Akwụkwọ ntuziaka onye ọrụ GHB ABM700 Baby Monitor

1. Okwu mmalite

This manual provides comprehensive instructions for the setup, operation, and maintenance of your GHB ABM700 Baby Monitor. Please read this manual thoroughly before use and retain it for future reference. This device is designed to assist in monitoring your baby and is not intended to replace direct adult supervision.

2. Ihe ngwugwu

Chọpụta na ihe niile edepụtara n'okpuru dị na ngwugwu gị:

• 1 x GHB ABM700 Parent Unit (Monitor)
• 1 x GHB ABM700 Baby Unit (Camera)
• 2 x Power Adapters (for Parent Unit and Baby Unit)
• 1 x Akwụkwọ ntuziaka onye ọrụ

3. Ngwaahịa gafereview

Familiarize yourself with the components of your GHB ABM700 Baby Monitor system.

The image displays the GHB ABM700 Baby Monitor system. On the left is the white baby unit camera with a black front panel, lens, and infrared sensor. On the right is the white parent unit monitor with a 5-inch IPS display showing a live feed of a smiling baby. The monitor also features control buttons on its right side, including power, menu, and navigation controls.

3.1 Ngalaba Nne na Nna (Nleba anya)

• 5-inch 720P IPS Display: Provides a clear, wide-angle view nke nwa gi.
• bọtịnụ njikwa: Power, Menu, Navigation (Up/Down/Left/Right/OK), Talk, Volume.
• Antenna: For wireless signal reception.
• Nchaji ọdụ ụgbọ mmiri: Maka ijikọ nkwụnye ọkụ.
• Ọkà okwu/igwe okwu: Maka nzikọrịta ozi ọdịyo ụzọ abụọ.

3.2 Ngalaba ụmụaka (igwefoto)

• Igwefoto oghere: Captures video feed.
• Igwe ọkụ infrared: Enable automatic night vision in low light.
• Igwe okwu: Detects sounds from the baby's room.
• Ihe mmetụta okpomọkụ: Monitors the room temperature.
• Ọkà okwu: Maka nzikọrịta ozi ọdịyo ụzọ abụọ.
• Ike Port: Maka ọkọnọ ike na-aga n'ihu.
• Kachasị Button: Used for connecting the camera to the parent unit if needed.

4. Nhazi

4.1 Ịchaji Ngalaba Nne na Nna

1. Connect one power adapter to the Parent Unit's charging port.
2. Tinye nsọtụ nke ọzọ nke nkwụnye ọkụ n'ime oghere ọkụ.
3. Charge the Parent Unit fully before first use. A full charge provides approximately 10 hours of continuous monitoring or 22 hours in VOX mode.

4.2 Powering the Baby Unit

1. Connect the second power adapter to the Baby Unit's power port.
2. Plug the other end of the adapter into a power outlet. The Baby Unit requires continuous power to operate.

4.3 Positioning the Baby Unit

1. Place the Baby Unit on a flat surface in the baby's room, ensuring a clear, unobstructed view of the crib.
2. Keep the camera at least 1 meter (3 feet) away from the baby to prevent entanglement with cords.
3. Manually adjust the camera's angle to achieve the desired viewing area. Remote control of camera rotation is not supported.

4.4 Mmakọ mbụ

The Parent Unit and Baby Unit are typically pre-paired at the factory. If the connection is lost or you are adding an additional camera, refer to the 'Adding/Managing Cameras' section for re-pairing instructions.

5. Ntuziaka ọrụ

5.1 Gbanyụọ ma ọ bụ gbanyụọ

• To power on the Parent Unit, press and hold the Ike bọtịnụ ruo mgbe ihuenyo na-enwu.
• Iji gbanyụọ, pịa ma jide Ike button again until the screen turns off.

5.2 Mgbanwe olu

Jiri raara onwe ya nye Elu elu na Mpịakọta ọnụ buttons on the Parent Unit to adjust the audio level.

5.3 Ndozi ihie

Access the menu on the Parent Unit to adjust the screen brightness for optimal viewna -akasi obi.

