Orbit 67100 1/4" Barb Drip Irrigation Multi-Stream Emitter Instruction Manual

Okwu mmalite

The Orbit 67100 Multi-Stream Drip Emitter is designed for precise micro-watering in various garden settings. It delivers a gentle, full-pattern multi-stream spray, ideal for annuals, shrubs, perennials, or container plants. This emitter allows for adjustable water flow to suit specific plant needs and conserve water.

Ngwaahịa gafereview

The multi-stream drip emitter features a 1/4-inch barb inlet for direct connection to 1/4-inch drip tubing. It also includes a 10-32 male thread (MT) for optional connection to drip stakes. The emitter's head is adjustable, allowing users to control the spray radius and flow rate.

Image: The Orbit 67100 Multi-Stream Drip Emitter, a black plastic component with a ribbed top and a barb connection at the bottom. The top surface shows markings for flow adjustment.

Akụkụ ndị bụ isi:

• Precise micro-watering for various plants.
• Multiple streams provide gentle flow for efficient soak-in.
• Adjustable flow control to customize water application rates.
• Dual connection options: 10-32 male thread and 1/4-inch barb.
• Compatible with B-hyve smart controllers for water conservation.

Ntọala na nwụnye

1. Kwadebe Tubing: Ensure your 1/4-inch drip tubing is cut to the desired length and free of debris.
2. Connect to Tubing: Push the 1/4-inch barb inlet of the emitter directly into the end of the 1/4-inch drip tubing. For easier insertion, you may briefly warm the end of the tubing in warm water.
3. Optional Drip Stake Connection: If using a drip stake, connect the 10-32 male thread of the emitter to a drip stake with a 10-32 female thread.
4. Nkwanye: Position the emitter near the base of the plant you wish to water. Use a drip tubing Y-anchor stake if needed to secure the emitter in place.
5. Water Source Connection: Connect the 1/4-inch drip tubing to your main drip manifold, a 1/2-inch drip tubing lateral line, or directly to a hose faucet using a 1/4-inch hose faucet adapter.
6. Nyochaa sistemụ: Before final operation, briefly turn on the water supply to check for leaks and proper emitter function.

Ntuziaka ọrụ

The Orbit 67100 Multi-Stream Drip Emitter allows for easy adjustment of water flow and spray radius.

Ịgbanwe Mmiri Na-asọ:

The top of the emitter features a rotating head with markings for adjustment. To decrease the spray radius and water flow, rotate the multi-stream head clockwise towards the "minus" symbol. To increase the spray radius and water flow, rotate the head counter-clockwise towards the "plus" symbol. You can also shut off the flow completely by rotating it fully clockwise.

The recommended operating pressure for this emitter is 30 PSI. For optimal water conservation, consider integrating the system with an Orbit B-hyve smart controller.

Nlekọta

• Nyocha oge niile: Periodically check emitters for clogs or damage.
• Nhicha: If an emitter becomes clogged, gently remove it from the tubing and rinse it under running water. A small brush can be used to clear any debris from the nozzles.
• Oge oyi: In freezing climates, disconnect and drain your irrigation system, including emitters, to prevent damage from ice expansion.

Nchọpụta nsogbu

Nkọwapụta

• Ụdị: 67100
• Akara: Orbit
• Ihe: Plastic
• Agba: Nwa
• Inlet Type: 1/4" Barb and 10-32 Male Thread (MT)
• Ụdị ịgbasa: Multi-Stream, Full Pattern
• Maximum Spray Radius: Up to 3 feet (at 30 PSI)
• Nrụgide ịrụ ọrụ arụ ọrụ: 30 PSI
• Akụkụ (L x W x H): 1 x 1 x 1 sentimita asatọ
• Ibu ihe: 1 pounds (for a single unit, though sold in packs)
• Ojiji: Outdoor irrigation with cold water only

Akwụkwọ ikike na nkwado

For warranty information or technical support, please refer to the official Orbit websaịtị ma ọ bụ kpọtụrụ ngalaba ọrụ ndị ahịa ha. Debe akwụkwọ nnata ịzụrụ maka akwụkwọ ikike.

Ozi mkpọtụrụ: Biko gaa na Orbit Store on Amazon or the official Orbit websaịtị maka nkọwa nkwado kachasị ugbu a.