NICGIGA 5-Port Gigabit Outdoor Waterproof PoE Switch Instruction Manual

1. Okwu mmalite

This manual provides detailed instructions for the installation, operation, and maintenance of your NICGIGA 5-Port Gigabit Outdoor Waterproof PoE Switch. Please read this manual thoroughly before using the device to ensure proper functionality and safety. This unmanaged switch is designed for outdoor environments, offering reliable Power over Ethernet (PoE) connectivity for various devices.

2. Akụrụngwa Ngwaahịa

• 5-Port Gigabit Connectivity: Includes 4x 10/100/1000 Mbps PoE ports and 1 Gigabit uplink port.
• Nkwado PoE+: PoE ports support IEEE 802.3af/at standards, delivering up to 30W of power per port with a total PoE power budget of 78W. (Note: Only 48V PoE devices are supported).
• Ọdịnaya n'èzí: Features an IP65 protection grade and 4KV lightning protection design, suitable for harsh outdoor environments from -10℃ to +55℃ (14℉ to 131℉).
• One-Key VLAN: When VLAN mode is enabled, ports 1-4 are isolated from each other but communicate with the uplink port, enhancing network security.
• Unmanaged & Plug & Play: Supports power detection for PD devices, compatible with non-PoE devices for data connection. No software or configuration is required. Supports automatic MDI/MDIX and non-blocking data forwarding.

3. Ihe ngwugwu

Verify that all items are present and in good condition. If any item is missing or damaged, please contact your vendor.

• NICGIGA 5-Port Gigabit Outdoor Waterproof PoE Switch (Model: NOS-GS0410P)
• Installation Mount x 1
• Plastic Expansion Tube x 4
• skru x 4
• eriri USB x 3
• Ntuziaka mmalite ngwa ngwa

4. Ozi nchekwa

• Ensure the power source meets the device's voltage chọrọ.
• Emeghela ngwaọrụ casing; zigara ndị ọrụ ruru eru ọrụ niile.
• Protect the device from strong impacts and vibrations.
• Ensure proper grounding to prevent electrical hazards, especially in outdoor installations.
• Keep cables organized to prevent tripping hazards and damage.

5. Nhazi

5.1 Nwụnye anụ ahụ

The switch supports both wall-mounting and pole-mounting. Choose the appropriate method for your outdoor environment.

Figure 1: Wall-Mounting and Pole-Mounting Options

Wall-Mounting Steps:

1. Apply the positioning stickers to the desired wall location.
2. Drill holes and insert the plastic expansion tubes.
3. Fix the mount with screws.
4. Align the switch with the mount and snap it into place.

Pole-Mounting Steps:

1. Insert the three cable ties through the designated holes on the mount.
2. Tie the three straps securely to the pole.
3. Snap the switch onto the mount.

Figure 2: Detailed Mounting Instructions

5.2 Njikọ netwọkụ

The NICGIGA PoE switch is designed for plug-and-play operation, requiring no complex software configuration.

Figure 3: Plug and Play Connection Diagram

1. Connect your router or network backbone to the Gigabit Uplink Port (Port 5) on the switch.
2. Connect your PoE-powered devices (e.g., IP cameras, IP phones, wireless APs) to the PoE Ports 1-4.
3. Non-PoE devices (e.g., computers, routers, other switches) can also be connected to PoE Ports 1-4 for data transmission, as the switch automatically detects and provides power only to PoE-compatible devices.
4. Ensure the power cable is securely connected to a weather-protected power outlet.

6. Ntuziaka ọrụ

6.1 Na-agbanye ike

Once all connections are made and the power cable is plugged into an appropriate outlet, the switch will power on automatically. The Power indicator LED will illuminate.

6.2 LED egosi

• Igwe ọkụ ọkụ: Na-egosi ọkwa ike nke mgba ọkụ.
• VLAN LED: Indicates whether the VLAN function is active.
• Igwe ọkụ njikọ/ Act (kwa ọdụ ụgbọ mmiri): Indicates network link status and activity for each port.

6.3 VLAN Function

The switch features a 'One Key VLAN' function. When enabled, this function isolates PoE ports 1-4 from each other, preventing direct communication between devices connected to these ports. However, all devices on ports 1-4 can still communicate with the uplink port (Port 5). This improves network security by segmenting traffic.

Figure 4: One Key VLAN Functionality

To enable or disable the VLAN function, refer to the physical switch on the device, typically labeled 'Default/VLAN'.

7. Nlekọta

• Nyocha oge niile: Periodically check the device and cable connections for any signs of damage or wear, especially in harsh outdoor conditions.
• Nhicha: Gently wipe the exterior of the switch with a soft, dry cloth. Do not use liquid cleaners or aerosols.
• Mmelite femụwe: As an unmanaged switch, firmware updates are typically not required. If any specific updates are released, they will be communicated by the manufacturer.
• Nchekwa gburugburu: While waterproof, ensure the device is installed in a location that minimizes direct exposure to extreme weather conditions to prolong its lifespan.

8. Nchọpụta nsogbu

9. Nkọwapụta

10. Akwụkwọ ikike na nkwado

Every NICGIGA PoE switch undergoes rigorous testing for reliability, quality, and performance. We provide a one-year warranty for the product and lifetime technical support.

For technical assistance or warranty claims, please contact NICGIGA customer support through the official websaịtị ma ọ bụ ikpo okwu ịzụrụ ihe.