Okwu mmalite
This manual provides detailed instructions for the installation, operation, and maintenance of your MOUNTUP TV Mounts, including the MU0057 Full Motion Wall Mount and the MU0049 Under Cabinet Mount. Please read this manual thoroughly before installation to ensure safe and correct usage.
Ozi nchekwa dị mkpa:
- Do not attempt installation if you are unsure about the process. Consult a qualified professional.
- Ensure the mounting surface can support the combined weight of the mount and your television.
- Always use the provided hardware and follow the instructions carefully.
- Debe ụmụaka na anụ ụlọ n'oge echichi.
- Periodically check all connections for tightness and security.
Ihe ngwugwu
Verify that all components are present before beginning installation. If any parts are missing or damaged, contact MOUNTUP customer support.
- 1 x MOUNTUP MU0057 Full Motion TV Wall Mount
- 1 x MOUNTUP MU0049 Under Cabinet TV Mount
- Hardware Kit (screws, anchors, washers, spacers, etc.)
- Akwụkwọ ntuziaka nwụnye (akwụkwọ a)
Foto: Ofeview of the MOUNTUP MU0057 Full Motion TV Wall Mount and MU0049 Under Cabinet TV Mount, including mounting plates and articulating arms.
Nkọwapụta
MOUNTUP MU0057 Mgbidi Mgbidi TV zuru oke
| Njirimara | Nkọwapụta |
|---|---|
| Nha TV dakọtara | 26-60 sentimita asatọ |
| Ike ibu | Ruo 77 lbs (35 n'arọ) |
| Ndakọrịta VESA | Max 400x400mm |
| Ụdị mmegharị | Articulating, Full Motion |
| Ihe onwunwe | Aluminum, Steel, or Composite Material |
MOUNTUP MU0049 Under Cabinet TV Mount
| Njirimara | Nkọwapụta |
|---|---|
| Nha TV dakọtara | 13-32 sentimita asatọ |
| Ike ibu | Ruo 22 lbs (10 n'arọ) |
| Ndakọrịta VESA | 75x75mm, 100x100mm |
| Ụdị mmegharị | Foldable, Tilt, Swivel, Rotation |
| Ihe onwunwe | Aluminum, Steel, or Composite Material |
Ntọala na nwụnye
Tupu ịmalite:
- Ensure you have all necessary tools (e.g., drill, stud finder, level, screwdriver).
- Verify the wall structure (for MU0057) or cabinet structure (for MU0049) can safely support the weight.
- Unpack all components and identify them using the parts list in your physical manual.
Installation of MOUNTUP MU0057 Full Motion TV Wall Mount
This mount is designed for installation on wood studs or concrete/brick walls. Do not install on drywall alone.
- Kpebie ebe mgbago: Use a stud finder to locate the center of the wood studs. Mark the desired height for your TV.
- Tinye efere mgbidi: Position the wall plate at the marked location. Use a level to ensure it is straight. Mark the drilling points.
- Oghere pilot: Drill pilot holes according to the recommended drill bit size for your wall type (wood stud or concrete).
- Efere mgbidi echedoro: Attach the wall plate to the wall using the appropriate lag bolts and washers. Tighten securely.
- Tinye eriri igwe onyonyo: Attach the two vertical TV brackets to the back of your television using the correct VESA screws, washers, and spacers. Ensure the brackets are centered and level.
- Kwunye TV n'elu mgbidi efere: Carefully lift the TV with the attached brackets and hook them onto the wall plate. Ensure the safety locks are engaged.
- Hazie na Chekwa: Adjust the tilt, swivel, and extension as desired. Tighten any adjustment screws to secure the TV in position.
Image: Components of the MOUNTUP MU0057 wall mount, including the wall plate, articulating arm, VESA plate, and a small level for installation.
Image: The MOUNTUP MU0057 long arm full motion TV mount extended from the wall, showing its maximum extension of 30 inches (750mm) and various arm segment lengths.
Image: The MOUNTUP MU0057 TV mount installed in a room corner, demonstrating its flexible arm folding capability for corner installations.
Installation of MOUNTUP MU0049 Under Cabinet TV Mount
This mount is designed for installation under cabinets or shelves. Ensure the cabinet/shelf material is sturdy enough to support the mount and TV weight.
