Speed Unlimited 600C TFT Display User Manual

Okwu mmalite

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of the HALLOMOTOR Speed Unlimited 600C TFT Display. This advanced display is designed to seamlessly integrate with various Bafang mid-drive motors, including M200, M300, M400, M410, M420, M500, M560, M510, M600, M620, M800, and M820 models. It utilizes CAN protocol for reliable communication and offers a vibrant TFT screen for clear data monitoring and customizable settings.

Ngwaahịa gafereview

HALLOMOTOR 600C TFT Display with CAN Protocol

Foto 1: N'ihu view of the HALLOMOTOR 600C TFT Display, showing the screen and control buttons.

HALLOMOTOR 600C TFT Display compatible motors

Figure 2: The 600C TFT Display, highlighting its CAN version and compatibility with Bafang M200, M300, M400, M410, M420, M500, M510, M560, M600, M620, M800, and M820 motors.

HALLOMOTOR 600C TFT Display mounted on handlebars

Figure 3: The 600C TFT Display mounted on bicycle handlebars, demonstrating its 2.4-inch HD screen, multi-language support, multi-mode interface, and IP65 waterproof rating.

HALLOMOTOR 600C TFT Display installed on an e-bike

Figure 4: An installed view of the 600C TFT Display on an electric bicycle, showing its compact design and handlebar mounting.

Ntọala na nwụnye

1. Ihe ngwugwu

600C TFT Display Unit
Mounting Bracket (integrated)
eriri njikọ

2. Ịwụnye ihe ngosi ahụ

The 600C TFT Display is designed for handlebar mounting. Ensure the handlebar diameter is compatible with the integrated clamp (approximately Ø22.2mm as per dimensions). Position the display centrally for optimal viewing and access to buttons.

Loosen the mounting screw on the display's integrated clamp.
Place the display on your bicycle's handlebar in the desired position.
Tighten the mounting screw securely, ensuring the display is stable and does not rotate freely. Do not overtighten.

Figure 5: Technical dimensions of the 600C TFT Display, showing measurements in millimeters for width, height, and handlebar clamp diameter (Ø22.2mm).

3. Njikọ Ọdụdọ

Connect the display's cable to the corresponding port on your Bafang mid-drive motor system. Ensure the connectors are clean and dry before mating. The display uses a specific CAN protocol connector (often green, as shown in product images).

Locate the display connection port on your Bafang motor's wiring harness.
Align the male and female connectors of the display cable and the motor harness.
Push firmly until the connectors click into place, ensuring a secure and waterproof seal.
Route the cable neatly along the handlebars and frame, securing it with cable ties to prevent snagging or damage.

Ntuziaka ọrụ

1. Display Layout and Buttons

The 600C TFT display features a clear screen and intuitive button layout for easy control.

Power Button (middle): Turns the display and e-bike system on/off.
Up Button (+): Increases assist level, navigates menus upwards, or increases values.
Down Button (-): Decreases assist level, navigates menus downwards, or decreases values.
M Button (Mode): Cycles through display information, enters/exits settings menus.

2. Basic Ọrụ

Gbanyụọ/ Gbanyụọ: Press and hold the Power button for approximately 2 seconds to turn the system on or off.
Changing Assist Levels: Use the Up (+) and Down (-) buttons to adjust the motor's pedal assist level. The current level will be displayed on the screen.
Cycling Display Information: Press the M button briefly to cycle through various data displays such as speed (current, average, max), distance (trip, total), battery level, and power output.

3. Advanced Settings and Interface Modes

The 600C display supports multiple interface modes and customizable settings. Refer to the on-screen menu for specific options.

HALLOMOTOR 600C TFT Display multiple interface modes

Ọgụgụ 6: Ọpụamples of multiple interface modes available on the 600C TFT Display, including digital, simulation, basic information, and detailed information views.

Ịnweta Ntọala: Typically, pressing and holding the M button, or a combination of buttons, will enter the settings menu. Follow the on-screen prompts.
Nhazi: Within the settings, you may be able to adjust parameters such as wheel diameter, speed unit (km/h or mph), battery voltage, backlight brightness, and password protection.
Ụdị ihu: The display offers various visual layouts for data presentation. Navigate to the 'Interface Mode' setting to select your preferred view.

