Amazon Basics Portable Ceramic Electric Heater

1. Ozi nchekwa dị mkpa

Please read this entire manual carefully before using the heater. Failure to follow these instructions could result in fire, electric shock, injury, or property damage. Keep this manual for future reference.

• Nkwanye: Always place the heater on a firm, level surface. Do not place on soft surfaces like beds or rugs where openings may be blocked.
• mkpochapụ: Maintain a minimum distance of 1 meter (3 feet) from walls, furniture, curtains, and other combustible materials.
• Ịnye ọkụ: Ensure the heater is connected to a grounded outlet of the correct voltage (220-240V, 50Hz). Do not overload electrical circuits.
• Ụdọ ndọtị: Avoid using extension cords. If one is necessary, ensure it is heavy-duty and rated for the heater's wattage.
• Mmiri: Ejila ikpo ọkụ na mmiri ma ọ bụ damp locations, such as bathrooms or laundry areas. Keep away from water sources.
• Nlekọta: Do not leave the heater unattended while in use. Always unplug the heater when not in use.
• Ụmụaka na anụ ụlọ: Keep children and pets away from the heater. The surface can become hot during operation.
• Nchekwa oke ọkụ: This heater is equipped with an automatic overheat protection system. If the heater overheats, it will shut off automatically. Unplug the heater, allow it to cool for 30 minutes, then plug it back in.
• Ngbanwe Ndụmọdụ: The heater includes a safety tip-over switch that automatically turns off the unit if it is accidentally knocked over.
• Nlekọta: Do not attempt to repair or modify the heater yourself. Refer all servicing to qualified personnel.

2. Ihe ngwugwu

Jiri nlezianya tọpụ igbe ahụ ma hụ na ihe niile dị ma dịkwa mma.

• Amazon Basics Portable Ceramic Electric Heater
• Remote Control (with 1 x 12V battery included)
• Akwụkwọ ntuziaka onye ọrụ

3. Ngwaahịa gafereview

Familiarize yourself with the components and controls of your heater.

Foto 1: N'ihu view of the Amazon Basics Portable Ceramic Electric Heater.

Ogwe njikwa na ngosi

Figure 2: Digital control panel and display showing current temperature.

• Bọtịnụ ike: Turns the heater on or off.
• Bọtịnụ ụkpụrụ: Cycles through heating modes (High, Medium, Low, ECO, Fan Only).
• Bọtịnụ elu/ala okpomọkụ: Adjusts the desired temperature (5-35°C).
• Bọtịnụ oscillation: Activates or deactivates the 70° oscillation function.
• Bọtịnụ ngụ oge: Sets the 24-hour programmable timer.
• Ngosipụta Digital: Shows current temperature, selected mode, and timer settings.

Njikwa anya

The remote control provides convenient access to all heater functions. Ensure the 12V battery is correctly installed.

Figure 3: The heater shown with its included remote control.

4. Nhazi

1. Ịkwapu: Remove the heater and all packaging materials from the box.
2. Nkwanye: Place the heater on a stable, flat, and heat-resistant surface. Ensure it is at least 1 meter (3 feet) away from any walls, furniture, or other objects.
3. Njikọ ike: Plug the power cord into a standard 220-240V, 50Hz grounded electrical outlet. Ensure the outlet is not overloaded by other appliances.
4. Batrị njikwa anya: If not already installed, open the battery compartment on the remote control and insert the 12V battery, observing correct polarity.

5. Ntuziaka ọrụ

Gbanyụọ/ Gbanyụọ

• Pịa bọtịnụ ike on the control panel or remote control to turn the heater on. The digital display will illuminate.
• Pịa bọtịnụ ike again to turn the heater off.

