CYCLAMI CY110 Smart Brake Sensing Bicycle Taillight User Manual

1. Okwu mmalite

Thank you for choosing the CYCLAMI CY110 Smart Brake Sensing Bicycle Taillight. This manual provides essential information for the proper installation, operation, and maintenance of your new taillight. Please read it thoroughly before use to ensure optimal performance and safety.

The CYCLAMI CY110 is designed to enhance your visibility and safety during cycling, featuring smart brake sensing, multiple lighting modes, and a durable, waterproof design.

2. Ngwaahịa gafereview

2.1 Atụmatụ

• Nchọpụta Brekị Smart: Automatically increases brightness upon deceleration to alert following traffic.
• Ihe mgbochi mmiri IPX6: Designed to withstand heavy rain and splashes, ensuring reliable performance in various weather conditions.
• Nchaji ụdị-C: Convenient and fast charging via a modern USB Type-C port.
• Igwe ọkụ dị elu: Provides 60 lumens of light output for excellent visibility.
• Intelligent Sleep & Wakeup: Features a motion sensor that puts the light into hibernation when stationary and wakes it up upon movement, conserving battery.
• Ụdị ọkụ ọtụtụ: Offers various modes to suit different riding conditions and preferences.
• Kọmpat ma dị fechaa: Weighs only 24g (light only) for minimal impact on your bike's weight.

2.2 Kedu ihe dị na igbe ahụ

• CYCLAMI CY110 Bicycle Taillight
• Arịọnụ mgbodo
• Eriri Nchaji Ụdị USB-C (edeghị aha ya nke ọma mana e gosipụtara ya site na Nchaji Ụdị-C)

Figure 1: The compact design of the CYCLAMI CY110 taillight.

3. Nhazi

3.1 Mounting the Taillight

1. Identify a suitable location on your bicycle's seat post. The mounting bracket is designed for seat post installation.
2. Secure the mounting bracket to the seat post using the provided elastic band. Ensure the bracket is firmly attached and angled correctly so the light will face directly backward.
3. Align the taillight with the grooves on the mounting bracket.
4. Insert the taillight into the bracket and rotate it 90 degrees until it locks securely into place. There are two nubs in the mount that engage with recessed areas on the light.

Figure 2: The CYCLAMI CY110 taillight securely mounted on a bicycle seat post.

3.2 Ụgwọ mbụ

Before first use, it is recommended to fully charge the taillight. Refer to the 'Charging' section for detailed instructions.

4. Ntuziaka ọrụ

4.1 Gbanyụọ ma ọ bụ gbanyụọ

• To turn on the taillight, pịa ma jide bọtịnụ ike maka 2 sekọnd.
• To turn off the taillight, pịa ma jide bọtịnụ ike maka 2 sekọnd ọzọ.

4.2 Switching Lighting Modes

Once the taillight is on, pịa bọtịnụ ike to cycle through the available lighting modes. The CY110 features four-position mode adjustment. The specific modes may include constant, various flashing patterns, and breathing flash.

Figure 3: High brightness LED and mode adjustment by pressing the power button.

4.3 Smart Brake Sensing Function

The taillight is equipped with a smart sensor that detects deceleration. When braking or slowing down, the light will automatically increase its brightness by approximately 20% for 5 seconds to provide a clear warning to vehicles behind you. This feature is most noticeable and effective in flashing or breathing modes. In constant-on mode, the brightness boost may be less apparent.

Figure 4: The taillight senses braking and increases brightness for 5 seconds.

4.4 Intelligent Sleep and Vibration Wakeup

To conserve battery, the taillight features an intelligent sleep mode:

• If the bicycle remains stationary for 30 sekọnd, the taillight will enter a dormant (hibernation) state.
• Upon detecting vibration or movement, the light will automatically wake up and resume its previous lighting mode.
• If the light remains in the dormant state for 30 nkeji without any movement, it will perform a forced shutdown to completely power off. To reactivate, you will need to long-press the power button.

Figure 5: Taillight enters dormant mode after 30 seconds of inactivity and wakes up with vibration.

5. Ịchaji

The CYCLAMI CY110 taillight is equipped with a Type-C charging port for convenient recharging.

1. Locate the Type-C charging port on the taillight, usually protected by a rubber cover.
2. Gently open the rubber cover to expose the port.
3. Connect the provided USB Type-C cable to the taillight and the other end to a standard USB power source (e.g., computer, wall adapter, power bank).
4. The light will indicate charging status (e.g., flashing while charging, solid when fully charged).
5. Once fully charged, disconnect the cable and securely close the rubber cover to maintain water resistance.

Ndụ batrị:

• Always-on mode: Approximately 3.5 hours
• Other modes: Approximately 6 hours

Figure 6: Charging the taillight using the Type-C port.

6. Nlekọta

6.1 Nhicha

Wipe the taillight with a soft, damp cloth to remove dirt and dust. Avoid using harsh chemicals or abrasive materials that could damage the casing ma ọ bụ lensị.

6.2 Mmiri Nguzogide

The CY110 has an IPX6 waterproof rating, meaning it is protected against high-pressure water jets from any direction. It is safe for use in heavy rain. However, it is not designed for prolonged immersion in water. Ensure the Type-C charging port cover is securely closed to maintain water resistance.

Figure 7: The taillight is IPX6 waterproof and weather resistant.

6.3 Nchekwa

When not in use for extended periods, store the taillight in a cool, dry place. It is advisable to charge the battery periodically (e.g., every 3-6 months) to maintain battery health.

7. Nchọpụta nsogbu

• Ìhè anaghị agbanwu:
  Ensure the battery is charged. Press and hold the power button for 2 seconds to turn it on.
• Brake sensing not working as expected:
  The brake sensing feature is most noticeable in flashing or breathing modes. In constant-on mode, the brightness increase is subtle. Ensure the light is securely mounted and not obstructed.
• Ìhè na-agbanyụ na mberede:
  The taillight features an intelligent sleep mode. If stationary for 30 seconds, it enters hibernation. After 30 minutes of inactivity, it performs a forced shutdown. Simply move the bike to wake it up, or long-press the power button if it has fully shut down.
• Ntinye mmiri:
  Ensure the Type-C charging port cover is fully sealed after charging. While IPX6 rated, prolonged immersion is not recommended.

8. Nkọwapụta

9. Akwụkwọ ikike na nkwado

For warranty information and customer support, please refer to the documentation provided with your purchase or contact your retailer. Keep your proof of purchase for any warranty claims.