Okwu mmalite
Welcome to the AVENLI Inflatable Hot Tub Spa experience. This manual provides essential information for the safe and efficient operation, setup, and maintenance of your new hot tub. Please read this manual thoroughly before installation and use, and keep it for future reference.
Your AVENLI hot tub is designed for comfort and relaxation, featuring a stylish rattan design, a round shape, and the capacity to comfortably seat 4-6 people. It offers heating up to 1040F (400C) and 140 soothing water jets for a hydrotherapy experience. Equipped with a digital control panel, advanced heating and filtration systems, and safety features like overheating protection and a lockable cover, it provides an easy-to-use and secure spa solution. Its foldable design and included cover make it convenient to store and maintain.
Image: The AVENLI 4-6 Person Inflatable Hot Tub Spa, showcasing its round shape and rattan exterior, with the control unit attached.
Ozi nchekwa
Always prioritize safety when operating your hot tub. Failure to follow these instructions can result in serious injury or property damage.
- Do not exceed the maximum water temperature of 1040F (400C).
- Supervise children at all times when they are near or in the hot tub.
- Ensure the RCD/GFCI (4-6mA) circuit breaker is properly installed and tested before each use.
- Do not operate the hot tub if any part is damaged or malfunctioning.
- Avoid using electrical appliances near the hot tub.
- Always use the lockable cover when the hot tub is not in use to prevent accidental access and heat loss.
Image: Diagram illustrating the 5-layer protection system of the hot tub, including double insulation, over-heating protection, RCD/GFCI circuit breaker, control panel lock, and triple backflow-proof protection.
Akụkụ gụnyere
Before beginning assembly, ensure all components listed below are present and undamaged:
- Ebe Spa tub
- Pump Unit (with digital control panel)
- Lockable Top Cover
- Inflatable Spa Lid
- Katrij nzacha (2)
- Inflating Hose
- Mmezi Patch
- Pump Unit Connectors
- Base Protector
- Valve ikuku
- Okpu
- GFCI nkwụnye
Image: A visual representation of all the complete hardware and accessories included with the hot tub, such as the repair patch, pump unit connectors, filter cartridges, base protector, airflow valve, top cover, inflatable spa lid, spa liner, inflating hose, caps, pump unit, and GFCI plug.
Melite
Follow these steps for easy installation of your inflatable hot tub:
- Họrọ ebe: Select a flat, stable, and level surface capable of supporting the weight of the filled hot tub (approximately 264 gallons / 1000 liters of water plus occupants). Ensure it is near a suitable electrical outlet with GFCI protection.
- Wepu ma dobe: Carefully remove the hot tub and all components from the packaging. Spread the base protector on your chosen location.
- Inflate the Spa: Connect the inflating hose to the pump unit and the hot tub's inflation valve. Use the pump unit to inflate the hot tub until it is firm to the touch but not over-inflated. Do not use an air compressor.
- Connect the Pump Unit: Attach the pump unit to the hot tub's inlet and outlet connections securely.
- Jupụta na mmiri: Fill the hot tub with fresh water using a garden hose, ensuring the water level is between the minimum and maximum fill lines indicated inside the tub.
- Install Filter Cartridge: Insert the filter cartridge into its housing within the hot tub.
Image: A collage demonstrating the easy installation process, including connecting the inflation hose to the pump unit and hot tub, inflating the tub, and filling it with water.
Na-arụ ọrụ
Your AVENLI hot tub features a user-friendly digital control panel for easy operation.
Ogwe njikwa dijitalụ
The digital control panel allows you to adjust temperature, activate the massage jets, and manage filtration settings with ease.
Foto: A nso nso view of the digital control panel, showing buttons for power, temperature adjustment, filter, bubble jets, and a digital display for temperature.
- Bọtịnụ ike: Turns the hot tub system on or off.
- Ndozi okpomọkụ: Use the up/down arrows to set your desired water temperature (up to 1040F / 400C).
- Jet Button: Activates the 140 soothing water jets for a relaxing massage experience. Press again to turn off.
- Bọtịnụ nzacha: Controls the filtration system. It is recommended to run the filter regularly to maintain water quality.
