Okwu mmalite
This manual provides instructions for the Grundig Wireless LED Light Bar with Motion Detector. This smart LED lamp is designed for use in cabinets, closets, kitchen furniture, or any dark area requiring additional illumination. It features a sleek design and offers three operating modes: continuously on, off, and automatic motion detection.
Ntọala na nwụnye
Follow these steps to install your LED light bar:
- Mount the Metal Brackets: Select the desired location for the light bar. Mount the two metal brackets, ensuring a minimum spacing of 20 cm (approximately 7.9 inches) between them.
- Place the LED Lamp: Carefully place the LED light bar into the mounted metal brackets.
- Mgbakwụnye echekwara The integrated magnets within the light bar will securely hold it in place on the metal brackets.
Image: Grundig Wireless LED Light Bar with Motion Detector. The image shows the sleek, white LED light bar, highlighting its compact design suitable for under-cabinet installation.
Ụdị arụ ọrụ
The Grundig LED Light Bar offers three operating modes for versatile use:
- N'Ụdị: Ìhè ahụ na-anọgide na-enwu.
- Gbanyụọ ọnọdụ: Agbanyụrụ ọkụ.
- AUTO (Motion Detection) Mode: The light automatically turns on when motion is detected and turns off after a period of inactivity. This mode is energy-efficient.
To switch between modes, locate the mode selection switch on the device and slide it to the desired setting.
Nlekọta
To ensure optimal performance and longevity of your Grundig LED Light Bar, follow these maintenance guidelines:
- Nhicha: Wipe the surface of the light bar with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the finish.
- Ịchaji: Recharge the light bar via its USB port when the battery is low. Ensure you use a compatible 5V DC, 1A power source.
- Nchekwa: Ọ bụrụ na ị na-echekwa ngwaọrụ ahụ ruo ogologo oge, hụ na chajịrị ya nke ọma ma chekwaa ya n'ebe dị jụụ na nkụ.
Nchọpụta nsogbu
If you encounter issues with your LED light bar, refer to the following common solutions:
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Ìhè anaghị agbanwuo. | Batrị agwụla. | Recharge the light bar using the provided USB cable. |
| Motion sensor not working in AUTO mode. | Insufficient ambient light or sensor obstruction. | Ensure the sensor is not blocked and test in a darker environment. Verify the mode switch is set to AUTO. |
| Ìhè na-egbuke egbuke ma ọ bụ na-acha uhie uhie. | Batrị dị ala. | Recharge the light bar. |
Nkọwapụta
| Ụdị | Grundig |
| Nọmba nlereanya | 8711252574158 |
| Ike | 1.5 Watt |
| Voltage | 5 volts DC |
| Ugbu a | 1 Ampere |
| Ọnụọgụ nke LED | 48 |
| Flux na-egbuke egbuke | 85 Lumen |
| Akụkụ (L x W x H) | 0.45 x 3.6 x 0.15 cm |
| Ibu | 187 grams |
| Ihe onwunwe | Ọla |
| Agba | Ọcha |
| Atụmatụ pụrụ iche | Nchọpụta Motion |
| Isi Iyi Ike | Akwadoro batrị (USB enwere ike ịchaji) |
| Ụdị nwụnye | Ugwu elu |
| Ojiji akọwapụtara | Kitchen, Cabinet, Closet Lighting |
Akwụkwọ ikike na nkwado
Information regarding specific warranty terms and customer support contact details is typically provided with the product packaging or on the manufacturer's official website. Please refer to those resources for the most accurate and up-to-date information.
For further assistance, please contact Grundig customer service.