ECOELER 6-Inch Motion Sensor LED Ceiling Light

1. Okwu mmalite

Thank you for choosing the ECOELER 6-Inch Motion Sensor LED Ceiling Light. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new lighting fixture. Please read this manual thoroughly before installation and retain it for future reference.

Foto 1.1: N'ihu view of the ECOELER 6-Inch Motion Sensor LED Ceiling Light.

2. Ozi nchekwa

Iji belata ihe egwu nke ọkụ, ujo eletriki, ma ọ bụ mmerụ ahụ onwe onye, ​​na-agbaso ihe ndị a dị mkpa maka nchekwa:

• ỊDỌ AKA NA NTỊ: Ihe ize ndụ nke mkpọ ọkụ eletrik. Kwupu ike na fiusi ma ọ bụ sekit breaker tupu ịwụnye ma ọ bụ rụọ ọrụ.
• A ga-etinyerịrị ngwaahịa a dịka koodu nrụnye ọdabara si dị site n'aka onye maara ihe nrụpụta na arụmọrụ nke ngwaahịa na ihe egwu dị.
• Use only 120V AC, 60Hz circuits.
• Do not attempt to disassemble or modify the fixture. There are no user-serviceable parts inside.
• Gbaa mbọ hụ na njikọ niile echekwara na mkpuchi nke ọma.
• Ngwa a dabara adaba maka naanị ime ụlọ.

3. Ihe ngwugwu

Chọpụta na akụrụngwa niile dị tupu ịmalite nrụnye:

• 6-Inch Black Motion Sensor LED Ceiling Light (x1)
• Akụrụngwa arịọnụ (skru, akụ waya)
• E26 Adapter Accessories (for recessed can installation)
• Akwụkwọ ntuziaka (akwụkwọ a)

Image 3.1: Included accessories for installation.

4. Akụrụngwa Ngwaahịa

• 3CCT Selectable: Choose between 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight) color temperatures.
• Sensọ ngagharị: Passive Infrared (PIR) sensor detects motion within 9-16 feet.
• Oge igbu oge nwere ike idozi: Set the light to remain on for 30 seconds, 1 minute, or 5 minutes after motion ceases.
• Ihe mmetụta ọkụ: The motion sensor functions only in dark environments, remaining off during daylight hours.
• Ike dị irè: 16W LED provides 1000 lumens of brightness.
• Nwụnye ọtụtụ: Compatible with 3.5 or 4-inch junction boxes and 5 or 6-inch recessed cans.

Image 4.1: Key features including PIR sensor, 3CCT, and time delay settings.

5. Ntọala na nwụnye

Before installation, ensure the power supply is turned off at the circuit breaker.

5.1. Junction Box Installation

1. Wepu oghere site n'ịtụgharị ya na elekere.
2. Connect the supply wires to the fixture wires using the provided wire nuts: black to black (live), white to white (neutral), and green/bare copper to green (ground).
3. Attach the fixture base to the junction box using the provided screws.
4. Twist the lens counter-clockwise to secure it back onto the fixture.

5.2. Recessed Can Installation

1. Wepu oghere site n'ịtụgharị ya na elekere.
2. Install the spring clips onto the fixture base using screws.
3. Connect the E26 adapter to the existing socket in the recessed can.
4. Connect the fixture wires to the E26 adapter wires using wire nuts.
5. Push the disk light into the recessed can until the spring clips secure it.
6. Twist the lens counter-clockwise to secure it back onto the fixture.

Image 5.1: Installation diagrams for junction box and recessed can.

6. Ntuziaka ọrụ

After successful installation and restoring power, the light will be ready for operation. The ECOELER motion sensor light operates automatically based on ambient light and motion detection.

6.1. Ọrụ Ihe Mmetụta Ngagharị

• Oge ụbọchị: The light remains off even if motion is detected, due to the integrated light sensor.
• Nighttime/Dark Environments: The light will automatically turn on when motion is sensed within its detection range (approximately 9-16 feet).
• The light will turn off after the set time delay if no further motion is detected.

Image 6.1: Motion sensor operation during day and night.

6.2. Color Temperature (CCT) Adjustment

The fixture offers three color temperature options: 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight). To adjust the CCT:

1. Gbaa mbọ hụ na agbanyụrụ ọkụ.
2. Carefully remove the lens by twisting it clockwise.
3. Locate the CCT selector switch on the LED board (refer to Image 4.1).
4. Slide the switch to your desired color temperature setting (3000K, 4000K, or 5000K).
5. Replace the lens by twisting it counter-clockwise.
6. Restore power to test the new setting.

Image 6.2: Visual representation of 3CCT options.

6.3. Time Delay Adjustment

The light can be set to remain on for 30 seconds, 1 minute, or 5 minutes after motion is no longer detected. To adjust the time delay:

1. Gbaa mbọ hụ na agbanyụrụ ọkụ.
2. Carefully remove the lens by twisting it clockwise.
3. Locate the time delay selector switch on the fixture (refer to Image 4.1).
4. Slide the switch to your desired time setting (30s, 1min, or 5mins).
5. Replace the lens by twisting it counter-clockwise.
6. Restore power to test the new setting.

Image 6.3: Time delay countdown feature.

7. Nlekọta

The ECOELER LED ceiling light requires minimal maintenance.

• Nhicha: Hụ na agbanyụrụ ọkụ tupu ị sachaa ya. Jiri ihe dị nro, kpọrọ nkụ, ma ọ bụ obere ihe hichaa ihe nkwụnye ọkụ ahụ.amp cloth. Do not use harsh chemicals or abrasive cleaners, as they may damage the finish or electronic components.
• oghere: Keep the lens clean to ensure optimal light output and motion sensor performance.

8. Nchọpụta nsogbu

If you experience issues with your ECOELER LED ceiling light, refer to the following common problems and solutions:

9. Nkọwapụta

10. Akwụkwọ ikike na nkwado

This ECOELER product is backed by a Limited Warranty. For specific warranty details and duration, please refer to the documentation included with your purchase or contact ECOELER customer support.

For technical assistance, troubleshooting, or warranty claims, please contact ECOELER customer support through the retailer where the product was purchased or visit the official ECOELER websaịtị.

Onye nrụpụta: ECOELER ELECTRIC INC