- Bọtịnụ mkpọchi: Kpochie ogwe njikwa iji gbochie mgbanwe mberede.
- Bọtịnụ nkeji okpomọkụ: Toggles between Celsius (0C) and Fahrenheit (0F).
Air Jet Massage
The hot tub features 140 air jets that provide a relaxing bubble massage. Simply press the jet button on the control panel to activate this feature.
Image: A woman relaxing in the hot tub, demonstrating the air jet massage feature with bubbles visible in the water.
Nlekọta
Regular maintenance is crucial for the longevity and hygiene of your hot tub.
Sistemụ nzacha
The hot tub features a filtration system with 150 filter pleats capable of keeping dust, dirt, and other particles out. Regularly clean and replace the filter cartridges to ensure optimal water quality.
Image: Two white filter cartridges with blue tops, designed for the hot tub's filtration system.
- Ihe nzacha ihicha: Remove the filter cartridge and rinse it with a garden hose weekly.
- Dochie nzacha: Replace filter cartridges every 1-2 months, or more frequently depending on usage and water quality.
Ọgwụgwọ mmiri
Maintain proper water chemistry using recommended hot tub chemicals (not included) to prevent algae growth and ensure sanitary conditions. Test water regularly.
Draining and Storage
When not in use for extended periods or for relocation, drain the hot tub completely using the easy drain valve. Clean and dry the tub thoroughly before folding and storing it in a cool, dry place.
Image: A collage showing the easy drain valve and the hot tub's foldable design for convenient storage.
Lockable Cover
Always use the included lockable cover when the hot tub is not in use. This helps maintain water temperature, keeps debris out, and prevents unauthorized access, enhancing safety.
Image: The AVENLI hot tub with its brown rattan-patterned lockable cover securely fastened, demonstrating its protective function.
Nchọpụta nsogbu
Nkebi a na-eleba anya na nsogbu ndị ị na-enwekarị na tub ọkụ gị.
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Baịnụ ọkụ anaghị akpọ ọkụ | Low water level; Filter clogged; Heater malfunction; Temperature setting too low. | Check water level and refill; Clean or replace filter; Contact customer support; Increase temperature setting. |
| Jets not working | Air pump malfunction; Clogged jets; Control panel error. | Ensure pump is powered; Clean jet nozzles; Reset control panel or contact support. |
| Water quality issues (cloudy, green) | Improper chemical balance; Dirty filter; Infrequent water changes. | Test and adjust water chemistry; Clean/replace filter; Drain and refill hot tub. |
| Mmiri na-agbapụta | Loose connections; Puncture in liner. | Tighten all connections; Locate and repair puncture with provided patch kit. |
Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Ụdị | AVENLI |
| Aha Nlereanya | Avenli Spa Rattan Nice |
| Nọmba nlereanya | 17286USV31DQ |
| Ike | 4-6 Onye |
| Ike mmiri | 264 lita (1000 lita) |
| Akụkụ (L x W x H) | 80.3" x 80.3" x 27.6" (204cm x 204cm x 70cm) |
| Ibu Ibu | Pound 61.96 (28.1 n'arọ) |
| Oke. Igwe ọkụ ọkụ | 1040F (400C) |
| Ụgbọ mmiri mmiri | 140 |
| Ụdị | Gburugburu |
| Agba | Brown (Rattan) |
| Atụmatụ nchekwa | Overheating Protection, Lockable Cover, RCD/GFCI (4-6mA) Circuit Breaker |
Image: A diagram illustrating the dimensions of the hot tub, showing a diameter of 80.3 inches (204 cm) and a height of 27.6 inches (70 cm).
Ozi akwụkwọ ikike
AVENLI products are manufactured to high-quality standards. This product comes with a limited warranty against manufacturing defects. Please refer to the warranty card included in your packaging for specific terms, conditions, and duration of coverage. Keep your proof of purchase for warranty claims.
Nkwado ndị ahịa
For any questions, technical assistance, or warranty claims, please contact AVENLI customer support. Contact information can typically be found on the product packaging or on the official AVENLI website. Please have your model number (17286USV31DQ) and proof of purchase ready when contacting support.