Arwibon GT08 60V 5A Battery Charger User Manual

Ngwaahịa gafereview

The Arwibon GT08 60V 5A Battery Charger is designed for charging electric scooter batteries. This manual provides essential information for safe and effective use, including setup, operation, maintenance, and troubleshooting.

This image displays the Arwibon GT08 60V 5A Battery Charger. The charger unit is black and rectangular, with a power input cable and a charging output cable. The power input cable has a standard two-prong plug, and the charging output cable has a specialized connector for electric scooters. Text on the charger unit provides model information, input/output specifications, and important safety warnings.

Ozi nchekwa

Please read and understand all safety instructions before using the charger. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Eji ime ụlọ naanị: This charger is designed for indoor use. Do not expose it to dampness, rain, or any liquids.
• Ndakọrịta batrị: Only use this charger with compatible rechargeable batteries as specified by the electric scooter manufacturer. Do not attempt to charge non-rechargeable batteries, as this can lead to explosion or fire.
• Akwa Voltage Ịdọ aka na ntị: The charger contains high internal voltage. Do not open the charger casing under any circumstances. There are no user-serviceable parts inside.
• Ụdọ Ike mebiri emebi: If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard. Do not use the charger with a damaged cord.
• Connection Sequence: Always connect the charger to the battery first, then plug the charger into the power outlet. When disconnecting, unplug the charger from the power outlet first, then disconnect from the battery.
• Gbanyụọ: Ensure the power supply is switched off before connecting or disconnecting the charger.
• Igwe ikuku: Ensure adequate ventilation around the charger during operation. Do not cover the charger.
• Ụmụaka na anụ ụlọ: Debe chaja ka ụmụaka na anụ ụlọ ghara iru.

Melite

1. Ịkwapu: Carefully remove the charger from its packaging. Inspect the charger and cables for any signs of damage.
2. Nkwanye: Place the charger on a stable, flat, and non-flammable surface in a well-ventilated area. Ensure it is away from direct sunlight, heat sources, and flammable materials.
3. Isi mmalite ike: Ensure the power outlet matches the input voltage requirements of the charger (180 Volts).

Ntuziaka ọrụ

1. Jikọọ na batrị: With the charger unplugged from the wall outlet, connect the charging output cable of the GT08 charger to the charging port on your electric scooter's battery. Ensure a secure connection.
2. Jikọọ na Ike: Plug the charger's power cord into a suitable 180V AC wall outlet.
3. Ngosipụta chaja: The charger typically has an indicator light. A red light usually indicates charging in progress, while a green light indicates charging is complete or standby. Refer to your scooter's manual for specific charging light behavior.
4. Nleba anya: Ahapụkwala chajị batrị n'echeghị ya ruo ogologo oge.
5. Kwụpụ: Once charging is complete (indicated by the light turning green, if applicable), first unplug the charger from the wall outlet. Then, disconnect the charging cable from the scooter's battery.

Note: Charging times vary depending on the battery capacity and its current charge level.

Nlekọta

• Nhicha: Disconnect the charger from all power sources and the battery before cleaning. Use a soft, dry cloth to wipe the exterior of the charger. Do not use liquid cleaners or solvents.
• Nchekwa: Store the charger in a cool, dry place when not in use. Avoid extreme temperatures and humidity. Keep cables neatly coiled to prevent damage.
• Nyocha: Periodically inspect the charger, power cord, and charging cable for any signs of wear, cuts, or damage. If any damage is found, discontinue use and seek professional assistance.

Nchọpụta nsogbu

Nkọwapụta

• Ụdị: GT08
• Akara: Arwibon
• Ntinye Voltage: 180 volts
• Mpụta ugbu a: 5 Amperes
• Mmepụta Voltage: 60 volts
• Akụkụ ngwaahịa: 9 x 4.7 x 2.4 sentimita (22.86 x 11.94 x 6.1 cm)
• Ibu ihe: 1.12 pound (0.51 n'arọ)
• Agba: Nwa
• Ụbọchị mbụ dị: Febụwarị 6, 2025

Akwụkwọ ikike na nkwado

For warranty information or technical support, please refer to the documentation provided with your purchase or contact Arwibon customer service directly. Specific warranty terms and support channels may vary.

Please note: This manual does not constitute a warranty.