Ntuziaka nchekwa dị mkpa
Gụọ ntuziaka niile tupu i jiri ihe na-ekpo ọkụ a. Ọ bụrụ na i meghị ihe ndị a, ọ nwere ike ibute ọkụ, ọkụ eletrik, ma ọ bụ mmerụ ahụ.
- Ihe ize ndụ nke Ọkụ: Do not use this heater with an extension cord or power strip. Plug directly into a wall outlet.
- Nchekwa oke ọkụ: The heater is equipped with an overheat protection system that automatically shuts off the unit if it overheats. If this occurs, unplug the heater, allow it to cool for 15 minutes, then plug it back in and power it on.
- Nkwanye: Do not locate the heater against walls or behind drapes. Keep combustible materials at least 3 feet (0.9 meters) from the front of the heater and away from the sides and rear.
- Igwe ikuku: Never cover the heater. Obstruction of the air intakes on the back or the grill on the front can cause overheating.
- Mkpughe mmiri: Do not use in bathrooms, laundry areas, or similar indoor locations where it may come into contact with water.
- Nlekọta: Nleba anya dị mkpa mgbe ọkụ ọkụ ọ bụla na-eji ma ọ bụ nso ụmụaka ma ọ bụ ndị na-adịghị mma.
- eriri ike: Ejila eriri n'okpuru kapeeti. Ejila akwa akwa, ndị na-agba ọsọ, ma ọ bụ ihe mkpuchi yiri ya kpuchie eriri. Hazie eriri pụọ na mpaghara okporo ụzọ yana ebe ọ na-agaghị akwụsị.
- ETL kwadoro: This product is ETL certified, ensuring it meets recognized safety standards.
Ngwaahịa gafereview
The Aiwa WSH3-1003 is a compact, plug-in ceramic space heater designed for supplemental heating in small indoor spaces. It features an LCD digital screen, adjustable thermostat, and a 24-hour timer for personalized comfort and energy efficiency.
Foto: N'ihu view of the Aiwa Plug-In Heater, illustrating its key features such as the rotating plug, timer, LED display, overheat protection, and ETL certification.
Akụkụ ndị bụ isi:
- Obere ma dị ike: 400W ceramic heating element for quick warmth in small areas.
- Ngosipụta dijitalụ LCD: Easy-to-read screen for temperature and settings.
- Thermostat nwere ike imeghari: Set desired temperature up to 90°F (32°C).
- Oge elekere 24: Program heating schedules for convenience and energy saving.
- Nchekwa oke ọkụ: Automatic shut-off for enhanced safety.
- Rotating Plug: 90°/180° degree rotation for flexible placement in various outlets.
- ETL kwadoro: Meets safety standards.
Melite
- Ịkwapu: Jiri nlezianya wepụ ihe na-ekpo ọkụ ahụ na ngwugwu ya.
- Họrọ ebe: Choose a suitable 3-prong wall outlet. Ensure there are no obstructions around the heater and that it is at least 3 feet away from any combustible materials. The heater must always face upright.
- Adjust Plug Angle (if needed): The heater features a rotating plug for flexible placement. To adjust the plug, press the button located on the side of the plug assembly and rotate the plug to the desired 90° or 180° orientation.
Foto: N'azụ view of the heater demonstrating the rotating plug feature. The plug can be adjusted to fit various outlet orientations by pressing a button.
- Tinye: Insert the heater directly into a 3-prong wall outlet. Do not use extension cords or power strips.
Ntuziaka ọrụ
The heater's control panel is located on the top of the unit, featuring an LCD display and several buttons for operation.
Foto: Zuru ezu view of the heater's control panel, highlighting the temperature control, power, and timer buttons.
- Gbanyụọ/ Gbanyụọ:
- Locate the red power switch on the side of the heater.
- Flip the switch to the "ON" position to power on the unit. The LCD display will illuminate.
- Flip the switch to the "OFF" position to power off the unit.
- Na-agbanwe okpomọkụ:
- Press the "Temperature Control" buttons (up/down arrows) on the control panel to set your desired temperature. The temperature range is up to 90°F.
- Igwe ọkụ ahụ ga-agbanyụ ma ọ bụ gbanyụọ ya na akpaghị aka iji nọgide na-enwe okpomọkụ edobere.
- Isetịpụ oge:
- Press the "Timer" button on the control panel.
- Use the "Temperature Control" buttons (up/down arrows) to set the desired number of hours (1-24) for the heater to operate before automatically shutting off.
- The timer can also be used to program the heater to turn on after a set number of hours.
- Ọsọ onye ofufe:
- Press the "Fan Speed" button (fan icon) to cycle through different fan speed settings (if available).
Video: An "In Hand Review" demonstrating the physical features and basic operation of the Aiwa Plug-In Heater, including the rotating plug and control panel functions. This video is provided by "In Hand Reviews".
Nlekọta
Nlekọta oge niile na-eme ka arụmọrụ dị mma na ogologo ndụ nke ikpo ọkụ gị.
- Nhicha: Wepụ ihe na-ekpo ọkụ mgbe niile tupu ị sachaa ya. Jiri ihe na-ekpo ọkụ dị nro, damp akwa iji hichaa elu elu. Ejila ihe nchacha abrasive ma ọ bụ ihe mgbaze.
- Mwepụ uzuzu: Use a vacuum cleaner with a brush attachment to gently remove dust from the air intake and exhaust grilles.
- Nchekwa: Mgbe ị naghị eji ya, debe ihe na-ekpo ọkụ ahụ n'ebe dị jụụ ma kpọọ nkụ.
Nchọpụta nsogbu
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Igwe ọkụ anaghị agbanye. | No power, power switch off, or overheat protection activated. | Ensure heater is securely plugged into a working 3-prong outlet. Check the red power switch on the side. If the unit overheated, unplug it, wait 15 minutes, then plug it back in. |
| Igwe na-ekpo ọkụ anaghị emepụta okpomọkụ ma ọ bụ okpomọkụ na-ezughị ezu. | Temperature setting too low, or room size too large for the heater. | Increase the thermostat setting. This heater is designed for small spaces (400W). For larger rooms, multiple units or a higher wattage heater may be required. |
| Ihe na-ekpo ọkụ kwụsịrị ịrụ ọrụ na mberede. | Nchekwa oke ọkụ agbanyere. | Unplug the heater and allow it to cool for 15 minutes. Check for any obstructions blocking the air intake or exhaust. Plug back in and restart. |
Nkọwapụta
- Akara: Aịwa
- Nọmba nlereanya: WSH3-1003
- Mpụta ike: 400W
- Ihe kpo oku: Ceramic
- Thermostat nwere ike imeghari: Ruo 90°F
- Ngụ oge: 24-hour mmemme
- Plug Rotation: 90°/180°
- Atụmatụ nchekwa: Overheat Protection, ETL Certified
- Akụkụ ngwaahịa: 3.2"D x 4.2"W x 7.5"H
- Ibu ihe: 1.5 pound
- Isi mmalite ike: Igwe ọkụ eletrik
- Ojiji ime ụlọ/n'èzí: Naanị ime ụlọ
- Ụdị ụlọ: Bedroom, Home Office (small spaces)
Akwụkwọ ikike na nkwado
For warranty information or technical support, please contact Aiwa customer service. Refer to your purchase documentation for specific warranty terms and conditions.
- Ndị ọrụ nlekọta ndị ahịa: 833-902-2335
- Nkwado email: aiwasupport@xtremeconnected.com
