides a 360° detection angle with a range of 10m to 24m. Ideal for open areas.
• Ịkwanye mgbidi: Provides a 180° detection angle with a range of 5m to 12m. Suitable for pathways or specific directional coverage.

Foto 5.1: Ọpụample of the motion sensor installed on an outdoor wall.

Image 5.2: Detection range and angle variations for ceiling and wall installations.

5.2 Wiring (3-Wire Installation)

The sensor requires a 3-wire connection. Ensure the power supply is OFF before proceeding.

1. Connect the Live (L) wire from the power supply to the Live input terminal on the sensor.
2. Connect the Neutral (N) wire from the power supply to the Neutral input terminal on the sensor.
3. Connect the Switched Live (L') output from the sensor to the Live input of your lighting fixture.
4. Connect the Neutral (N) wire from the lighting fixture to the Neutral input terminal on the sensor (or directly to the main Neutral).
5. Gbaa mbọ hụ na njikọ niile echekwara na mkpuchi nke ọma.

Image 5.3: Base of the sensor showing wiring access points.

5.3 Nwụnye anụ ahụ

1. Mark the drilling points on the wall or ceiling using the sensor's base as a template.
2. Gwuo oghere ma tinye plọg mgbidi ma ọ bụrụ na ọ dị mkpa.
3. Secure the sensor base to the mounting surface with screws.
4. Perform wiring as described in section 5.2.
5. Attach the sensor body to the base, ensuring a tight seal for IP65 protection.
6. Adjust the sensor head to the desired angle using the swivel mechanism.

6. Ntuziaka na Mgbanwe Ọrụ

The SEBSON motion sensor features three adjustable settings to customize its operation:

Image 6.1: Adjustment dials for TIME, SENS (Sensitivity), and LUX (Ambient Brightness).

6.1 TIME (Switch-off Delay)

This dial adjusts how long the connected light remains ON after motion is no longer detected. The range is approximately 10 seconds to 15 minutes.

• Turn the dial clockwise to increase the duration.
• Turn the dial counter-clockwise to decrease the duration.

6.2 LUX (Ambient Brightness)

This dial determines the ambient light level at which the sensor will activate. The range is 0.1 LUX (darkness) to 2000 LUX (daylight).

• Set to the 'sun' symbol (max LUX) for activation during both day and night.
• Set to the 'moon' symbol (min LUX) for activation only in low light conditions or darkness.
• Adjust incrementally to find the desired activation threshold.

6.3 SENS (Sensitivity/Detection Range)

This dial adjusts the sensitivity of the motion detection, effectively controlling the detection range.

• Turn clockwise for maximum sensitivity and detection range.
• Turn counter-clockwise for minimum sensitivity and detection range.
• Adjust to prevent false triggers from distant objects or small animals.

7. Nlekọta

• Regularly clean the sensor lens with a soft, damp cloth to ensure optimal detection performance. Do not use abrasive cleaners.
• Check wiring connections periodically for any signs of wear or corrosion.
• Ensure the sensor is free from obstructions like spiderwebs, leaves, or snow, which can impair its function.
• No user-serviceable parts inside. Do not attempt to open the main housing.

8. Nchọpụta nsogbu

9. Nkọwapụta

Foto 9.1: Akụkụ ngwaahịa.

10. Akwụkwọ ikike na nkwado

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official SEBSON websaịtị. Debe ihe akaebe nke ịzụrụ maka akwụkwọ ikike.