1. Okwu mmalite
This manual provides essential information for the safe assembly, operation, and maintenance of your VASAGLE ULDC160K02 Dining Chairs. Please read these instructions thoroughly before assembly and retain them for future reference.
The VASAGLE ULDC160K02 Dining Chairs are designed for comfort and style, featuring a boho PE rattan back, synthetic leather upholstery, and a sturdy steel frame. They are suitable for dining rooms, kitchens, and other accent seating needs.
2. Ozi nchekwa
- Ike ibu: Do not exceed the maximum static load capacity of 265 lb (120 kg) per chair. Exceeding this limit may cause damage or injury.
- Elu nke kwụsiri ike: Ensure chairs are placed on stable, level surfaces to prevent tipping.
- Mgbakọ: Follow all assembly instructions carefully. Incorrect assembly can lead to instability and potential hazards.
- Ụmụaka: Keep small parts away from children during assembly. Do not allow children to climb on or play with the chairs unsupervised.
- Nyocha: Regularly check all screws and connections to ensure they remain tight. Retighten as necessary.
- Ntughari: Do not drag the chairs across the floor; lift them to move to prevent damage to the legs or floor.
3. Ihe ngwugwu
Tupu ịmalite mgbakọ, chọpụta na ihe niile edepụtara n'okpuru dị ugbu a na adịghị emebi emebi. Ọ bụrụ na akụkụ ọ bụla na-efu ma ọ bụ mebie, biko kpọtụrụ nkwado ndị ahịa.
- 2 x Dining Chair (disassembled components)
- 2 x Assembly Kit (hardware and tools)
- 1 x Akwụkwọ ntuziaka (akwụkwọ a)
4. Ntọala na Mgbakọ
Detailed step-by-step assembly instructions, including diagrams and a parts list, are provided within the included assembly kit. Please refer to that document for specific guidance.
Ndụmọdụ Mgbakọ Ozuruọnụ:
- Gwakọta oche ndị ahụ n'elu dị nro, dị ọcha iji gbochie ncha.
- Ensure all screws are finger-tightened initially, then fully tighten once the chair is upright and stable.
- Important Note on Legs: Pay close attention to the back legs during assembly. They are typically labeled D and E in the instructions, but may have engraved numbers (e.g., ONE and TWO) on the legs themselves. Ensure leg number TWO fits into the E side, and leg number ONE goes into the D spot. Incorrect placement can lead to instability.
Figure 4.1: Chair Dimensions and Static Load Capacity. Max. Static Load per Chair: 265 lb (120 kg).
5. Ntuziaka ọrụ (Ojiji)
The VASAGLE ULDC160K02 Dining Chairs are designed for comfortable seating in various indoor settings.
- Ebe: Sit centrally on the seat cushion. The 3.1-inch thick, 18.1-inch wide padded seat provides ampna nkasi obi.
- Nkwado azụ: The double-curved PE rattan backrest offers ergonomic support and ventilation for extended comfort.
- Nkwanye: Utilize the swivel leveling feet to ensure the chair remains stable on uneven floors. Adjust each foot by rotating it until the chair no longer wobbles.
Figure 5.1: Ergonomic Back Support and Ventilated Rattan.
Figure 5.2: Cushioned Seat Construction with High-Resilience Foam.
6. Nlekọta
Proper care will extend the life and appearance of your dining chairs.
- Ihe ndozi nhicha: The synthetic leather upholstery can be wiped clean with a damp cloth. For spills, blot immediately with a clean, dry cloth. Avoid abrasive cleaners or harsh chemicals.
- Nlekọta Rattan: Dust the PE rattan backrest regularly with a soft, dry cloth. Avoid prolonged exposure to direct sunlight or excessive moisture to prevent material degradation.
- Nlekọta Frame: Clean the steel frame with a soft, damp akwa . Kpọọ nke ọma.
- Akụrụngwa: Periodically check and tighten all screws and bolts to ensure structural integrity.
Figure 6.1: Leveling Feet and Easy-to-Clean Surface.
7. Nchọpụta nsogbu
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Chair wobbles | Uneven floor surface; loose connections; incorrect leg assembly. | Adjust the swivel leveling feet until stable. Check and tighten all screws. Verify back legs are correctly installed (refer to Section 4). |
| Parts do not fit during assembly | Incorrect orientation of parts; mismatched left/right or front/back components. | Review the assembly instructions carefully, paying attention to part labels and orientation. Do not force parts together. |
| Mkpọtụ na-eti mkpu | skru ma ọ bụ njikọ tọpụrụ. | Tighten all screws and bolts. If the noise persists, disassemble and reassemble the affected section, ensuring all parts are correctly aligned. |
8. Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Ụdị | VASAGLE |
| Nọmba nlereanya | ULDC160K02 |
| Agba | Brown kọfị |
| Akụkụ ngwaahịa (D x W x H) | 21.6" x 19.7" x 30.8" (55 cm x 50 cm x 78.2 cm) |
| Ogologo oche | 3.1 Inches (8 cm) (Cushion thickness) |
| Omimi oche | 18.1 sentimita (46 cm) |
| Ogologo oche | 18.1 sentimita (46 cm) |
| Ibu Ibu | 21.2 pounds (9.6 kg) per chair |
| Ike Ibu Kachasị Elu | 265 lb (120 kg) per chair |
| Ihe onwunwe | Steel, PE Rattan, Synthetic Leather, 58D Molded Foam, Plywood |
| Ụdị azụ | Open Back with Boho PE Rattan |
| Njirimara Pụrụ Iche | Ergonomic dual-curve back, easy cleaning, swivel leveling feet |
| Ojiji ime ime/n'èzí | Ime ụlọ |
9. Akwụkwọ ikike na nkwado
For warranty information or technical support, please refer to the documentation included with your purchase or contact VASAGLE customer service directly. Contact details can typically be found on the manufacturer's websaịtị ma ọ bụ na nnata ịzụrụ ihe.
If you have any questions or require assistance with your VASAGLE ULDC160K02 Dining Chairs, please do not hesitate to reach out to the manufacturer's support team.
