1. Ozi nchekwa dị mkpa
Biko gụọ ntuziaka niile nke ọma tupu mgbakọ na iji. Debe akwụkwọ ntuziaka a maka ntụnye aka n'ọdịnihu.
- Always ensure the desk is properly anchored to the floor to prevent tipping.
- Agafela oke oke oke nke 270 lbs (122.5 n'arọ) on the desk frame.
- Debe ụmụaka na anụ ụlọ pụọ na tebụl mgbe ị na-arụ ọrụ.
- Hụ na ihe mgbochi ọ bụla adịghị n'ụzọ nke mmegharị tebụl ahụ (elu ma ọ bụ ala).
- Do not disassemble or modify the product. Contact customer support for any issues.
- Kwupu ike tupu ihicha ma ọ bụ mmezi.
2. Ngwaahịa gafereview
The Okin Dual Motor Electric Standing Desk Frame provides a robust and adjustable base for your workspace, allowing seamless transitions between sitting and standing positions.
Foto 2.1: Main components of the Okin Dual Motor Electric Standing Desk Frame, including the silver frame and the black memory controller.
Akụkụ ndị bụ isi:
- Sistemụ moto abụọ: Ensures smooth, quiet, and stable height adjustments.
- Ogologo Ogologo enwere ike idozi: From 23.7 inches (60 cm) to 49.3 inches (125 cm).
- Ike ibu: Supports up to 270 lbs (122.5 kg).
- Memory Controller: Features an intuitive control panel with 3 programmable height presets.
- Adjustable Frame Width: Crossbars extend from 43.3 inches (110 cm) to 70.9 inches (180 cm) to accommodate various desktop sizes.
- Off-Center C-Leg Design: Allows for additional storage options like drawers underneath the tabletop.
- Ọrụ dị jụụ: Na-arụ ọrụ na ọkwa mkpọtụ dị ala nke 48 dB.
Foto 2.2: Diagram illustrating the adjustable dimensions of the desk frame, including height range (23.7" to 49.3") and width range (43.3" to 70.9").
Foto 2.3: Agara nso view nke 3-stage sturdy frame, highlighting its robust construction for strong support and durability.
Foto 2.4: Illustration showing the dual high-performance motors and the desk's capacity to steadily lift up to 270 lbs.
3. Ntọala na Mgbakọ
The Okin Electric Standing Desk Frame is designed for easy assembly. All necessary tools and parts are included. It is recommended to assemble the desk with two people.
3.1. Tupu ịmalite:
- Unpack all components and verify against the parts list in the included installation manual.
- Kpochapụ ebe sara mbara maka mgbakọ.
- Ensure you have a suitable desktop (not included) with recommended dimensions: 47.2"–78.8" in length and 23.6"–39.4" in depth, and a minimum thickness of 0.6 inches.
Foto 3.1: Visual guide for selecting a suitable desktop, showing recommended dimensions and minimum thickness.
3.2. Nzọụkwụ Mgbakọ (Nduzi Izugbe):
- Attach the lifting columns to the foot supports.
- Connect the crossbar sections between the lifting columns, adjusting the width to match your desktop.
- Secure the side brackets to the lifting columns.
- Mount the control box and motors to the frame according to the detailed instructions in the manual.
- Connect all cables (motor cables, power cable, control panel cable) to the control box. Ensure connections are secure.
- Carefully place your desktop onto the assembled frame and secure it using the provided screws.
- Attach the control panel to your preferred side of the desktop (left or right).
- Tinye eriri ọkụ n'ime oghere eletrik gbadoro ụkwụ.
Refer to the comprehensive installation manual included in your package for detailed, step-by-step instructions and diagrams specific to your model.
4. Ntuziaka ọrụ
The Okin Electric Standing Desk Frame features an intuitive control panel for easy height adjustment and memory functions.
Foto 4.1: The multi-function intelligent keypad, showing the memory presets (1, 2, 3), up/down arrows, and LED display.
4.1. Basic Ọrụ:
- Gbazi Elu: Jiri ihe v (N'elu) na ▼ (Down) arrow buttons to raise or lower the desk to your desired height. The current height will be displayed on the LED screen.
- Changing Display Unit: Press the "CM/IN" button (if available on your model) to switch between centimeters and inches.
