1. Okwu mmalite
This manual provides detailed instructions for the assembly, operation, and maintenance of your Rfiver Swivel Floor TV Stand. Please read this manual thoroughly before installation and use to ensure safe and correct operation. Keep this manual for future reference.
Image 1: Rfiver Swivel Floor TV Stand with a television mounted.
2. Ozi nchekwa
Always follow these safety precautions to prevent injury or damage to your product and property:
- Ike ibu: Agafela ikike ịdị arọ kacha nke 88 lbs (40 n'arọ). Emebere ntọala a maka TV n'etiti 32 na 60 inch.
- Ndakọrịta VESA: Ensure your TV's VESA mounting pattern is within the supported range of 100x100mm to 400x400mm.
- Elu nke kwụsiri ike: Place the TV stand on a flat, level, and stable surface to prevent tipping.
- Ụmụaka na anụ ụlọ: Keep children and pets away from the TV stand during assembly and ensure the TV is securely mounted to prevent accidental falls.
- Mgbakọ: Assemble the stand according to the instructions. Do not modify the product or use it for purposes other than its intended use.
- Njikwa USB: Route all cables neatly to prevent tripping hazards and to avoid damage to the cables.
3. Ihe ngwugwu
Before assembly, verify that all parts are present and undamaged. Refer to the included parts list and hardware pack in your product packaging. If any parts are missing or damaged, contact customer service immediately.
4. Ntọala na Mgbakọ Ntuziaka
Assembly typically takes approximately 15 minutes. No drilling is required. Follow these steps carefully:
- Wepu akụrụngwa: Jiri nlezianya wepụ akụkụ niile dị na ngwugwu ahụ ma tinye ha n'elu dị nro ma dị ọcha iji gbochie ọkọ.
- Kpọkọta ntọala: Attach the main support pole to the wooden base using the provided screws and tools. Ensure all connections are secure.
- Install TV Brackets: Attach the vertical TV brackets to the back of your television using the appropriate screws and spacers from the hardware kit. Ensure the brackets are centered and securely fastened to your TV's VESA mounting holes.
- Wụnye TV iji guzoro: Carefully lift the television and hook the TV brackets onto the mounting plate of the stand. Secure the TV in place with the safety screws or locking mechanisms provided.
- Adjust Height (Initial): Before final placement, adjust the TV to your desired initial height setting. Refer to the 'Operating Instructions' section for details on height adjustment.
- Njikwa USB: Use the integrated cable management clips or channels to route and conceal TV cables for a tidy appearance and to prevent hazards.
Image 2: Illustration of the stable base foot support design, highlighting its stability compared to other designs.
Foto 3: nso nso view of the base feet support, designed to prevent tilting.
5. Ntuziaka ọrụ
5.1 Ọrụ ntụgharị
The Rfiver Swivel Floor TV Stand allows for a 70-degree swivel range, 35 degrees left and 35 degrees right. This feature enables optimal viewing angles from various positions in your room.
- To swivel the TV, gently grasp the sides of the television and rotate it to the desired angle.
- Avoid forcing the swivel beyond its intended range to prevent damage.
Image 4: The TV stand offers a 70-degree swivel for flexible viewing.
Image 5: The swivel function allows for comfortable viewing from different seating arrangements.
5.2 Ndozi elu
The TV stand features 3 height settings, adjustable in 1.97-inch (50 mm) increments, providing a total of 5.9 inches of vertical adjustability. This allows you to position your TV at an ergonomic eye level.
- To adjust the height, carefully lift the TV mounting bracket to disengage it from its current position.
- Slide the bracket up or down to the desired height slot.
- Ensure the bracket is securely seated in the chosen slot before releasing TV.
Image 6: Visual representation of the 3-level height adjustment for optimal eye-level comfort.
Image 7: Detailed diagram of the three adjustable height levels.
6. Nlekọta
Regular maintenance ensures the longevity and safe operation of your TV stand:
- Nhicha: Jiri ákwà dị nro ma kpọọ nkụ hichaa ihe ndobe ahụ. Maka akara siri ike, jiri obere d hichaa ya.amp ákwà na ihe nhicha dị nro, wee kpoo ya nke ọma. Zere ihe nhicha ma ọ bụ ihe mgbaze.
- Nyocha: Na-elele skru na njikọ niile mgbe niile iji hụ na ha siri ike ma sie ike. Mee ka ọ sie ike ma ọ dị mkpa.
- Njikwa USB: Ensure cables are still neatly managed and not pinched or damaged.
7. Nchọpụta nsogbu
Ọ bụrụ na ị na-enwe nsogbu ọ bụla, rụtụ aka na nsogbu na ngwọta ndị a na-emekarị:
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Ebe a na-edebe TV na-adị ka ihe na-adịghị mma ma ọ bụ na-ama jijiji. | Skrọ ndị ahụ dị nro; ihe nkwụnye ahụ dị n'elu ebe na-adịghị nhata; ibu TV karịrị ikike ya. | Check and tighten all assembly screws. Move the stand to a level surface. Verify TV weight is within 88 lbs limit. |
| TV does not fit the mounting plate. | Incorrect VESA pattern; TV size outside recommended range. | Confirm your TV's VESA pattern is between 100x100mm and 400x400mm. Ensure TV size is between 32-60 inches. |
| Ihe isi ike dị na ịtụgharị TV. | Obstruction; mechanism needs lubrication. | Check for any objects blocking the swivel path. Apply a small amount of silicone-based lubricant to the swivel mechanism if necessary. |
8. Nkọwapụta
Key specifications for the Rfiver Swivel Floor TV Stand:
- Nha TV dakọtara: 32 ruo 60 sentimita asatọ
- Oke ibu kacha: 88 lbs (40 n'arọ)
- Ndakọrịta VESA: 100x100mm to 400x400mm (Horizontal x Vertical)
- Oke Swivel: 70 degrees (35 degrees left, 35 degrees right)
- Ndozi elu: 3 levels, 1.97 inch (50 mm) increments, 5.9 inches total adjustability
- Ntọala Ntọala: 16.7 x 12.7 x 1 inches (Wood Panel)
- Ihe: Alloy Steel, Wood
- Arọ ngwaahịa: Ihe dịka 13.95 lbs
- Agba: Ọcha
Image 8: Compatibility details for TV size, weight, and VESA mounting patterns.
Image 9: Detailed compatibility information for various TV types.
9. Akwụkwọ ikike na nkwado
For warranty information or technical support, please contact Rfiver customer service. Refer to the contact details provided with your product packaging or visit the official Rfiver website. Please have your model number (B0F42XVT8C) and purchase date available when contacting support.
