1. Okwu mmalite
The xTool F1 Lite is a portable and high-speed laser engraving machine designed for precision and versatility. It features a 10W diode laser, enabling rapid engraving and cutting on a wide range of materials. Its compact design and user-friendly interface make it suitable for both beginners and experienced users.
The xTool F1 Lite Laser Engraver in operation, demonstrating its ability to engrave on cylindrical objects like tumblers.
An infographic detailing the xTool F1 Lite's key features, including its 4000mm/s speed, Ultra HD detail, portability, and support for over 300 materials.
2. Ntọala na ojiji mbụ
The xTool F1 Lite is designed for quick and easy setup. It comes pre-assembled, allowing you to begin creating almost immediately after unboxing. Follow these general steps for initial setup:
- Unboxing: Jiri nlezianya wepụ ihe niile dị na nkwakọ ngwaahịa.
- Nkwanye: Place the engraver on a stable, flat surface in a well-ventilated area.
- Njikọ ike: Connect the power adapter to the engraver and then to a power outlet.
- Nwụnye ngwanrọ: Download and install the XCS software on your computer or mobile device. The software is intuitive and widely used.
- Ndokwa ihe: Place your desired material on the engraving platform.
- Auto-Focus & Live Preview: Utilize the auto-focus feature and live preview in the XCS software to ensure precise positioning and optimal engraving results, minimizing material waste.
The simplified customization process: Design patterns on a mobile device, preview the position on the engraver, and achieve the final engraved result.
3. Ntuziaka ọrụ
The xTool F1 Lite offers lightning-fast engraving speeds of 4000mm/s, allowing for quick completion of projects. Its Ultra Galvo system ensures high precision, capturing intricate details with accuracy.
Supported Materials and Engraving Capabilities
The 10W diode laser of the F1 Lite is capable of engraving and cutting a wide variety of materials. Note that the F1 Lite features a 10W diode laser only and does not support direct engraving on all metals or rubber, unlike models with an infrared laser.
- Ihe osise: Wood, Leather, Acrylic, Glass, Rock (Slate), Paper, Cork, Stainless Steel, Coated Metals.
- Ịcha: Up to 8mm Basswood (multiple cuts), Up to 6mm dark opaque Acrylic (multiple cuts), Paper, Leather.
The xTool F1 Lite demonstrating its capability to engrave on over 300 different materials, including paper, wood, leather, and more.
A zuru ezu view of an engraved image, showcasing the high-definition resolution and precision achievable with the xTool F1 Lite.
Vidiyo ngwaahịa ngwaahịa
This video demonstrates how quickly the xTool F1 Lite can engrave a unique design onto a cup, highlighting its speed and efficiency for personalized items.
Watch this video to see the xTool F1 Lite in action, creating a special gift box with custom engravings, showcasing its precision for detailed projects.
4. Nlekọta
Regular maintenance ensures the longevity and optimal performance of your xTool F1 Lite. Always power off and unplug the device before performing any maintenance.
- Na-ehicha oghere: Periodically clean the laser lens with a soft, lint-free cloth and lens cleaning solution to maintain engraving quality.
- Cleaning the Engraving Platform: Remove debris and dust from the engraving platform after each use to prevent buildup that could affect material placement or engraving results.
- Sistemu ikuku: Ensure the built-in fan and ventilation openings are clear of obstructions to maintain proper airflow and smoke extraction.
- Nchacha izugbe: Jiri akọrọ ma ọ bụ ntakịrị hichapụ mpụta igwe ahụamp akwa . Zere iji kemịkalụ siri ike.
The xTool F1 Lite features a fully enclosed design for enhanced safety, including laser light-proof housing and a smoke-free built-in fan.
5. Nchọpụta nsogbu
If you encounter issues with your xTool F1 Lite, refer to the following common troubleshooting tips. For more complex problems, please contact customer support.
- Engraver Not Powering On: Check the power cable connection to both the engraver and the power outlet. Ensure the power switch is in the 'On' position.
- Nsogbu Njikọ Ngwanrọ: Verify that the engraver is properly connected to your computer or mobile device via USB or Bluetooth. Restart the XCS software and the engraver.
- Ọdịdị Ịkpụ Ihe Na-adịghị Mma: Ensure the material is correctly focused. Clean the laser lens. Adjust engraving parameters (power, speed, passes) in the XCS software according to the material type.
- Ọ naghị agba ọkụ site na laser: Check if the safety cover is properly closed. Ensure the emergency stop button is not pressed.
- Mkpọtụ na-adịghị ahụkebe: Power off the machine immediately and inspect for any obstructions or loose parts. Do not operate if unusual noises persist.
6. Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Ụdị | xTool |
| Nọmba nlereanya | MXF-K001-B10 |
| Ụdị Laser | 10W Diode Laser |
| Ọsọ ihe osise | 4000mm / s |
| Motion Precision | 0.00199mm |
| Tinyegharịa nkenke | 0.000248 |
| Ibu Ibu | 17.01 pound (ihe dị ka 7.7 n'arọ) |
| Akụkụ ngwugwu | 16 x 16 x 12.5 sentimita asatọ |
| Mba onye si | China |
| Onye nrụpụta | Makeblock Co.,Ltd |
| Ụbọchị mbụ dị | Febụwarị 9, 2025 |
7. Akwụkwọ ikike Ozi
The xTool F1 Lite Laser Engraver comes with a Akwụkwọ ikike nke afọ 1 from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the official xTool websaịtị ma ọ bụ kpọtụrụ nkwado ndị ahịa.
8. Nkwado ndị ahịa
For any questions, technical assistance, or support needs, xTool provides multi-channel service options:
- Nkwado email: Reach out via email for detailed inquiries.
- Mkparịta ụka dị ndụ: Access live chat support for immediate assistance.
- Nkwado ekwentị: Contact our technical service team by phone.
- Otu Facebook Join the official xTool Facebook group for community support, tips, and discussions.
Our technical service team is dedicated to providing prompt and helpful responses to ensure a smooth experience with your xTool F1 Lite.
