Okwu mmalite
Thank you for choosing the Addiesdive AD2063 GMT Quartz Watch. This manual provides detailed instructions for the proper setup, operation, and maintenance of your timepiece. Please read this manual carefully to ensure optimal performance and longevity of your watch.
Image: The Addiesdive AD2063 GMT Quartz Watch, showcasing its beige dial, stainless steel case, and bracelet.
Ntuziaka nhazi
Before using your watch, it is important to set the time, date, and GMT function correctly.
1. Crown Positions
The crown on your Addiesdive AD2063 watch has three positions:
- Position 0 (Pushed In): Normal operating position, screw-down for water resistance.
- Position 1 (First Click Out): Used for setting the date and GMT hand.
- Position 2 (Second Click Out): Used for setting the main time (hour and minute hands).
Foto: A nso nso view of the watch crown, which is used for adjustments.
2. Isetịpụ Oge
- Unscrew the crown counter-clockwise until it springs out to Position 0.
- Gently pull the crown out to Ọnọdụ 2 (second click). The second hand will stop.
- Rotate the crown clockwise or counter-clockwise to set the desired time. Ensure the 24-hour GMT hand is also correctly aligned with the main time if you are setting the primary time zone.
- Once the time is set, push the crown back into Ọnọdụ 0 and screw it clockwise firmly to ensure water resistance.
Video: Demonstrates how to adjust the time and date on the Addiesdive AD2063 watch using the crown.
3. Ịtọ ụbọchị
- Unscrew the crown counter-clockwise until it springs out to Position 0.
- Gently pull the crown out to Ọnọdụ 1 (first click).
- Rotate the crown counter-clockwise to adjust the date. Avoid setting the date between 9 PM and 3 AM, as this can damage the movement. If the current time falls within this period, first set the time outside this range, adjust the date, then reset the time.
- Once the date is set, push the crown back into Ọnọdụ 0 and screw it clockwise firmly to ensure water resistance.
4. Setting the GMT (Second Time Zone) Hand
The GMT hand operates on a 24-hour scale. To set it:
- Unscrew the crown counter-clockwise until it springs out to Position 0.
- Gently pull the crown out to Ọnọdụ 1 (first click).
- Rotate the crown clockwise to adjust the GMT hand. This hand moves independently of the main hour and minute hands in this position.
- Once the GMT hand is set to your desired second time zone (on a 24-hour scale), push the crown back into Ọnọdụ 0 and screw it clockwise firmly to ensure water resistance.
Image: The watch dial highlighting the GMT hand, which indicates a second time zone on a 24-hour scale.
5. Adjusting the Bracelet
The stainless steel bracelet can be adjusted by removing or adding links. It is recommended to have this procedure performed by a qualified watchmaker to avoid damaging the bracelet or watch.
Image: The watch's stainless steel bracelet and clasp mechanism.
Na-arụ ọrụ Watch gị
Mmiri Nguzogide
Your Addiesdive AD2063 watch is rated for 200 meters (20 ATM) water resistance. This makes it suitable for professional marine activity and serious surface water sports, but not for saturation diving. Always ensure the crown is fully screwed down before exposing the watch to water.
- 200M / 20 ATM: Suitable for swimming, snorkeling, and recreational diving.
- Do not operate the crown or pushers when the watch is wet or submerged.
- Avoid exposing the watch to extreme temperature changes, which can affect water resistance seals.
Nlekọta
Proper maintenance will help preserve the appearance and function of your watch.
Nhicha
Wipe the watch case and bracelet regularly with a soft, dry cloth. For stainless steel, a slightly damp cloth can be used, followed by a dry cloth. Avoid using chemical cleaners or abrasive materials.
Ngbanwe batrị
As a quartz watch, your AD2063 is powered by a battery. When the battery runs low, the second hand may start skipping seconds (End-of-Life indicator). It is recommended to have the battery replaced by a professional watchmaker to ensure the watch's water resistance is maintained.
Water Resistance Checks
To maintain the stated water resistance, it is advisable to have the watch's seals checked and replaced by a professional watchmaker every 2-3 years, or after any impact to the watch.
Nchọpụta nsogbu
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Lelee anaghị agba ọsọ | Batrị agwụla | Replace battery by a professional watchmaker. |
| Ụbọchị anaghị agbanwe | Oge nhazi ụbọchị ezighi ezi (9 PM - 3 AM) | Adjust time outside the restricted period, set date, then reset time. |
| Mmiri dị n'ime elekere | Crown not screwed down, damaged seals | Immediately take to a professional watchmaker for inspection and repair. Ensure crown is always screwed down. |
| GMT hand not synchronized | Ntọala ezighi ezi | Refer to "Setting the GMT Hand" section and reset. |
Nkọwapụta
- Ụdị: AD2063
- Ntughari: 515-24H Quartz GMT
- Ihe gbasara ikpe: 316L Solid Stainless Steel
- Surface Mirror: Sapphire glass with clear AR-Coating
- Dayameta ikpe: 38 mm (without crown)
- Case Length (Lug to Lug): 46.7 mm
- Ọkpụrụkpụ ikpe: 12.5 mm
- Ogologo eriri: 20 mm
- Ogologo Band: 22 cm / 8.66 inch
- Nguzogide mmiri: 200 m / 20 ATM
- Ụdị okpueze: Okpu okpueze
- Ihe eriri: Igwe anaghị agba nchara
- Arọ: Ihe dị ka 134 g
Image: Technical diagram illustrating the dimensions and key specifications of the watch.
Ozi akwụkwọ ikike
Your Addiesdive AD2063 watch is covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your purchase for specific terms and conditions. The warranty typically does not cover normal wear and tear, accidental damage, or damage resulting from improper use or unauthorized repairs.
Nkwado ndị ahịa
For any questions, technical assistance, or service requests regarding your Addiesdive AD2063 watch, please contact the retailer or the manufacturer's customer service. Keep your purchase receipt and warranty card handy when contacting support.
You can visit the 1963 Watch Store on Amazon for more information: 1963 Watch Store