Selecting Heating Mode

With the heater on, press the bọtịnụ ọnọdụ repeatedly to cycle through the available modes:

• Okpomọkụ dị elu: Provides maximum heating output (1800W).
• Okpomọkụ dị n'etiti: Provides moderate heating output.
• Okpomọkụ dị obere: Provides minimal heating output.
• Ọnọdụ ECO: The heater automatically adjusts its power output to maintain the set temperature, optimizing energy consumption.
• Naanị onye ofufe: Operates as a fan without heat.

Ntọala okpomọkụ

In any heating mode (High, Medium, Low, ECO), you can set your desired temperature:

• Jiri ihe Temperature Up (+) or Ala (-) buttons on the control panel or remote control.
• The temperature can be set between 5°C and 35°C, with precise 1°C adjustments.
• Igwe ọkụ ahụ ga-agbanyụ ma ọ bụ gbanyụọ ya na akpaghị aka iji nọgide na-enwe okpomọkụ edobere.

Ọrụ Oscillation

To distribute heat evenly across a wider area:

• Pịa bọtịnụ oscillation on the control panel or remote control. The heater will begin to rotate 70° from side to side.
• Pịa bọtịnụ oscillation again to stop the oscillation.

Ịtọ ngụ oge

The 24-hour programmable timer allows you to set a duration for the heater to operate before automatically turning off.

1. With the heater on, press the bọtịnụ ngụ oge. The display will show "00".
2. Jiri ihe Temperature Up (+) or Ala (-) buttons to set the desired number of hours (1-24).
3. Once the desired time is set, the timer will activate after a few seconds. The display will show the remaining time before switching back to the temperature display.
4. Ka ịkagbu oge, pịa bọtịnụ ngụ oge until "00" is displayed, or turn off the heater.

6. Nlekọta

Regular cleaning and proper storage will help ensure the longevity and efficient operation of your heater.

Nhicha

1. Always unplug the heater ma kwe ka ọ dị jụụ kpamkpam tupu ihicha ya.
2. Jiri nwayọ hichaa elu mpụta, damp akwa . Ejila ihe nchacha abrasive ma ọ bụ ihe mgbaze.
3. Use a vacuum cleaner with a brush attachment to gently remove dust from the air intake and exhaust grilles.
4. Ensure no water or liquids enter the interior of the heater.

Nchekwa

• Unplug the heater and allow it to cool completely.
• Clean the heater as described above.
• Store the heater in its original packaging or a suitable container in a cool, dry place.
• Do not place heavy objects on top of the heater during storage.

7. Nchọpụta nsogbu

Ọ bụrụ na ị na-enwe nsogbu na ihe na-ekpo ọkụ gị, lee nsogbu na ngwọta ndị a na-ahụkarị.

Ọ bụrụ na nsogbu ahụ anọgide mgbe ị nwalechara ngwọta ndị a, kpọtụrụ ndị ọrụ nkwado ndị ahịa.

8. Nkọwapụta

Technical details for the Amazon Basics Portable Ceramic Electric Heater.

Figure 4: Dimensions of the heater: 17cm (L) x 15.5cm (W) x 25.4cm (H).

• Nọmba nlereanya: DQ2508R-EU
• Akara: Amazon Basics
• Ụdị: Portable Ceramic Electric Heater
• Mpụta ike: 1800W
• Voltage: 220-240V
• Ugboro: 50Hz
• Akụkụ (L x W x H): 17 cm x 15.5 cm x 25.4 cm
• Arọ: Ihe dị ka 1.7 n'arọ
• Mgbanwe: 70°
• Oke okpomọkụ: 5°C - 35°C
• Atụmatụ pụrụ iche: Overheat Protection, Tip-Over Switch, Digital Display, Remote Control, 24-Hour Timer, ECO Mode
• Agba: Agba ntụ
• Ime ụlọ/n'èzí: Eji ime ụlọ naanị

9. Akwụkwọ ikike na nkwado

For warranty information or customer support, please refer to the documentation provided at the time of purchase or visit the official Amazon Basics website. Do not attempt to open or repair the product yourself, as this may void the warranty and pose safety risks.