1. Ngwaahịa gafereview
The Hormann FIT 2-1 BS Push Button is a 2-button wireless transmitter designed for controlling automated systems. It operates at a frequency of 868.35 MHz and utilizes BiSecur technology for secure communication. This device allows for the control of two different motorizations or two distinct functions on the same automated system. It is intended exclusively for indoor use in a dry environment.
The push button is easy to install and is powered by two 1.5V LR03/AAA batteries, which are included. The package also contains an installation manual and mounting accessories to facilitate setup.
Foto 1: N'ihu view of the Hormann FIT 2-1 BS Wireless Push Button, showing the two control buttons.
2. Nka na ụzụ nkọwa
| Ụdị | Hormann |
| Ntuziaka Model | 4511695 |
| Akụkụ (L x W x H) | 80 x 80 x 36 mm |
| Ugboro ugboro | 868.35 MHz |
| Ọnụọgụ bọtịnụ | 2 |
| Ọnụọgụ nke ọwa | 2 |
| Ịnye ọkụ | 2 x 1.5V LR03/AAA batteries (included) |
| Ibu | 0.2 kg (90 grams according to specifications) |
| Ntụle gburugburu | IP 20 (Indoor use only) |
3. Ndakọrịta
The Hormann FIT 2-1 BS is compatible with Hormann motorizations that utilize BiSecur technology. It is also retro-compatible with older 868 MHz fixed code motorizations.
Compatible motorizations include:
- SupraMatic
- ProMatic
- RotaMatic
- LineaMatic
- VersaMatic
It can also be used with key switches such as:
- ESA 40
- ESU 40
- STAP 40
- STUP 40
- STAP 50
- STUP 50
Important: Verify compatibility with your existing motorizations before installation.
4. Ntọala na nwụnye
The Hormann FIT 2-1 BS push button is designed for easy installation. It comes with all necessary mounting accessories.
4.1. Mwepu na nyocha izizi
- Carefully unpack the push button and all accessories.
- Ensure all components listed in the packaging are present.
- Lelee ngwaọrụ maka mmebi ọ bụla a na-ahụ anya.
4.2. Ntinye batrị
The device is powered by two 1.5V LR03/AAA batteries. These are typically pre-installed or included separately.
- Locate the battery compartment, usually on the back or side of the unit.
- Mepee mkpuchi ụlọ.
- Insert the two LR03/AAA batteries, ensuring correct polarity (+/-).
- Mechie mkpuchi nke batrị batrị nke ọma.
Foto 2: Akụkụ view of the push button, indicating the location of the battery compartment.
4.3. Na-agbanye bọtịnụ Push
The push button must be installed in a dry, indoor environment.
- Choose a suitable indoor location for mounting, ensuring it is dry and easily accessible.
- Use the provided mounting accessories (screws, wall plugs) to securely attach the push button to the wall.
- Ensure the device is firmly fixed and does not wobble.
4.4. Programming the Buttons
The programming procedure links the push button to your Hormann motorization(s).
- Refer to the detailed programming instructions provided in the included manual.
- Typically, this involves activating a programming mode on your motorization unit and then pressing the desired button on the FIT 2-1 BS push button.
- Repeat the process for the second button if you wish to control another motorization or function.
- Test the functionality after programming to ensure successful pairing.
5. Ntuziaka ọrụ
Once programmed, operating the Hormann FIT 2-1 BS is straightforward.
- Pịa upper button to activate the first programmed function or motorization (e.g., open/close garage door).
- Pịa lower button to activate the second programmed function or motorization (e.g., partial opening, light control).
- The device transmits a secure BiSecur signal to your receiver.
Ọgụgụ 3: N'akuku view of the push button, highlighting the two distinct control surfaces.
6. Nlekọta
The Hormann FIT 2-1 BS requires minimal maintenance to ensure reliable operation.
6.1. Nhicha
- Wipe the surface of the push button with a soft, dry cloth.
- Ejila ihe nhicha, ihe mgbaze, ma ọ bụ kemịkalụ siri ike, n'ihi na ha nwere ike imebi casing.
6.2. Ngbanwe batrị
When the batteries are low, the device's indicator light (if present) may flash or its range may decrease. Replace batteries as follows:
- Mepee ebe batrị dịka akọwara na Nkebi nke 4.2.
- Remove the old 1.5V LR03/AAA batteries.
- Insert new 1.5V LR03/AAA batteries, observing correct polarity.
- Tụfuo batrị ochie dịka iwu mpaghara siri dị.
7. Nchọpụta nsogbu
If the push button is not functioning as expected, consider the following:
- No response from motorization:
- Lelee ma etinyere batrị ndị ahụ nke ọma na agwụchabeghị ya. Dochie ma ọ dị mkpa.
- Ensure the push button is within the operating range of the motorization's receiver.
- Verify that the push button is correctly programmed to the motorization. Refer to the programming instructions.
- Check for any obstructions between the push button and the receiver that might block the signal.
- Ọrụ na-adịte aka:
- Nke a nwere ike igosi na ike batrị dị ala. Dochie batrị ndị ahụ.
- Ensure there is no significant radio interference in the area.
- Push button not mounting securely:
- Ensure you are using appropriate screws and wall plugs for your wall type.
- Avoid over-tightening screws, which can damage the casing.
If problems persist after following these steps, consult the full product manual or contact Hormann customer support.
8. Ozi nchekwa na ịdọ aka ná ntị
- The push button must be installed exclusively in a dry, indoor environment. Do not expose it to moisture, rain, or extreme temperatures.
- Emeghela ngwaọrụ casing beyond the battery compartment, except for authorized service personnel.
- Debe batrị ebe ụmụaka na-apụghị iru. Ọ bụrụ na iloro, chọọ nlekọta ahụike ozugbo.
- Ensure proper disposal of used batteries according to local environmental regulations.
- Ngwaọrụ a abụghị ihe egwuregwu ụmụaka. Na-anọ n'ebe ụmụaka nọ.
- Always ensure the area around the motorization is clear before operating to prevent injury or damage.
Foto 4: Akụkụ view of the push button, illustrating its compact design and potential security indicators.
9. Akwụkwọ ikike Ozi
Specific warranty details for the Hormann FIT 2-1 BS Wireless Push Button are not provided in the product description. Please refer to the warranty card included with your purchase or contact your retailer for information regarding warranty terms and conditions.
10. Nkwado na kọntaktị
Contact information for direct customer support is not provided in the product description. For technical assistance, troubleshooting, or further inquiries, please refer to the official Hormann websaịtị ma ọ bụ kpọtụrụ onye na-ere ahịa nke ị zụtara ngwaahịa a.