4.2. Memory Presets:
The control panel allows you to save up to 3 preferred height settings for quick adjustments.
- Ịchekwa ihe atọrọ:
- Jiri akụ elu/ala gbanwee tebụl ahụ ka ọ dị n'ogo ịchọrọ.
- Press the "M" button. The LED display will show "S-".
- Within 3 seconds, press the desired preset number button (1, 2, or 3). The display will show the number, confirming the height is saved.
- Icheta Preset: Simply press the corresponding preset number button (1, 2, or 3). The desk will automatically move to the saved height.
4.3. Initializing the System (Reset):
If the desk encounters an error or does not move smoothly, a system reset may be required.
- Pịa ma jide ▼ (Down) button until the desk reaches its lowest position and then slightly retracts. Release the button.
- If the issue persists, unplug the power cord for 10-15 minutes, then plug it back in and repeat the reset procedure.
5. Nlekọta
Regular maintenance ensures the longevity and optimal performance of your Okin Electric Standing Desk Frame.
- Nhicha: Wipe the desk frame with a dry cloth. Avoid using abrasive cleaners or harsh chemicals that could damage the finish.
- Njikwa USB: Periodically check all cables to ensure they are securely connected and not pinched or tangled. Proper cable management helps prevent damage and ensures smooth operation.
- Ihe nkwụnye: Mgbe ụfọdụ, lelee skru na boltị niile iji hụ na ha siri ike. Mee ka ọ sie ike ma ọ dị mkpa.
- Nkesa arọ: Distribute weight evenly on the desktop to prevent strain on the motors and frame.
6. Nchọpụta nsogbu
If you encounter issues with your desk frame, refer to the following common problems and solutions. If the problem persists, contact customer support.
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Desktọpụ anaghị emegharị. | Power cable disconnected; control box not connected; overload; system error. | Check power connection. Ensure all cables are securely plugged into the control box. Reduce weight on the desk. Perform a system reset (see Section 4.3). |
| Tebụl na-agagharị n'ụzọ na-adịghị mma ma ọ bụ na-eme mkpọtụ pụrụ iche. | Uneven weight distribution; loose connections; obstruction. | Redistribute weight evenly. Check all fasteners and connections. Ensure no objects are obstructing the lifting columns. |
| LED display shows an error code. | System error; motor fault. | Perform a system reset (see Section 4.3). If the error persists, contact customer support with the error code. |
| Ntọala ebe nchekwa anaghị arụ ọrụ. | Presets not saved correctly; system error. | Re-save the memory presets (see Section 4.2). Perform a system reset. |
7. Nkọwapụta ngwaahịa
| Njirimara | Nkọwa |
|---|---|
| Ụdị | Okin |
| Nọmba nlereanya | DS2.451.3S.01.WU.110 |
| Akụkụ ngwaahịa (D x W x H) | 42.52" x 14.17" x 8.66" (packaged) |
| Agba | Ọlaọcha |
| Isi ihe | Alloy Steel |
| Ogologo kacha nta | 23.7 sentimita (60 cm) |
| Ogologo kachasị elu | 49.3 sentimita (125 cm) |
| Adjustable Crossbar Length | 43.3" (110 cm) to 70.9" (180 cm) |
| Ike ibu | 270 lbs (122.5 n'arọ) |
| Ụdị moto | Ụgbọ ala abụọ |
| Ọkwa mkpọtụ | 48 dB |
| Mgbakọ chọrọ | Ee (Ngwaọrụ dị na ya) |
| Nhazi oche | Standing Desk (Off-Center C Feet) |
8. Akwụkwọ ikike Ozi
This Okin Electric Standing Desk Frame comes with a Akwụkwọ ikike nwere okeBiko lee kaadị akwụkwọ ikike dị na ngwugwu ngwaahịa gị maka usoro, ọnọdụ, na oge mkpuchi ahụ.
The warranty typically covers manufacturing defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or exceeding the weight capacity.
9. Nkwado ndị ahịa
For any questions, concerns, or assistance with your Okin Dual Motor Electric Standing Desk Frame, please contact our dedicated support team.
- Onye nrụpụta: Okin
- Onye na-ere ahịa: Okin America
- For prompt assistance, please have your model number (DS2.451.3S.01.WU.110) and purchase details ready.
- You can often find support contact information on the seller's page or within your product packaging.
