M5Stack Cardputer v1.1

M5Stack Official Cardputer with M5stampS3 v1.1 Development Kit User Manual

Brand: M5Stack | Model: Cardputer v1.1

1. Okwu mmalite

This manual provides essential information for the M5Stack Official Cardputer with M5stampS3 v1.1 Development Kit. It covers product features, setup instructions, operational guidelines, maintenance tips, and technical specifications to ensure proper use and functionality.

M5Stack Cardputer v1.1 Development Kit

Image 1.1: The M5Stack Cardputer v1.1 Development Kit, a compact, card-sized computer with a full QWERTY keyboard and integrated M5stampS3 microcontroller.

2. Ọdịnaya na Ntọala Ngwugwu

2.1. Kedu ihe dị na Igbe ahụ

  • Cardputer v1.1 x 1
  • L-shaped hex wrench 1.5mm (for M2 screws) x 1
M5Stack Cardputer and hex wrench

Image 2.1: The Cardputer v1.1 and the included hex wrench for potential assembly or maintenance.

2.2. Mmalite Ike na Nhazi

  1. Njikọ ike: Connect the Cardputer to a power source using the USB-C port. The device includes a 1400mAh battery.
  2. Ntinye kaadị SD: For optimal use, insert a Micro SD card (32GB or less recommended) into the designated slot.
  3. Firmware: The device comes with pre-installed firmware. To explore additional functionalities or custom applications, consider installing the M5 Launcher or M5Stack Burner. Refer to the official M5Stack website for detailed instructions and available firmware.

3. Akụrụngwa Kwụsịrịview

The Cardputer v1.1 integrates several components into a compact form factor.

Labeled diagram of M5Stack Cardputer v1.1 features

Image 3.1: Key external features of the Cardputer v1.1, including the 1.14" IPS-LCD, 56-key keyboard, microphone, speaker, and M5stampS3 modul.

3.1. Isi ihe

  • Igwe njikwa: M5stampS3 (ESP32-S3)
  • Ngosipụta: 1.14-inch IPS-LCD (ST7789V2, 240x135 pixels)
  • Ntinye: 56-key QWERTY keyboard, PDM-MIC@SPM1423 (microphone)
  • Mpụta: I2S-Speaker@NS4168 (1W speaker)
  • Njikọta: Wi-Fi, Bluetooth, Grove port (G5V G2 G1), Micro SD card slot, USB-C
  • Ike: Internal 120mAh battery, additional 1400mAh battery in the backpack module.
  • Ndị ọzọ: IR G44 (infrared), Magnet, Button RST (reset), Button GO.
Ime view of M5Stack Cardputer v1.1 board with labeled components

Foto 3.2: Ihe dị n'ime view of the Cardputer's main board, highlighting the M5stampS3, IPS-LCD, and various connection points.

3.2. Akụkụ anụ ahụ

The device measures approximately 84mm (3.3in) in length, 54mm (2.1in) in width, and 19.7mm (0.77in) in thickness, with a weight of approximately 90.0 grams.

M5Stack Cardputer v1.1 with dimensions labeled

Image 3.3: Physical dimensions of the M5Stack Cardputer v1.1.

4. Operating the Cardputer

4.1. Keyboard and Screen Interaction

The Cardputer features a 56-key QWERTY keyboard for text input and command execution. The 1.14-inch IPS-LCD provides visual feedback and interface navigation.

Close-up of M5Stack Cardputer v1.1 screen and keyboard

Foto 4.1: nkọwa zuru ezu view of the Cardputer's screen and keyboard, showing key layout and display clarity.

4.2. Basic Functions and Applications

The Cardputer is designed for various development and learning applications. Depending on the loaded firmware, it can perform tasks such as:

  • Wi-Fi scanning and network analysis
  • Ọrụ ngụ oge
  • System hardware tests (e.g., display, microphone, speaker, gyroscope)
  • Infrared remote control capabilities
  • Nkwukọrịta Bluetooth Low Energy (BLE).
  • Embedded system development and learning
  • Industrial control and automation
  • Home control systems
  • Wireless communication and IoT projects
M5Stack Cardputer v1.1 screen displaying various functions

Image 4.2: The Cardputer's screen interface, showing options for Wi-Fi scan, record, chat, and other functions.

4.3. Ọdụ Njikọta

The device offers multiple connectivity options for expansion and interaction:

  • Grove Port: For connecting M5Stack's ecosystem of modules and sensors.
  • Oghere kaadị Micro SD: For external storage.
  • Ọdụ USB-C: For power, data transfer, and programming.
Akụkụ view of M5Stack Cardputer v1.1 with Grove port

Foto 4.3: Akụkụ view showing the Grove port for external module connections.

Akụkụ view of M5Stack Cardputer v1.1 with Micro SD card slot

Foto 4.4: Akụkụ view showing the Micro SD card slot for expandable storage.

