Ntuziaka Onye Ọrụ Igodo Mekaniki EvoFox Katana S Mini Wireless Mechanical

Okwu mmalite

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your EvoFox Katana S Mini Wireless Mechanical Keyboard. Please read this manual thoroughly to ensure proper use and to maximize your keyboard's performance.

Image: The EvoFox Katana S Mini Wireless Mechanical Keyboard, showcasing its compact 68-key layout and rainbow backlighting.

1. Ntọlite ​​na mbido ojiji

Ihe ngwugwu 1.1

• EvoFox Katana S Mini Wireless Mechanical Keyboard
• Eriri USB-C gaa na USB-A (maka njikọ waya na chaja)
• 2.4GHz USB nnata
• Onye na-adọkpụ igodo
• Gbanwee Puller
• 4 x Extra Jixian Red Switches
• Akwụkwọ ntuziaka (akwụkwọ a)

1.2 Ịchaji ahụigodo

Before first use, it is recommended to fully charge the keyboard. Connect the provided USB-C cable to the keyboard's USB-C port and the other end to a USB power source (e.g., computer USB port, USB wall adapter). The keyboard's indicator light will show charging status and turn off when fully charged.

1.3 Ụdị Njikọta

The EvoFox Katana S Mini supports three connectivity modes: Wired, 2.4GHz Wireless, and Bluetooth (up to 3 devices).

Image: The keyboard connected to multiple devices (laptop, tablet, phone) via its triple-mode connectivity options: Bluetooth, 2.4GHz USB, and wired USB.

1.3.1 Ụdị Waya

• Connect the USB-C cable to the keyboard and the USB-A end to your computer.
• Ahụigodo ahụ ga-agbanwe na akpaghị aka gaa na ọnọdụ waya.
• This mode also charges the keyboard.

1.3.2 2.4GHz Wireless Mode

• Locate the 2.4GHz USB receiver (usually stored in a compartment on the keyboard or packaging).
• Tinye eriri USB 2.4GHz n'ọdụ ụgbọ mmiri dị na kọmputa gị.
• Turn on the keyboard using the power switch (located on the back or side).
• Pịa Fn + R. ịgbanwe gaa na ọnọdụ 2.4GHz. Ọkụ ihe ngosi ga-akwado njikọ ahụ.

1.3.3 Bluetooth Mode (BT1, BT2, BT3)

The keyboard can pair with up to three Bluetooth devices.

• Gbanwuo ahụigodo site na iji mgba ọkụ.
• Pịa Fn + Q, Fn + W, ma ọ bụ Fn + E to select a Bluetooth channel (BT1, BT2, or BT3). The corresponding key will flash rapidly, indicating pairing mode.
• On your device (computer, tablet, phone), enable Bluetooth and search for "EvoFox Katana S Mini".
• Select the keyboard to pair. Once connected, the key will stop flashing and remain steadily lit for a few seconds.
• Ka ịgbanwee n'etiti ngwaọrụ Bluetooth ejikọtara, pịa Fn + Q, Fn + W, ma ọ bụ Fn + E.

2. Ntuziaka ọrụ

2.1 Ọrụ igodo isi

The keyboard features a compact 68-key layout. Many functions are accessed using the Fn igodo jikọtara ya na igodo ndị ọzọ.

Image: A close-up of the keyboard highlighting keys with secondary functions, such as multimedia controls, screenshot, and CoPilot, accessed via the Fn key.

• Fn + Q/W/E: Gbanwee n'etiti ngwaọrụ Bluetooth (BT1, BT2, BT3).
• Fn + R.: Switch to 2.4GHz wireless mode.
• Fn + T: Switch to Wired mode (if cable is connected).
• Fn + Mmeri: Lock/Unlock the Windows key.
• Ịpị mpịakọta: Rotate right to increase volume, rotate left to decrease volume.

Njikwa ọkụ azụ 2.2

The keyboard features rainbow backlighting with 18 dynamic lighting effects.

Foto: Akụkụ view of the EvoFox Katana S Mini keyboard showcasing its vibrant rainbow backlighting effects.

• Fn + akụ elu: Mụbaa nchapụta azụ azụ.
• Fn + akụ ala: Belata nchapụta ọkụ azụ.
• Fn + \| (Backslash): Gagharịa site na ụdị ọkụ azụ azụ iri na isii dị iche iche.
• Fn + Ụka aka ekpe: Decrease backlight effect speed.
• Fn + Akụ aka nri: Increase backlight effect speed.

2.3 Gaming Performance Features

• Ọnụego ntuli aka 1000Hz: Ensures rapid response times in Wired and 2.4G modes.
• All-Key Anti-Ghosting: Prevents missed key presses during rapid input in Wired and 2.4G modes. (Note: Anti-ghosting is limited to 6 keys in Bluetooth mode).

Image: The keyboard displayed with icons indicating its 1000Hz polling rate, low latency, N-key rollover (anti-ghosting), and rechargeable battery.

3. Nlekọta

3.1 Ihicha ahụigodo

• Turn off the keyboard and disconnect it from all devices.
• Jiri akwa dị nro na-enweghị ntụpọ dampejiri mmiri tinye ma ọ bụ ihe ngwọta dị nro iji hichaa igodo igodo na chassis.
• Maka uzuzu na irighiri ihe n'etiti igodo, jiri ikuku abịakọrọ.
• Zere iji kemịkalụ siri ike ma ọ bụ ihe na-emebi emebi.

3.2 Replacing Switches and Keycaps

The EvoFox Katana S Mini features hot-swappable Jixian Red switches, allowing for easy replacement without soldering.

Image: A close-up of the keyboard showing a removed keycap and switch, with spare switches and keycaps nearby, illustrating the hot-swappable feature.

3.2.1 Removing Keycaps

• Use the provided keycap puller to gently grip the keycap you wish to remove.
• Pull straight up with even pressure until the keycap detaches.

3.2.2 Removing Switches

• After removing the keycap, use the provided switch puller.
• Position the switch puller's prongs onto the two clips on the top and bottom of the switch housing.
• Squeeze the clips and gently pull the switch straight up.

3.2.3 Installing Switches and Keycaps

• Align the pins of the new switch with the holes on the PCB. Ensure the switch is oriented correctly.
• Gently push the switch down until it clicks into place. Do not force it.
• Place the desired keycap onto the switch stem and press down firmly until it is secure.

4. Nchọpụta nsogbu

5. Nkọwapụta ngwaahịa

6. Akwụkwọ ikike Ozi

EvoFox products typically come with a limited manufacturer's warranty. Please refer to the warranty card included with your product or visit the official EvoFox website for specific warranty terms and conditions, including duration and coverage details. Keep your purchase receipt as proof of purchase for warranty claims.

7. Nkwado ndị ahịa

For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact EvoFox customer support through the following channels:

• Ndị ọchịchị Websaịtị: Gaa leta EvoFox Store on Amazon or the official EvoFox brand websaịtị maka akụrụngwa nkwado na ozi kọntaktị.
• Nkwado email: Rụtụ aka na nkwakọ ngwaahịa gị ma ọ bụ onye ọrụ gọọmentị webebe nrụọrụ weebụ maka adreesị ozi-e nkwado ndị ahịa.
• Nkwado ekwentị: Rụtụ aka na nkwakọ ngwaahịa gị ma ọ bụ onye ọrụ gọọmentị websaịtị maka nọmba ekwentị nkwado ndị ahịa.

When contacting support, please have your product model name (Katana S Mini) and purchase details ready.