Dasqua 6"/150mm Digital Caliper Instruction Manual

Okwu mmalite

This manual provides detailed instructions for the proper use and maintenance of your Dasqua 6"/150mm Digital Caliper. Designed for precision measurement, this tool features a stainless steel construction, advanced dual chip technology, and a large LCD display for clear readings. Please read this manual thoroughly before operating the caliper to ensure accurate measurements and extend the product's lifespan.

Ngwaahịa gafereview

The Dasqua Digital Caliper is a versatile measuring instrument capable of performing four types of measurements: external, internal, depth, and step. Its robust design and digital interface make it suitable for various applications requiring high precision.

Foto 1: Labeled components of the Dasqua Digital Caliper. Key parts include the internal measuring claw, external measuring claw, LCD display, battery compartment, locking screw, main ruler, roller, zero setting key, unit switch key, and depth measuring rod.

• Internal Measuring Claw: Used for measuring internal dimensions.
• External Measuring Claw: Used for measuring external dimensions.
• Ngosipụta LCD: Shows measurement readings.
• Akụkụ batrị: Houses the CR2032 battery.
• Ihe mkpuchi mkpọchi: Secures the slider in position.
• Main Ruler: Provides the measurement scale.
• Roller: Allows for fine adjustment of the slider.
• Zero Setting Key: Resets the display to zero at any point.
• Unit Switch Key: Toggles between inches (in) and millimeters (mm).
• Depth Measuring Rod: Used for measuring depths.

Melite

1. Mwepu na nyocha izizi

Upon receiving your Dasqua Digital Caliper, carefully remove it from its packaging. The package typically includes:

• 1 x Dasqua 6 inch Digital Caliper
• Nchedo ikpe
• Akwụkwọ ntuziaka
• 2 x CR2032 lithium batteries (one installed, one spare)

Inspect the caliper for any visible damage. Ensure all components are present and intact.

Foto 2: The Dasqua Digital Caliper, its protective case, and included accessories.

2. Ntinye batrị

The caliper uses a CR2032 lithium battery. One battery is typically pre-installed, and a spare is provided.

1. Locate the battery compartment cover on the digital display unit (refer to Figure 1).
2. Mepee mkpuchi batrị ahụ.
3. Fanye batrị CR2032 n'akụkụ dị mma (+) chere ihu n'elu.
4. Mechie mkpuchi nke batrị batrị nke ọma.

Foto 3: Illustration of the battery compartment and CR2032 battery for the digital caliper.

3. Power On and Zero Setting

After battery installation, the LCD display should power on automatically or by pressing the "ON/OFF" button.

1. Ensure the measuring jaws are completely closed and clean.
2. Pịa ZERO button (refer to Figure 1) to set the display to zero. This establishes the reference point for all subsequent measurements.

4. Nhọrọ nkeji

The caliper can display measurements in both inches and millimeters.

• Pịa mm/in button (refer to Figure 1) to switch between metric (mm) and imperial (in) units. The selected unit will be indicated on the LCD display.

Ntuziaka ọrụ

Always ensure the caliper jaws are clean before taking measurements. Avoid applying excessive force, which can lead to inaccurate readings or damage the instrument.

1. External Measurement

1. Open the external measuring jaws wider than the object to be measured.
2. Place the object between the external jaws.
3. Gently close the jaws until they make firm contact with the object. Use the roller for fine adjustment.
4. Read the measurement directly from the LCD display.
5. For consistent readings, use the locking screw to fix the jaws in place before removing the caliper from the object.

2. Internal Measurement

1. Close the internal measuring jaws and insert them into the opening of the object to be measured.
2. Gently open the jaws until they make firm contact with the internal surfaces.
3. Read the measurement directly from the LCD display.

3. Ntụle omimi

1. Place the end of the main ruler firmly on the top surface of the object.
2. Extend the depth measuring rod into the hole or recess until it touches the bottom.
3. Read the measurement directly from the LCD display.

4. Step Measurement

1. Place the end of the main ruler on the higher surface of the step.
2. Extend the slider until the step measuring surface (the end of the main beam) rests on the lower surface.
3. Read the measurement directly from the LCD display.

Foto 4: The digital caliper in use, showing a measurement on its large LCD display.

5. Reading the LCD Display

The caliper features a large 43x13mm (1.69"x0.51") LCD with 11mm (0.43") bold font for enhanced readability. The display shows the current measurement and the selected unit (mm or in).

Foto 5: The large LCD display of the caliper, designed for clear and easy reading of measurements.

Nlekọta

Proper maintenance ensures the longevity and accuracy of your digital caliper.

1. Nhicha

• Wipe the caliper clean with a dry, soft cloth after each use.
• Avoid using solvents or harsh chemicals, as these can damage the display or the caliper's finish.
• Ensure no dust, dirt, or liquids enter the electronic components or the battery compartment.

2. Ngbanwe batrị

• When the display becomes dim or erratic, it's time to replace the battery.
• Follow the battery installation steps outlined in the "Setup" section.
• Tụfuo batrị ochie nke ọma dịka iwu obodo siri dị.

3. Nchekwa

• Store the caliper in its protective case when not in use to prevent damage from impacts or dust.
• Keep the caliper in a dry environment, away from direct sunlight and extreme temperatures.
• Slightly open the jaws before storing to relieve tension on the measuring surfaces.

Nchọpụta nsogbu

Nkọwapụta

Akwụkwọ ikike na nkwado

Ozi akwụkwọ ikike

Dasqua products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Dasqua websaịtị. Akwụkwọ ikike a na-ekpuchikarị ntụpọ dị n'ihe yana arụrụ ọrụ n'okpuru ojiji nkịtị.

Nkwado ndị ahịa

Should you encounter any issues or have questions regarding your Dasqua Digital Caliper, please contact Dasqua customer support. You can find contact information on the official Dasqua websaịtị ma ọ bụ site na onye na-ere ahịa ebe ịzụrụ ngwaahịa ahụ.

Maka ozi ndị ọzọ, ị nwere ike ịga na Dasqua Store on Amazon.