SYNCO Xvision Video Transmission System User Manual

1. Ngwaahịa gafereview

The SYNCO Xvision Video Transmission System provides stable and high-quality wireless video transmission for professional filming, live streaming, and TVC production. This system includes one transmitter (TX) and one receiver (RX), designed for real-time monitoring with ultra-low latency.

Figure 1.1: SYNCO Xvision Video Transmission System (1 TX and 1 RX) and included USB-C cables.

Akụkụ ndị bụ isi:

• Superior Signal Penetration: Stable 1080P/60fps video transmission over long distances (up to 300m) using SYNCO's ultra-penetration technology.
• Ọnwụ anwụ dị ala: Achieves a 40ms latency for precise real-time feedback, crucial for dynamic shooting environments.
• Low Power Design: Utilizes advanced low-power chips and intelligent power management, consuming only 2W, ensuring quiet and efficient operation without fan cooling.
• All-in-One Assistive App (SYNCO Link): Supports real-time monitoring, image adjustments (zebra stripes, mirror, inverse colors), video saving, screenshot, and playback functions.
• Smart Design, Easy Operation: Features a 1.47-inch large display for real-time device status, intuitive button layout, and automatic pairing memory.
• Nhọrọ ike na-agbanwe agbanwe: Supports NP-F battery (7.4-8.4V) and USB-C power input (5V 2A) for versatile use.
• Kọmpat ma dị fechaa: Weighs only 119g with foldable antennas, making it highly portable.

2. Kedu ihe dị na Igbe ahụ

• 1 x nnyefe (TX)
• 1 x onye nnata (RX)
• 1 x Ụdị-C USB

Figure 2.1: Included components: Transmitter, Receiver, and Type-C Cable.

3. Nhazi ngwaọrụ na ọdụ ụgbọ mmiri

Familiarize yourself with the various components and connection points of the SYNCO Xvision units.

Foto 3.1: Akụkụ view of the unit highlighting the Power Switch, Pairing Button, and 5V IN USB-C Port.

Figure 3.2: HDMI ports on the Transmitter (HDMI IN, HDMI OUT/Loop Out) and Receiver (2x HDMI OUT).

• Ike mgba ọkụ: Used to turn the device On or Off.
• Kachasị Button: Initiates the pairing process between units.
• USB-C Port (5V IN): Maka ọkọnọ ike.
• HDMI IN (Transmitter): Connects to the video source (e.g., camera).
• HDMI OUT (Transmitter - Loop Out): Allows for local monitoring of the input signal.
• HDMI OUT (Receiver): Connects to display monitors. The receiver has two HDMI OUT ports.
• Mpi: Foldable antennas for signal transmission and reception.

4. Ntọlite ​​na mbido mbụ

4.1 Ịkwanye ngwaọrụ

The SYNCO Xvision system offers flexible power options:

• Batrị NP-F: Insert a compatible NP-F battery (7.4-8.4V) into the battery slot. Press the lock button to slide the battery in or out.
• Ike USB-C: Connect a 5V 2A power source to the USB-C port.

Figure 4.1: Attaching an NP-F battery to the unit.

Figure 4.2: Powering the unit via USB-C cable.

4.2 Unfolding Antennas

Before operation, gently unfold the antennas on both the transmitter and receiver units to ensure optimal signal performance.

Figure 4.3: Unfolding the antenna for operation.

4.3 Gbanyụọ ma ọ bụ gbanyụọ

To power on the device, slide the power switch down. To power off, slide the switch up. The device will automatically reconnect to a previously paired device upon startup.

4.4 Pairing the Units

The transmitter (TX) and receiver (RX) units typically come pre-paired. If re-pairing is necessary or for pairing additional receivers:

1. Hụ na e tinyere ma transmitter na receiver n'ọrụ.
2. Long press the pairing buttons on both the transmitter and receiver for 5 seconds to enter pairing mode.
3. Once paired, the screen will display "Paired".

Note: A single transmitter supports up to 4 receivers (including RX and APP monitoring devices). The device will exit pairing mode if no device is found within 90 seconds. Pair receivers one at a time.

4.5 Connecting to Equipment

1. Connect the HDMI cable from your camera or video source to the HDMI n'ime ọdụ ụgbọ mmiri na transmitter.
2. Connect an HDMI cable from the receiver's HDMI pụọ port to your monitor's HDMI n'ime ọdụ ụgbọ mmiri.

Figure 4.4: Transmitter connected to a camera.

Figure 4.5: Receiver connected to a monitor.

5. Na-arụ ọrụ Sistemu

5.1 Monitoring Display

The 1.47-inch display on both units provides real-time status information, including:

• Transmitter (TX) / Receiver (RX) status
• Ọkwa njikọ WiFi
• Connection signal strength
• Ọkwa ike
• Resolution (e.g., 1080P)
• Frame Rate (e.g., 60fps)
• Bitstream (e.g., 1Mbps)

Figure 5.1: Display indicators for operational status.

5.2 Using the SYNCO Link App

The SYNCO Link App enhances your monitoring experience with additional features:

• Real-time monitoring on your smart device.
• Precise image adjustments (zebra stripes, mirror, inverse colors).
• Built-in video saving, screenshot, and playback functions.

Refer to the SYNCO Link App manual for detailed instructions on connecting and using the app.

5.3 Multi-User Monitoring

The system supports simultaneous wired and wireless transmission, enabling efficient collaboration. Real-time monitoring across multiple devices is ideal for directors, lighting designers, makeup artists, and art directors.

Figure 5.2: Multi-user monitoring setup.

6. Nlekọta

• Keep the units clean and free from dust and debris. Use a soft, dry cloth for cleaning.
• Zere ikpughe ngwaọrụ ndị ahụ na oke okpomọkụ, iru mmiri, ma ọ bụ ìhè anyanwụ kpọmkwem.
• Store the units in a dry, cool place when not in use.
• Ensure all cables are properly connected and not strained.
• Regularly check for firmware updates from the manufacturer's official website to ensure optimal performance and compatibility.

7. Nchọpụta nsogbu

8. Nkọwapụta

9. Official Product Video

Watch the official product video for a visual guide on unboxing, product introduction, power options, ports, and operational procedures.

10. Akwụkwọ ikike na nkwado

For warranty information, technical support, or service inquiries, please refer to the official SYNCO websaịtị ma ọ bụ kpọtụrụ ndị ahịa ha ozugbo. Debe akwụkwọ nnata ịzụrụ maka akwụkwọ ikike.