CYCPLUS 15.8'' Extended Tire Inflator Hose Adapter User Manual

Ngwaahịa gafereview

The CYCPLUS 15.8'' Extended Tire Inflator Hose Adapter is designed to extend the reach and improve the usability of compatible portable air pumps. This accessory facilitates easier tire inflation by providing additional length and a secure connection to the tire valve.

Image: The CYCPLUS 15.8'' Extended Tire Inflator Hose Adapter, featuring a black braided hose with brass connectors and a quick-clip valve attachment.

Ndakọrịta

This hose adapter is compatible with CYCPLUS portable air pumps models A2, A2 gbakwunyere, AL2, A14, na A8. Ọ bụ Ọ BỤGHỊ suitable for tiny E-pump models.

Ihe ngwugwu

• Air hose adapter (15.8 inches)
• Presta Valve nkwụnye

Melite

1. Connect to Inflator: Screw the threaded end of the 15.8-inch hose adapter onto the output port of your compatible CYCPLUS portable air pump (A2/A2 Plus/AL2/A14/A8). Ensure a tight seal to prevent air leakage.
2. Connect to Tire Valve:
   • For Schrader valves: Directly attach the quick-clip end of the hose adapter to the tire's Schrader valve stem. Push down the lever to lock it in place.
   • For Presta valves: If your tire has a Presta valve, first screw the included Presta valve adapter onto the tire's valve stem, then attach the quick-clip end of the hose adapter to the Presta valve adapter and lock the lever.

Ntuziaka ọrụ

1. Njikọ echekwara Ensure the hose adapter is securely connected to both the air pump and the tire valve.
2. Power On Inflator: Turn on your compatible CYCPLUS portable air pump.
3. Tọọ nrụgide achọrọ: Use the controls on your air pump to set the desired tire pressure (PSI).
4. Malite onu oriri: Activate the inflation function on your air pump. The hose adapter will channel air into the tire.
5. Njirimara nkwụsị akpaaka: Compatible CYCPLUS pumps typically feature an auto-stop function that will cease inflation once the preset pressure is reached.
6. Kwụpụ: Once inflation is complete and the pump has stopped, release the lever on the quick-clip end of the hose adapter and carefully disconnect it from the tire valve. If a Presta adapter was used, unscrew it from the valve stem.

Nlekọta

• Nhicha: Wipe the hose adapter with a clean, dry cloth after each use to remove dirt or debris.
• Nchekwa: Store the hose adapter in a cool, dry place away from direct sunlight and extreme temperatures.
• Nyocha: Periodically inspect the hose and connectors for any signs of wear, cracks, or damage. Replace if necessary.

Nchọpụta nsogbu

• Enweghị ikuku na-efe efe:
  • Check if the hose adapter is securely connected to both the pump and the tire valve.
  • Ensure the pump is powered on and functioning correctly.
  • Verify compatibility with your specific CYCPLUS pump model.
• Oke ọkụ: The inflator and hose adapter may become warm during prolonged use, especially when inflating tires to high pressures. Use the hose adapter to keep your hands away from the direct connection point to the pump.
• Okwu ndakọrịta This adapter is specifically designed for CYCPLUS A2/A2 Plus/AL2/A14/A8 models. It is not guaranteed to work with other brands or tiny E-pumps.

Nkọwapụta

Ozi akwụkwọ ikike

This product comes with a two-year warranty provided by CYCPLUS. Please refer to the manufacturer's warranty policy for specific terms and conditions.