Okwu mmalite
This manual provides comprehensive instructions for the installation, operation, and maintenance of your ASD 2x2 LED Flat Panel Light with Motion Sensor. Please read this manual thoroughly before installation and retain it for future reference. This product is designed for indoor use only in commercial or industrial settings such as offices, schools, hospitals, retail spaces, and residential areas.
Ozi nchekwa
- Ịdọ aka ná ntị: Ihe ize ndụ nke ujo eletrik. Kwupu ike na fiusi ma ọ bụ sekit breaker tupu echichi ma ọ bụ ọrụ.
- Ekwesịrị ịrụ ọrụ ọkụ eletrik ruru eru.
- Gbaa mbọ hụ na ọkọnọ voltage is compatible with the luminaire (120-277V).
- Do not handle live wires.
- Ngwaahịa a dabara maka damp ebe.
- Agbanwela ihe nrụnye.
Njirimara ngwaahịa
- Nhazi ọgbara ọhụrụ: LED back-lit flat panel with anti-glare PC lens and durable commercial-grade aluminum housing.
- Microwave Motion Sensor: Built-in sensor automatically turns off the fixture when no motion is detected. Settings are adjustable via remote control (sold separately, ASIN B0D2KRKZHN).
- Color and Power Selectable: Choose between 3500K Neutral White, 4000K Cool White, or 5000K Daylight color temperatures and adjust power (20W/25W/30W) with a simple switch.
- Dimmable Driver: 0-10V dimmable driver with circuit overload, short circuit, and low-voltage nchedo.
- Ogologo ndụ: Calculated lifespan up to 180,000 hours.
- Asambodo: UL and DLC Premium certified.
Ntọala na nwụnye
The ASD 2x2 LED Flat Panel Light offers multiple mounting options: recessed, suspended, and surface mount. This section details the recessed installation process. For suspended or surface mount installations, additional hardware (sold separately) is required.
Recessed Installation Steps:
- Kwadebe panel: Lift all mounting clips along the edges of the panel. Turn the mounting clip head outwards.
- Njikọ eletrik: Connect the wires into the junction box of the panel. Match the neutral (N), live (L), and ground (G) wires using appropriate wire nuts. Ensure power is disconnected before making any electrical connections.
- Chekwaa panel ahụ: Adjust the panel into place within the ceiling grid. Ensure the clips are securely fastened to the ceiling's T-BAR/T-GRID.
Image: Step 1 shows how to adjust the mounting clips on the LED panel.
Image: Step 2 illustrates connecting the electrical wires to the panel's junction box.
Image: Step 3 shows the final placement and securing of the LED panel in the ceiling grid.
Nhọrọ Nkwanye ndị ọzọ:
The panel supports surface mount (with ASD-FDW-ELP24 frame) and suspended mount (with ASD-CHS4 kit). These accessories are not included and must be purchased separately.
Image: This diagram illustrates the three available mounting methods: recessed, surface, and suspended.
Ntuziaka ọrụ
Okpomọkụ agba na Wattage Nhọrọ:
The LED panel features selectable color temperature (CCT) and wattage settings. These can be adjusted using switches located on the fixture before installation or by using the remote control (sold separately).
- Okpomọkụ agba: 3500K (Neutral White), 4000K (Cool White), 5000K (Daylight).
- Wattage Nhọrọ: 20W, 25W, 30W.
Image: This image displays the switches for selecting desired color temperature and wattage.
Microwave Motion Sensor Operation:
The integrated microwave motion sensor detects movement and controls the light output. The sensor settings can be customized using the ASD-06RC remote control (ASIN B0D2KRKZHN), which is sold separately.
Image: This diagram shows the motion sensor's detection range and configurable parameters like hold time, stand-by period, and stand-by dimming.