Nlekọta

Nhicha: The display is IP65 waterproof. Use a soft, damp cloth to wipe the screen and casing. Avoid abrasive cleaners or solvents. Do not use high-pressure water jets directly on the display.
Nchekwa: When not in use for extended periods, store the display and e-bike in a cool, dry place, away from direct sunlight and extreme temperatures.
Nyocha USB: Periodically check the display cable and connectors for any signs of wear, damage, or corrosion. Ensure connections remain secure.

Nchọpụta nsogbu

Nsogbu	Ihe nwere ike ime	Ngwọta
Ngosipụta anaghị agba ọkụ.	Low battery, loose connection, system fault.	Check e-bike battery charge. Ensure all cables are securely connected. If problem persists, consult a technician.
No speed or distance data.	Speed sensor issue, loose motor connection.	Check speed sensor alignment and connection. Verify motor connection.
Ngosipụta na-egosi koodu mperi.	Sistemu adịghị arụ ọrụ.	Note the error code and refer to your motor's manual or contact support for specific meaning and resolution.
Bọtịnụ anaghị anabata ya.	Temporary software glitch, physical damage.	Try restarting the display (power off and on). Inspect buttons for physical damage.

Nkọwapụta

Aha nlereanya: 600C TFT display with CAN protocol
Akara: HALLOMOTOR
Ụdị ngosi: TFT (Thin-Film Transistor)
Nha ihuenyo: 2.4-inch (HD display screen)
Usoro: CAN (Network Area Network)
ndakọrịta: Bafang Mid Drive Motors (M200, M300, M400, M410, M420, M500, M560, M510, M600, M620, M800, M820)
Ihe: Plastic
Agba: Nwa
Ụdị nkwụnye: Handlebar Mount (Ø22.2mm)
Ọnụọgụ enweghị mmiri: IP65
Ngwa gụnyere: LCD 600C CAN

Akwụkwọ ikike na nkwado

Ozi akwụkwọ ikike

This product comes with a limited warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the documentation provided with your purchase or contact HALLOMOTOR directly. Keep your proof of purchase for warranty claims.

Nkwado ndị ahịa

If you encounter any issues not covered in this manual or require further assistance, please contact the seller or HALLOMOTOR customer support. Provide your product model number and a detailed description of the issue for efficient service.

	Akwụkwọ Ọrụ Sistemụ na Ihe Ndị Dị na Bafang E-bike Drive 2023 Comprehensive workbook detailing Bafang's range of e-bike drive systems, motors, batteries, HMIs, controllers, sensors, and accessories for various applications including eMTB, eRoad, eTour, eCity, eCargo, and eFAT. Features technical specifications, compatibility information, and service tools.
	Panasonic EYFCA1WC: Njikọ njikwa na ntuziaka nhazi Akwụkwọ a na-enye nkọwa zuru ezu na ijikọ onye njikwa Panasonic na mpụta mpụta site na protocol mepere emepe, na-elekwasị anya na oke na ọrụ ogbe. Ọ na-ekpuchikwa nhazi maka ebe nnweta mpụga, nkọwa nka maka ụdị EYFCA1WC, yana koodu mperi mperi.
	Onye ndu Fox Electric igwe igwe ntuziaka na-arụ ọrụ na ntuziaka Ntuziaka ọrụ zuru oke, nkọwapụta, na ntuziaka nchọpụta nsogbu maka igwe igwe eletriki Fox Fox, na-elekwasị anya na ụdị Lucas na Bafang M420 eletriki set.
	Ntuziaka na Ntuziaka Onye Ọrụ Ngosipụta Bafang Nduzi a na-enye ozi zuru ezu gbasara ịrụ ọrụ na nghọta nke panel njikwa ngosipụta Bafang maka igwe eletriki, na-ekpuchi atụmatụ dịka njikwa ọkụ, ụdị nkwado, enyemaka ije, data njem, na akara ngosi.
	Akwụkwọ ntuziaka nwụnye TSDZ2 Central moto mbanye Ntuziaka nrụnye zuru oke maka YOSE POWER TSDZ2 Central Motor Drive System, na-akọwa usoro maka moto, ngosi, na ntinye ihe mmetụta ọsọ ọsọ, njikọ sistemu na ndepụta akụkụ.
	Onye ndu Fox Electric igwe ntuziaka na-arụ ọrụ Comprehensive operating instructions for Leader Fox electric bicycles, covering setup, usage, maintenance, and troubleshooting. Includes details on the e-bike system, battery care, LCD display functions, and controller settings.

HALLOMOTOR 600C TFT display with CAN protocol