5.4 Two-Way Talk (Intercom)

Pịa ma jide Kwuo okwu button on the Parent Unit to speak to your baby through the Baby Unit's speaker. Release the button to hear your baby.

5.5 VOX Mode (Voice Operated eXchange)

In VOX mode, the Parent Unit's screen and audio will automatically activate when sound is detected in the baby's room, conserving battery power. The unit will return to standby after a period of silence. Adjust VOX sensitivity in the menu settings.

Mbugharị dijitalụ 5.6

Use the navigation buttons on the Parent Unit to digitally zoom in or out on the video feed for a closer view nke nwa gi.

5.7 Ọhụụ abalị

The Baby Unit automatically activates its infrared night vision function in low light conditions, providing a clear black and white image of your baby without disturbing their sleep.

5.8 Ngosipụta okpomọkụ

The Parent Unit displays the real-time room temperature detected by the Baby Unit's integrated temperature sensor, helping you ensure your baby's comfort.

5.9 Adding/Managing Cameras

The GHB ABM700 system supports up to two cameras. To add an additional camera or re-pair an existing one:

1. Access the 'Camera Management' or 'Pairing' option in the Parent Unit's menu.
2. Select an available camera channel.
3. Follow the on-screen prompts to initiate pairing.
4. Pịa Ijikọta button on the back of the Baby Unit within the specified time frame.
5. Once successfully paired, the image from the new camera will appear on the Parent Unit.

6. Nlekọta

6.1 Nhicha

Wipe the Parent Unit and Baby Unit with a dry, soft, lint-free cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the surfaces.

6.2 Battery Care (Parent Unit)

To prolong battery life, avoid exposing the Parent Unit to extreme temperatures. If storing the unit for an extended period, charge it periodically to maintain battery health.

7. Nchọpụta nsogbu

If you encounter issues with your GHB ABM700 Baby Monitor, refer to the following common problems and solutions:

• No Signal or Poor Connection:
  • Ensure both units are powered on and within range. The system uses 2.4GHz FHSS wireless technology.
  • Reduce the distance between the Parent Unit and Baby Unit.
  • Remove any large metallic objects or other electronic devices that may cause interference.
  • Try re-pairing the units as described in section 5.9.
• No Image or Sound:
  • Check that both the Parent Unit and Baby Unit are properly connected to their power adapters and turned on.
  • Adjust the volume and brightness settings on the Parent Unit.
• Short Battery Life on Parent Unit:
  • Ensure the Parent Unit is fully charged before use.
  • Utilize VOX mode to conserve battery power.
  • Belata nchapụta ihuenyo.
• Ọgụgụ okpomoku na-ezighi ezi:
  • Ensure the Baby Unit is not placed near heat sources (e.g., radiators, direct sunlight) or air vents.

8. Nkọwapụta

9. Ozi nchekwa

• Ihe ize ndụ ịnwụ anwụ: Keep all power cords and cables out of reach of children (at least 1 meter / 3 feet away). Never place the camera or cords within the crib or playpen.
• Mmiri na mmiri: Do not expose the units to water, moisture, or extreme humidity. This product is not waterproof.
• Ihe nkwụnye ọkụ: Use only the power adapters provided with this product. Using unauthorized adapters may damage the device and void the warranty.
• Isi mmalite ọkụ: Do not place the units near heat sources such as radiators, heat registers, stoves, or other heat-producing appliances.
• Igwe ikuku: Ensure proper ventilation around both units. Do not cover the units with blankets or other materials.
• Ntinye aka: Keep the monitor away from other electronic devices that may cause interference (e.g., microwaves, Wi-Fi routers).
• Nlekọta ndị okenye: This baby monitor is an aid and should not replace responsible adult supervision. Regularly check on your baby.

10. Akwụkwọ ikike na nkwado

For warranty information, technical support, and customer service, please refer to the documentation included with your purchase or visit the official GHB website. Please have your model number (ABM700) and purchase details ready when contacting support.