1. Ngwaahịa gafereview
The AQQA Aquarium Heater is designed to maintain a stable and optimal temperature for your aquatic environment. This intelligent submersible heater features advanced safety mechanisms, including over-temperature and dry burning protection, ensuring a safe and reliable heating solution for your fish tank.
Image 1.1: AQQA Aquarium Heater with its digital controller and heating element.
Akụkụ ndị bụ isi:
- Oke okpomọkụ: Adjustable from 59°F-93°F (15°C-34°C).
- Nchekwa ọkụ ọkụ: Automatic power-off when the heating rod is out of water by 2.4 inches or more.
- Nchekwa oke okpomọkụ: Stops heating and flashes an alarm if water temperature exceeds the set temperature by 3°F/3°C.
- Intelligent Heating: Activates when water temperature is 1°F/1°C below the set temperature and stops upon reaching it.
- Fahrenheit/Celsius Conversion: Easily switch between units by pressing the button for 5 seconds.
- Ọrụ ebe nchekwa: Retains settings after a power outage.
2. Ntọala na nwụnye
Proper installation is crucial for the safe and efficient operation of your AQQA Aquarium Heater. Please follow these guidelines carefully.
Nkwanye:
- The heater must be completely immersed in water before being energized.
- Ensure the heating rod is placed in an area with good water circulation to distribute heat evenly.
- Avoid placing the heater directly in the substrate to prevent overheating or damage.
- For optimal temperature accuracy, consider tilting the heating rod by approximately 30 degrees.
Image 2.1: Illustrations demonstrating correct and incorrect heater placement for full immersion.
Ntọala izizi:
- Mount the heating element securely inside the aquarium using the provided suction cups, ensuring it is fully submerged.
- Attach the digital controller to the outside of the aquarium glass using its suction cups, ensuring the display is easily visible.
- Connect the heating element to the controller and then plug the controller into a power outlet.
- Allow the heater to acclimate to the water temperature for at least 15-20 minutes before setting the desired temperature.
3. Ọrụ
The AQQA Aquarium Heater features an intuitive digital controller for easy temperature management.
Image 3.1: The digital controller displaying set and real-time water temperatures.
Ntọala okpomọkụ:
- Press the 'SET' button once to enter temperature setting mode. The set temperature will flash.
- Each subsequent press of the 'SET' button will increase the temperature by 1°F/1°C. The temperature range cycles from 59°F (15°C) to 93°F (34°C).
- After selecting your desired temperature, stop pressing the button. The display will flash a few times and then return to showing the real-time water temperature. The new setting is saved automatically.
Fahrenheit/Celsius Conversion:
- To switch between Fahrenheit (°F) and Celsius (°C), press and hold the 'SET' button for approximately 5 seconds. The display will change units.
Ọkụ egosi:
- A red whirl marquee light indicates that the heater is actively heating the water.
- A green whirl marquee light indicates that the set temperature has been reached and heating has stopped.
- If an error code occurs, the whirl marquee light will disappear.
Video 3.1: Official product video demonstrating the AQQA Intelligent Quartz Aquarium Heater's features and operation.
4. Atụmatụ nchekwa
The AQQA Aquarium Heater is equipped with multiple safety features to protect your aquatic life and ensure product longevity.
Image 4.1: Visual representation of the heater's overheating and anti-dry burning protection mechanisms.
Nchekwa ọkụ ọkụ:
- If the heating rod leaves the water surface by 2.4 inches or more, the heater will automatically power off.
- The error code indicator light in the upper left corner of the display will appear red and flash.
- Once the heating rod is fully re-immersed in water, the error code is automatically cleared, and the heater resumes normal operation.
Nchekwa oke okpomọkụ:
- If the heater detects that the water temperature is 3°F/3°C higher than the set temperature, the current water temperature number will flash to indicate a high-temperature alarm.
- Heating will stop until the water temperature drops to within 3°F/3°C of the set temperature, at which point it automatically returns to normal operation.
5. Nlekọta
Regular maintenance ensures the longevity and optimal performance of your aquarium heater.
Na-ehicha Igwe ọkụ:
- Due to prolonged immersion in water, scale can form on the heating rod, which may affect heat dissipation and potentially lead to safety issues.
- It is recommended to regularly disassemble the heating rod shell to clean the rod body.
- Always unplug the heater and allow it to cool completely before removing it from the water for cleaning.
- Use a soft brush or cloth to gently remove any scale or sediment. Avoid abrasive cleaners.
Image 5.1: Instructions for regular disassembly and cleaning of the heater to prevent scale buildup.
6. Nchọpụta nsogbu
This section addresses common issues you might encounter with your AQQA Aquarium Heater.
Okwu na azịza ndị nkịtị:
- Igwe ọkụ anaghị agbanwu: Ensure the power cord is securely plugged in and the outlet is functional. Check if the dry burning protection is activated (red flashing error code).
- Temperature display flashing red: This indicates the over-temperature protection is active. The water temperature is 3°F/3°C higher than your set temperature. The heater will stop heating until the temperature normalizes.
- Error Code 'E0' displayed: This indicates the dry burning protection is active, meaning the heating rod is not fully submerged in water. Re-immerse the heater completely to clear the error.
- Ọgụgụ okpomọkụ na-ekwekọghị ekwekọ: Ensure the heater is placed in an area with good water circulation. Check for excessive scale buildup on the heating element and clean if necessary.
- Temperature not reaching set point: Verify the heater wattage is appropriate for your tank size (refer to specifications). Ensure the heater is fully submerged and clean.
7. Nkọwapụta
Detailed technical specifications for the AQQA Aquarium Heater Model AQ068.
Image 7.1: Comprehensive table of specifications for AQQA Aquarium Heaters, including power ratings and tank capacities.
| Nkọwapụta | Nkọwa |
|---|---|
| Nọmba nlereanya | AQ068 |
| Ike | 1000W |
| Voltage/Ugboro ugboro | AC 110V-120V/60Hz |
| Application (Tank Size) | galọn 135-235 (511-890L) |
| Okpomọkụ ziri ezi | ±1°F / ±1°C |
| Oke njikwa okpomọkụ | 59°F-93°F/15°C-34°C |
| Akụkụ ihe (LxWxH) | 11.3 x 2.8 x 1.6 sentimita asatọ |
| Ibu Ibu | 2 pound |
| Onye nrụpụta | AQQA |
8. Akwụkwọ ikike na nkwado
Your AQQA Aquarium Heater comes with a manufacturer's warranty and dedicated customer support.
Ozi akwụkwọ ikike:
- A na-ekpuchi ngwaahịa a Akwụkwọ ikike nke onye nrụpụta afọ 1 site na ụbọchị ịzụrụ.
- Akwụkwọ ikike ahụ na-ekpuchi ntụpọ dị na akụrụngwa yana arụ ọrụ n'okpuru ojiji nkịtị.
- Biko dowe ihe akaebe nke ịzụrụ ihe maka akwụkwọ ikike.
Nkwado ndị ahịa:
For any questions, technical assistance, or warranty claims, please contact AQQA customer support through the retailer's platform or the official AQQA website. Our team is available to assist you with any issues you may encounter.