5. Nkọwapụta

NjirimaraNkọwa
SoCESP32-S3@Xtensa LX7 Wi-Fi, USB-OTG function
Flash16MB Flash
PSRAM8MB PSRAM
Wi-Fi802.11 b/g/n (2.4 GHz Wi-Fi)
Metụ akaFT6336U@capacitive touch, touch area pixels 320 x 280 (Note: Product description states 1.14" IPS-LCD 240x135, this touch spec might be for a different model or general capability)
Ihuenyo LCD1.14"@240 x 135 ILI9342C, SPI communication
Chip njikwa ikeAXP2101
RTCBM8563
Onye nrụpụta CPUEspressif
Ọnụọgụ nke Nhazi2
RAMLPDDR4
Sistemụ nrụọrụLinux (Note: This is a general capability, specific firmware may vary)
Ibu Ibu3.52 ounces
Akụkụ ngwugwu5.63 x 3.58 x 0.91 sentimita asatọ
Batrị1 Batrị na-abụghị ọkọlọtọ (gụnyere)

6. Nlekọta

6.1. Nlekọta batrị

The Cardputer contains an internal 120mAh battery and an additional 1400mAh battery in the backpack module. To prolong battery life:

  • Zere oke okpomọkụ.
  • Charge the device regularly, but avoid overcharging or completely draining the battery for extended periods.
  • Jiri eriri USB-C enyere maka ịchaji.
Gbawara view of M5Stack Cardputer v1.1 showing internal battery

Foto 6.1: Ihe gbawara view illustrating the internal battery component of the Cardputer.

6.2. Nhicha

Use a soft, dry cloth to clean the device. Avoid using harsh chemicals or abrasive materials that could damage the screen or casing.

7. Nchọpụta nsogbu

If you encounter issues with your Cardputer, consider the following general troubleshooting steps:

  • Okwu ike: Ensure the device is fully charged or connected to a stable power source.
  • Ngwaọrụ anaghị anabata: Try pressing the Reset button (BtnRst) or power cycling the device using the ON/OFF switch.
  • Firmware Related: If a specific function is not working, it might be related to the installed firmware. Check the M5Stack official documentation for firmware updates or alternative firmware options.
  • Njikọta: Verify all physical connections (USB-C, Grove, SD card) are secure.

For more detailed troubleshooting guides and community support, visit the official M5Stack websaịtị: m5stack.com. Navigate to the 'DOCUMENT' section and search for your product model to find tutorials and resources.

8. Akwụkwọ ikike na nkwado

The M5Stack Cardputer v1.1 Development Kit is covered by the manufacturer's standard warranty. For specific warranty terms, technical support, or service inquiries, please refer to the official M5Stack website or contact their customer service directly. Additional protection plans may be available from your retailer.

Akwụkwọ ndị emetụtara - Cardputer v1.1

Tupuview M5Stack Cardputer V1.1: Portable Computer and Development Platform Guide
Comprehensive guide to the M5Stack Cardputer v1.1, a high-performance portable computer for engineers and developers. Features StampS3A controller, 56-key keyboard, 1.14-inch TFT screen, MEMS microphone, and extensive connectivity. Includes setup instructions, FAQs, specifications, and development platform details.
Tupuview Kaadị M5STACK: Kọmputa Mmepe ESP32-S3 enwere ike ibugharị
Chọgharịa M5STACK Cardputer, kọmpụta mmepe kọmpat na nke na-egosipụta mgbawa ESP32-S3FN8, ahụigodo igodo 56, ihuenyo TFT, yana njikọta sara mbara maka prototyping ngwa ngwa na ọrụ agbakwunyere.
Tupuview M5Stack Cardputer V1.1 Ntuziaka onye ọrụ na femụwe ọkụ
Ntuziaka zuru oke maka M5Stack Cardputer V1.1, na-ekpuchi ụlọ ọrụ mmepụta ihe na-egbuke egbuke, na-edozi nsogbu ndị a na-ahụkarị dị ka ihuenyo ojii, na ntinye USB ọkwọ ụgbọala site na iji M5Burner. Mụta ka esi akwado, wụnye ndị ọkwọ ụgbọ ala, họrọ ọdụ ụgbọ mmiri, wee gbaa ngwa ngwa maka ngwaọrụ gị.
Tupuview M5STACK Dinmeter: Ngwaahịa gafereview na Ntuziaka mmalite ngwa ngwa
Ntuziaka zuru oke na M5STACK Dinmeter, bọọdụ mmepe agbakwunyere nke M5St kwadoro.ampS3. Features include a 1.14-inch screen, rotary encoder, and extensive connectivity. Learn about its specifications and how to perform WiFi and BLE scans with Arduino IDE.
Tupuview M5STACK STAMPAkwụkwọ data S3 na nkọwa nka nka
Nyochaa M5STACK STAMPbọọdụ mmepe S3, na-egosipụta mgbawa ESP32-S3 nwere Wi-Fi na Bluetooth 5 (LE). Mpempe akwụkwọ data a na-akọwa ihe mejupụtara ngwaike ya, nkọwa ntụtụ, ike ịrụ ọrụ, yana njirimara eletrik maka ọrụ IoT.
Tupuview M5Stack AtomS3-Lite ESP32-S3 Board Development
Chọgharịa M5Stack AtomS3-Lite, kọmpat ESP32-S3 mmepe bọọdụ na-egosipụta Wi-Fi, antenna agbakwunyere, yana oghere dị iche iche maka ọrụ IoT na microcontroller. Mụta maka nkọwapụta ya, atụmatụ ya na nhọrọ mmepe ya na Arduino IDE na UiFlow2.