Remote Control Functions (ASD-06RC, sold separately):
| Bọtịnụ | Ọrụ | Okwu |
|---|---|---|
| Gbanye/ Gbanyụọ | Gbanyụọ/ Gbanyụọ ihe mmetụta. | |
| Akpaaka | Enter "sensor mode" and perform previous settings. | |
| Tọgharia | Enter "sensor mode" and perform the default settings. | |
| Ihe nkiri | Na-egosi ntọala ugbu a echekwara na ime ime. | |
| Malite | Pịa nke a ka ịmalite nhazi ọnọdụ. | |
| Ebe nchekwa | Saves the scene settings. | |
| Tinye | Na-etinye ntọala ọnọdụ ugbu a na nrụnye. | |
| Nrịgo elu | Adjust detection area/sensitivity levels according to real installation situations, higher or lower. | |
| Ziga | Memorizes and sends out the previous setting of individual parameters. | |
| Oke nchọpụta | Also known as "Sensitivity". 100% means the highest sensitivity and longest distance. Use this button and the +/- buttons to adjust. | |
| Ihe mmetụta ìhè ụbọchị | The preset lux level at which motion will be detected. Use this button and the +/- buttons to adjust. | |
| Ndabere na Dimming | After hold time, the light will dim from 100% to optional stand-by dimming levels. Use this button and the +/- buttons to adjust. | |
| Jide oge | The period that light will stay illuminated 100% after no motion is detected. Use this button and the +/- buttons to adjust. | |
| Oge echere | The period after hold time, during which the light keeps stand-by dimming level. Use this button and the +/- buttons to adjust. | |
| +/- | Isi bọtịnụ na-arụ ọrụ iji dozie ihe ndị ahụ na ọkwa achọrọ. | |
| Ala | Press "-" button to dim light directly to non-detection mode. | |
| CCT nwere ike ịhọrọ | Not applicable to this product. | |
| Ike | Adjust brightness in ON/OFF mode & sensor mode, minimum 10%, max 100%, each time this button is pressed it is changed by 3%. | |
| Bọtịnụ echekwara | Not applicable to this product. | |
| Owuwe ihe ubi n'ehihie | Agbanyere ma ọ bụ gbanyụọ ọrụ iwe ihe ubi. | |
| Bọtịnụ nwale | Press this button to test the sensor, it will temporarily change the hold time to 2s. This setting cannot be saved. |
Image: The ASD-06RC remote control, used for adjusting the motion sensor settings.
Nlekọta
The ASD 2x2 LED Flat Panel Light requires minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:
- Nhicha: Kwupu ike tupu ihicha. Jiri nro dị nro, kpọrọ nkụ, ma ọ bụ ntakịrị damp cloth to wipe the surface of the panel. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or optical components.
- Nyocha: Periodically inspect the fixture for any signs of damage, loose connections, or wear. If any issues are found, disconnect power and contact a qualified electrician for repair.
- Ndokwa bọlbụ: The LED light source is integrated and not user-replaceable. The fixture has a long lifespan, reducing the need for frequent replacements.
Nchọpụta nsogbu
If you encounter issues with your LED Flat Panel Light, refer to the following common troubleshooting steps:
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Ìhè anaghị agbanwuo. | Enweghị ike ọkụ eletrik; waya na-adịghị ike; ihe eji arụ ọrụ nwere nsogbu. | Check circuit breaker/fuse. Ensure all wiring connections are secure. If problem persists, contact support. |
| Ìhè na-amagharị ma ọ bụ na-akụda na mberede. | Incompatible dimmer switch; unstable power supply; loose wiring. | Ensure a 0-10V dimming system is used. Verify stable power. Check wiring connections. |
| Motion sensor not detecting movement or activating incorrectly. | Incorrect sensor settings; obstruction; sensor malfunction. | Adjust sensor settings using the remote control (hold time, detection range). Ensure no obstructions block the sensor. Reset sensor to default settings. |
| Color temperature or wattage not changing. | Switches not set correctly; remote control issue. | Verify physical switches on the fixture are set to desired CCT/wattage. If using remote, ensure it's paired and functioning. |
Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Nọmba nlereanya | A-BLP-22A30-MS |
| Akụkụ (L x W x H) | 23.74" x 23.74" x 1.37" (603mm x 603mm x 35mm) |
| Wattage | Selectable: 20W / 25W / 30W |
| Icha ọkụ | Up to 3633 Lumens (at 30W) |
| Okpomọkụ agba (CCT) | Selectable: 3500K (Neutral White) / 4000K (Cool White) / 5000K (Daylight) |
| Voltage | 120-277V |
| Enwere ike ibelata | Yes, 0-10V Dimming |
| Sensọ ngagharị | Built-in Microwave Motion Sensor |
| Usoro njikwa | Remote (ASD-06RC, sold separately) |
| Ihe onwunwe | Aluminum, Iron, Polycarbonate |
| CRI | >80 |
| Ogologo ndụ | 180,000 hours (calculated) |
| Asambodo | UL, DLC Premium |
| Ụdị nwụnye | Recessed, Surface Mount (kit sold separately), Suspended (kit sold separately) |
| Ojiji ime ime/n'èzí | Iji ime ụlọ naanị |
Akwụkwọ ikike
ASD na-enye ihe Akwụkwọ ikike dị afọ 5 for this product. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, please refer to the official ASD websaịtị ma ọ bụ kpọtụrụ nkwado ndị ahịa.
Nkwado
For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact ASD customer support.
- Akụrụngwa dị n'ịntanetị: Visit the official ASD website for additional product information, FAQs, and support documents.
- Ozi mkpọtụrụ: Refer to the product packaging or the ASD websaịtị maka nkọwa kọntaktị ọrụ ndị ahịa kachasị ugbu a.
Ngwa ndị ọzọ
For a quick and hassle-free installation, you can also refer to the step-by-step manual available on our website or through the product's Amazon listing.
Akwụkwọ ntuziaka onye ọrụ (PDF): Budata PDF
