XTRARM TiTon Double Full Motion TV Wall Mount User Manual

1. Ozi nchekwa dị mkpa

Please read this entire manual before installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor for assistance.

• We accept no responsibility for incorrect or faulty installation.
• Follow the enclosed installation instructions carefully.
• Check the condition and completeness of all items before beginning.
• The fastening materials supplied for wall mounting are intended exclusively for fastening to solid masonry or concrete. For other wall types, such as hollow bricks, plasterboard, or lightweight construction, please contact a specialist retailer for information on suitable fastening elements.
• Under no circumstances should you exceed the limit values specified for the product.

2. Ihe ngwugwu

Verify that all components are present and undamaged before installation. If any parts are missing or damaged, do not attempt to install. Contact customer support for replacement parts.

Figure 2.1: XTRARM TiTon Double TV Wall Mount and included hardware components, including various screws, anchors, washers, and a drilling template.

Ngwungwu a na-agụnyekarị:

• XTRARM TiTon Double TV Wall Mount assembly
• Standard mounting hardware for TV and wall (various screws, anchors, washers)
• Ndebiri egwu egwu
• Small spirit level
• Multiple hook-and-loop straps for cable management

3. Nkọwapụta

Figure 3.1: VESA compatibility and maximum weight capacity.

Figure 3.2: Key dimensions and movement capabilities of the mount.

Figure 3.3: Comprehensive technical drawing with detailed dimensions and adjustment ranges.

4. Ntọala na nwụnye

Proper installation is crucial for the safety and stability of your TV. Ensure you have the necessary tools and assistance before proceeding.

4.1 Ngwa achọrọ (anaghị etinye ya)

• Kwuo egwu
• Stud finder (if mounting to wood studs)
• Pensụl
• Ihe teepu
• Swịga socket ma ọ bụ wịga a na-agbanwe agbanwe
• Phillips isi sikruuokwomoto

4.2 Ịhọrọ ebe mgbago

Select a wall location that can safely support the weight of the mount and your TV. For solid concrete or masonry walls, use the provided anchors. For wood stud walls, ensure the mount is centered on a stud. Avoid mounting to drywall alone.

4.3 Attaching the Wall Plate

1. Position the drilling template at the desired height on the wall and mark the drill holes with a pencil. Use the included spirit level to ensure it is perfectly horizontal.
2. Drill pilot holes at the marked locations. The drill bit size will depend on your wall type and the chosen anchors/screws.
3. Insert wall anchors (if required for your wall type) into the pilot holes.
4. Align the wall plate with the drilled holes and secure it to the wall using the appropriate screws and washers. Ensure it is firmly attached.

4.4 Ịtinye ihe nkwado TV na TV

1. Carefully place your TV face down on a soft, clean surface to prevent screen damage.
2. Chọpụta oghere VESA na-agbago n'azụ TV gị.
3. Select the correct size screws and spacers (if needed) from the provided hardware that fit your TV's VESA pattern.
4. Attach the two vertical TV brackets to the back of your TV, ensuring they are level and securely fastened. Do not overtighten.

4.5 Ịwụnye TV na efere mgbidi

1. With assistance, carefully lift the TV and hook the attached TV brackets onto the wall plate.
2. Hụ na TV ahụ dị n'elu mgbidi ahụ nke ọma.
3. Engage any safety locking mechanisms on the brackets to prevent accidental dislodgement.

Ọgụgụ 4.1: Ọpụample of the XTRARM TiTon Double TV Wall Mount installed with a television.

5. Ntuziaka ọrụ

The XTRARM TiTon Double mount offers full motion capabilities for optimal viewakụkụ .

5.1 Adjusting Wall Distance

Gently pull or push the TV to extend or retract the mount. The mount allows for a wall distance ranging from 12.9 cm to 120 cm.

Figure 5.1: Adjustable wall distance of the mount.

5.2 Ndozigharị Swivel

The mount can swivel up to 180 degrees (90 degrees left or right) to direct the screen towards different viewmpaghara .

Figure 5.2: Swivel capability of the mount.

5.3 Tilt mmezi

Adjust the vertical tilt of your TV from -5 degrees to +12 degrees to reduce glare and optimize viewing comfort. Loosen the tilt adjustment knobs, set the desired angle, and then retighten the knobs.

Figure 5.3: Tilt adjustment range and mechanism.

5.4 Rotation Adjustment

The mount allows for a 90-degree rotation, enabling you to switch between landscape and portrait orientation for your TV.

Figure 5.4: 90-degree rotation capability.

5.5 Njikwa eriri

Use the provided hook-and-loop straps to bundle and organize cables along the mount arms for a tidy appearance and to prevent snagging during adjustments.

6. Nlekọta

Regular maintenance ensures the longevity and safe operation of your TV wall mount.

• Nhicha: Wipe the mount with a soft, dry cloth. Avoid abrasive cleaners or solvents that could damage the finish.
• Lelee njikọ: Na-elele skru na boltị niile mgbe niile iji hụ na ha siri ike. Mee ka ọ sie ike ma ọ dị mkpa, mana emela ka ọ sie ike karịa.
• Nyochaa maka eyi: Regularly inspect the mount for any signs of wear, damage, or corrosion. If any issues are found, discontinue use and contact customer support.

7. Nchọpụta nsogbu

If you encounter any issues with your XTRARM TiTon Double TV Wall Mount, refer to the following common problems and solutions:

8. Akwụkwọ ikike na nkwado

For information regarding warranty coverage, technical support, or replacement parts, please refer to the documentation provided at the time of purchase or visit the official XTRARM websaịtị. Debe nnata nzụta gị ka ihe akaebe nke ịzụrụ.