- Kpebie ebe mgbago: Choose a suitable location under a cabinet or shelf. Ensure there is enough clearance for the TV to fold up and down.
- Tinye efere nkwụnye: Position the top mounting plate under the cabinet. Mark the drilling points.
- Oghere pilot: Drill pilot holes into the underside of the cabinet.
- Efere Nkwanye echekwara: Attach the mounting plate using the provided screws. Tighten securely.
- Tinye eriri igwe onyonyo: Attach the VESA plate to the back of your television using the correct VESA screws, washers, and spacers.
- Connect TV to Mount: Secure the TV (with VESA plate) to the main arm of the under cabinet mount.
- Test Folding Mechanism: Gently test the folding mechanism to ensure smooth operation and proper clearance.
Image: The MOUNTUP MU0049 under cabinet TV mount, showing its compact design and VESA plate.
Image: The MOUNTUP MU0049 under cabinet TV mount installed in a kitchen, illustrating its compatibility with VESA 75x75/100x100, max 32-inch screens, and 22 lbs weight capacity.
Image: The MOUNTUP MU0049 under cabinet TV mount demonstrating its foldable design, showing the TV folded up to 4 inches from the cabinet and folded back 135 degrees.
Ntuziaka ọrụ
MOUNTUP MU0057 Mgbidi Mgbidi TV zuru oke
- Mgbatị/Nlaghachi azụ: Gently pull or push the TV to extend or retract the arm.
- Swivel: Rotate the TV left or right to achieve the desired viewakụkụ n'akuku.
- Gbaa: Loosen the tilt adjustment knobs (if applicable), adjust the screen angle up or down, and then re-tighten the knobs.
- Ndozi ọkwa: Some models allow for minor post-installation leveling adjustments. Refer to your physical manual for specific instructions.
Image: The MOUNTUP MU0057 double arm folding TV mount, illustrating its ability to extend and swivel, allowing the screen to cross the wall for optimal viewing.
MOUNTUP MU0049 Under Cabinet TV Mount
- Mpịakọta/Mkpughe: Gently pull down the TV to unfold it from its stored position. Push it up until it locks into place to fold it away.
- Gbaa: Adjust the screen's vertical angle by tilting the TV up or down.
- Swivel: Rotate the TV horizontally (left or right) for optimal viewing.
- Ntughari: The mount allows for screen rotation (-90°/+90°) to switch between landscape and portrait orientation.
Image: The MOUNTUP MU0049 under cabinet TV mount demonstrating its adjustable viewing angles, including tilt (+3°/-10°), 360° swivel, and -90°/+90° rotation.
Nlekọta
- Nyocha oge niile: Na-elele skru niile, boltụ, na njikọ ha mgbe niile iji hụ na ha siri ike ma dịkwa nchebe.
- Nhicha: Clean the mount with a soft, dry cloth. Avoid abrasive cleaners or solvents that could damage the finish.
- mmanu mmanu: Moving parts are generally maintenance-free. If any movement becomes stiff, consult customer support before applying lubricants.
Nchọpụta nsogbu
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| TV is not level after installation (MU0057) | Wall plate not level; minor adjustment needed. | Check the wall plate with a level. Some mounts allow for post-installation leveling. Refer to your physical manual. |
| Ugwu na-eche ejighị n'aka | Screws not fully tightened; incorrect wall anchors used; wall/cabinet not strong enough. | Ensure all screws are securely tightened. Verify the mounting surface can support the weight. If unsure, consult a professional. |
| TV anaghị adaba na ihe mkpuchi ahụ | Incorrect VESA pattern; TV too large/heavy. | Verify your TV's VESA pattern, size, and weight against the mount's specifications (MU0057: 26-60 inch, 77lbs, Max 400x400mm; MU0049: 13-32 inch, 22lbs, 75x75/100x100mm). |
| Difficulty moving the mount | Adjustment screws too tight; lack of lubrication. | Loosen any adjustment screws slightly. If the issue persists, contact customer support. |
Akwụkwọ ikike na nkwado
MOUNTUP products are designed for durability and performance. For warranty information, technical support, or to report missing/damaged parts, please contact MOUNTUP customer service directly.
MOUNTUP Customer Support:
- Websaịtị: www.mountup.com
- Email: support@mountup.com
- Ekwentị: 1-800-XXX-XXXX
Please have your model number (MU0057, MU0049) and purchase information ready when contacting support.
