8BitDo Ultimate Mini Wired Controller for Xbox - Instruction Manual

Okwu mmalite

This manual provides detailed instructions for the 8BitDo Ultimate Mini Wired Controller for Xbox. It covers essential information regarding setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device. This controller is officially licensed for Xbox and compatible with Xbox Series X|S, Xbox One, and Windows 10/11.

Melite

The 8BitDo Ultimate Mini Wired Controller is designed for simple plug-and-play functionality. Follow these steps to connect your controller:

1. Ensure your Xbox console (Xbox Series X|S, Xbox One) or Windows PC (Windows 10/11) is powered on.
2. Locate an available USB port on your console or PC.
3. Connect the USB-C end of the provided cable to the controller and the USB-A end to your console or PC.
4. The controller will automatically be detected and configured. The Xbox button on the controller will illuminate to indicate a successful connection.
5. For audio, connect a standard CTIA connector 3.5mm headset to the audio jack located on the controller.

The controller is now ready for use. No additional drivers are typically required for supported systems.

Na-arụ ọrụ njikwa

The 8BitDo Ultimate Mini Wired Controller features a standard layout with several advanced functionalities:

• Joysticks mmetụta Hall: These joysticks provide enhanced precision and durability, reducing drift over time.
• Ihe na-akpata mkpali: Experience tactile feedback with vibration in the triggers, adding immersion to your gameplay.
• Bumpers na D-pad a nụchara anụcha: Designed for a responsive and tactile feel, ensuring accurate inputs.
• Crystal Action Buttons: Durable and clear action buttons for a consistent feel.

RGB Lighting Fire Ring

The controller features interactive RGB lighting around the joysticks, known as the 'Fire Ring'. This lighting can be adjusted through multiple modes:

• Fire Ring Mode: Displays a dynamic lighting effect.
• Light-tracing Mode: Follows your joystick movements with light.
• Rainbow Ring Mode: Cycles through a spectrum of colors.

To cycle through the lighting modes or turn off the lighting, locate the small button positioned below the right analog stick. Press this button to change modes or deactivate the lighting as desired.

Nlekọta

Proper maintenance ensures the longevity and performance of your 8BitDo Ultimate Mini Wired Controller:

• Nhicha: Jiri akwa dị nro dị nro hichaa elu nke njikwa. Maka unyi isi ike, ntakịrị dampen the cloth with water. Avoid using harsh chemicals or abrasive cleaners, as these can damage the controller's finish and internal components.
• Nchekwa: Chekwaa onye njikwa ahụ n'ebe dị jụụ, kpọrọ nkụ na-adịghị na ìhè anyanwụ kpọmkwem na oke okpomọkụ. Zere idobe ihe dị arọ n'elu njikwa.
• Nlekọta USB: Handle the USB-C cable gently. Avoid sharp bends, kinks, or pulling the cable forcefully from the port. If the cable becomes damaged, replace it with a compatible USB-C cable to ensure proper functionality and safety.

Nchọpụta nsogbu

If you encounter issues with your controller, refer to the following common solutions:

• Onye njikwa anaghị aza:
  • Hụ na eriri USB ahụ jikọtara nke ọma na njikwa ahụ na njikwa ahụ/kọmputa ahụ.
  • Try connecting the controller to a different USB port.
  • Test the controller on another compatible device (if available) to determine if the issue is with the controller or the original device.
  • Malitegharịa ekwentị gị ma ọ bụ kọmputa gị.
• Lighting Issues (Too Bright/Not Working):
  • Press the small button located below the right analog stick to cycle through lighting modes or turn the lighting off/on. Repeated presses will change the effect or brightness.
• Audio Jack Not Working:
  • Ensure your headset uses a standard CTIA connector.
  • Verify the headset is fully plugged into the 3.5mm audio jack on the controller.
  • Test the headset with another device to confirm it is functioning correctly.
• Nkwụsị ma ọ bụ Nkwụsị Ntinye:
  • Ensure the USB cable is not damaged. Replace if necessary.
  • Avoid using USB hubs if possible; connect directly to the console/PC.

If these steps do not resolve the issue, please refer to the Support section for further assistance.

Nkọwapụta

Akwụkwọ ikike na nkwado

Ozi akwụkwọ ikike: This product comes with a manufacturer's warranty. Please refer to the warranty card included in the product packaging or visit the official 8BitDo websaịtị maka nkọwa na usoro akwụkwọ ikike.

Nkwado ndị ahịa: For technical assistance, product inquiries, or warranty claims, please visit the official 8BitDo support page or contact their customer service through the contact information provided on their website. Ensure you have your product model number (6922621507000) and proof of purchase available when contacting support.